Installation :: Upgrade Install From The Same Build
Jul 5, 2015Upgrade install from the same build is that possible? I want to try an experiment.
View 8 RepliesUpgrade install from the same build is that possible? I want to try an experiment.
View 8 RepliesI am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
View 6 RepliesRight, so I've got a laptop that I'm currently trying to install windows 10 tp onto. It's the exact same model as the one I'm running on (it's my brothers, and I'm trying to fix it for him), but I've hit a snag.
The insider program website says that you can burn the .iso to a dvd and install it like that, but I've done that, and the laptop just stalls at a windows logo screen.
There's no operating system currently installed -- all 900 someodd GB are free and, using a windows 8 install disk to access a command prompt, DISKPART says the partition is healthy. I've cleaned and formatted it several times now to no avail.
I just build a new machine with a Gigabyte B85M-D3H mobo, Intel Pentium G3258 CPU, 4GB Corsair Value Select DDR3 1333 and 120GB Samsung EVO SSD. I now want to clean install Windows 10 Home (64-bit) from USB drive (created with media creation tool), but the machine is stuck in boot loop. The Windows logo appears for a few seconds and then the machine reboots, I don't have clue where in the boot process something goes wrong.
I already tried with a usb stick with Windows 8 installation files and this starts without issues. I made sure Fast boot en secure boot were disabled but without success. Also already reset the BIOS with optimized settings.
The stick boots till the first screen on different other machines.
I just had to re-install W10 using the latest build offered by the Microsoft Setup Tool because W10 on one machine became corrupted somewhere along the multiple update path! No problems, except it seems that a few of the default settings are a little different than they were in previous downloads. Most are for the better. But...I can't seem to figure out how to turn off the display of all the disk drives in the Navigation Pane of File Explorer. I have five other systems that have migrated successfully along the update path and they don't look like the screen shot attached. What or where is the setting to turn off the display of the disk drives when the "This PC" is collapsed.
View 9 RepliesI upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 RepliesI got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 RepliesI'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
I just finished an upgrade install of 10 from 7. I tested all programs and only had a problem with Avast and Microsoft Office Project 2007. The Avast problem is repaired.I double click to start the program > the "Office Project 2007" splash screen shows > the spinning orb blinks and it sits there for 15-20 seconds > then a "Configuration in Progress" window comes up > then a "Please wait while Windows configures MS Project" windows comes up > then I get an error : "There is not enough memory to complete this operation" > and that's it.I inserted my installation DVD and tried a Repair. I've tried to start Project in Safe Mode.
View 1 RepliesWindows 7 to windows 10 killed my windows 7 install.Is there a way to do the upgrade with out a complete install of windows 7.Using the windows 7 Lic Key.
View 3 RepliesThere is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
I have a feeling this is bios/uefi related
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
I did the upgrade on my Laptop from 8.1 to 10, went smoothly everything works so far. Now i have to decide do a reset and do a clean install since i always worry if later there will e a problem, should i safely think if no problems now that if i reformat a clean install that all drivers will be there and everything will be ok. Tomorrow i do my Alienware Aurora R4 desktop and prey it goes well. Then since i have 30 Hard Drives that i will be able to do a network share and be able to see it on my living room TV, will pray.
View 9 RepliesSo I've been using Windows 10 for the past two weeks now. I really dig it, however the hard drive I'm on is slightly slower than my 7200rpm drive which could boot Windows 7 up a lot faster.
I upgraded my Windows 7 installation to this current Windows 10 install and since I want to
1. Sell this current hard drive
and
2. Move to the other hard drive,
I'm in a bit of a dilemma here. I have a large amount of software and important documents installed on this pc.
In the event where I want to clean install to the other hard drive, I don't really want to be tasked with having to reinstall all of this software again, mostly because I don't have installers available for them.
So I guess I want to know what are the benefits to clean installing over upgrading on an already fast hard drive and what would be most convenient in my case if this option is more viable?
I've read differing opinions online over upgrade vs clean install and I want to know what I should do.
I have reserved my copy of Win 10 (upgrade from Win7 Pro 32bit retail) , but i plan to fit a SSD and instill the 64bit version of Win 10.
does windows 10 need to be upgrade installed first so Win 10 recognizes my hardware or can i download the ISO and do a clean install
or will i need to install Win 7 64bit then do the updates and then apply for the upgrade?
I've run the free Windows 10 upgrade twice on my Windows 8.1 laptop. Both times, Windows 10 would download. As my system restarted the install would take place and system finishes restarting. However, upon hitting the splash screen, I was back to Windows 8.1. Not sure why the install is failing. Each time, I receive a failure in the Windows Update popup. Did not have this problem on my desktop going from Windows 7 to 10.
View 2 RepliesWindows 10 ISO Upgrade from 7 Pro Failure: Blank Screen
Is there any way to install Windows 10 Upgrade from Safe Mode?
I have upgraded my 7 install to Windows 10 this morning. All works fine & 10 says my copy is genuine and validated.
After that, I decided to create a copy of 10 install on DVD with the Windows 10 tool.
At lauch of install, Windows doesn't recognize my old 7 key. I thought "ok maybe it will activate at the end of install"
But NO ! I get my clean & fresh install of 10 but it doesn't activate my copy.
So Win7/8 users who wants Win10, you should install your old version and make the upgrade manually. each time...
Upgraded grand-daughter's pc from 7 to 10. Seemed a bit sluggish running from a spinning HDD so I decided to do a clean install to a SSD using the same USB I had made to upgrade with. Installed just fine but now says the keys don't match and I have to buy a key? Thought the upgrade was tied to your hardware (motherboard/CPU) and a clean install after would be activated?
View 4 RepliesJust wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
View 3 RepliesI upgraded my Asus X205TA to Windows 10. However I wanted get a clean install so I went into recovery and chose to reset the PC and clean all apps,files, etc.
Whenever I try this it fails then gives me a blue screen with options. Only booting back to Win10 only works.
Is there a way I can get my win10 key and install from a win 10 download?
I did go back to Windows Download tool and had it create a USB stick. Can I use this to do a clean install?
I don't want to move on unless I know I can get Win 10 installed on this again. I know once I erase everythign my there is no option to go back to Win 8.1.
After installing Windows 10 - on the first login screen, when I enter my password pc is freezing up, after a few seconds it fades to black and then restarts. Cannot get past this part. The PC I'm upgrading is a Dell Inspiron laptop upgrading from Win7.
View 6 RepliesJust a curiosity of mine - Is there a difference between a clean install and performing an upgrade while keeping only the files? In other words, is this sort of upgrade the same as a clean install, only with the files restored to 'documents', desktop, etc.? Or, does the new windows folder contain remnants of the previous install.
View 1 RepliesI've done the upgrade on my 2 computers and then later I did a clean install on the laptop. What I'd like is to do a clean install on my desktop PC but I sure would love to bring back the things I setup when I did the upgrade such as the start page and desktop screens. My start screen is perfect and I hate to set it all back up from scratch if there is any way to keep it somewhere and return it.
I will say, the clean install has always been my preference with any version of windows and it certainly made a nice difference in many ways on the laptop that I've already done both the upgrade and later the clean install.
I've decided to upgrade my Windows 7 Ultimate to Windows 10 with the free upgrade. Unfortunately, it has been stuck "Checking for Updates" for the last 30-45 minutes. Is this normal? I've updated two laptops, one Windows 7 Home and one Windows 8 and it didn't take nearly this long. I'm afraid I'm stuck in some kind of loop.
View 4 RepliesI have BizSpark, and I'd like to upgrade my Windows 10 Home computer to the Pro version. I downloaded the "Multiple Versions" ISO from MSDN, but when I run it from within Windows, it only lets me re-install the Home edition. How do I upgrade without doing a clean install?
View 9 Replies