I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
View 9 RepliesUpgrade of Win7 HP laptop -- not usual failure code. Upgrade done through Windows Update (copy was reserved). Gets to 24%, restarts, bring up Recovery screen, fails with 0xc0000f -- a required device isn't connected.
Only one physical drive in the laptop -- works fine under Win7.
Have seen threads about problems with System Reserved being too small for Win10 (200MB for Win7 vs. 450MB for Win8). Tried shrinking C: and resizing System Reserved.
Repeats above problems -- plus, leaves laptop in weird mode with Win10 partially installed, a new Recovery partition, and nothing working (meaning, Win7 won't boot anymore).
Am now trying option of installing from DVD, after merging boot stuff into C: partition and removing System Reserved -- figuring that if Win10 requires a System Reserved partition, it knows how to create one the right size.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
Using the media creation tool (both usb and ISO) I get an error. Something like "installation has encountered an error during first_boot with sysprep." In not at my toshiba laptop at the moment so the wording may be a little off. Upgrading from my 8.1 current os. I just read about removing my eset antivirus before upgrading so I will remove that and my malwarebytes program as well and try again.
View 2 RepliesI tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 RepliesHaving the start menu critical error in Windows 10? (The error message says the issue will be fixed when you sign off, but that never fixes it.)
Since the start menu doesn't work, that also means you can't access any of your programs (apps) OR the internet, via Edge.
After searching on Microsoft's site, it appears this problem has been around at least since August, but there don't appear to be any real fixes for it.
Every time I try system image backup with my windows 10. It starts then stops with an error.
I had the same problem with windows 7, and someone gave me these instructions (click start run cmd hit enter run as administrator
fsutil usn deletejornal /n/d f:) run image again..
click start buton the search it "services" click microsoft shadow copy provider" right click properties then change disable to automatic, click apply.
Cannot upgrade to windows 10 from windows 7, Fails at 25% with error 0XC1900101 - 0X20004. How can I get around this error and what is causing error.
View 3 RepliesI downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
I have tried and tried to upgrade from WIN 8.1 to 10 with no success.
The error that comes up is "0x80070004 - 0x4000D The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."
I have removed all 3rd party antivirus, and a bunch of other fixes. A
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesI received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 RepliesThis update "Säkerhetsuppdatering för Internet Explorer Flash Player i Windows 10 Version 1511 för x64-baserade datorer (KB3119147)" (Swedish !!! but I bet You can guess my problem )stops att 95% when downloading. Have waited for hours.I have restarted several times but no diff result.
View 2 RepliesI followed steps for installation on SSD with UEFI Everything went well until the first restart after installation files reached 100% When screen came back it was back to original Install now screen.
I had disabled secure boot in firmware as suggested. SSD is the only drive attached at present. Should I attempt a reinstallation or are there other steps I should pursue first.
I am using a retail licensed Windows 10 Pro version installed on USB using Microsoft creation media.
Dell 8700 XPS
i7 4790 processor at 3.40 Ghz
16GB memory
2 TB HDD Windows 8.1 installed presently not connected
Kingston HyperX 120GB
I am trying to reset my pc but the process stops at 66% ... Is their any way to solve this problem....
View 3 RepliesI used the free download Windows 10 Update to go from Windows 8.1. Install went find and it comes to the login screen that says "Welcome Back". I click on the next button and a small blue circle comes up and spins but nothing happens beyond that. I unplugged external drives, cards, flash drives etc and tried a hard reboot but it still stops at the same spot. What can I do from here?
View 3 RepliesI've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
Im trying to install windows 10 final on my ASUS x205ta, but the problem being that it has a 32GB ssd, and there is nothing on it but the OS, yet i still have the error of it saying there is not enough space, what should i do?If i get the ISO and install it that way will i still run into these problems? Plus i dont know my product key since it is a free upgrade and windows offered it to me? Is there any way to do this? I hate windows 8 and much prefer windows 10,
View 1 RepliesI cannot start Windows my laptop. I can get into safe mode. I've tried to system restore and clean boot. I have tried verifier which gives the error iastor.sys
Attached are the zip files.
KEN-PC-07-Sep-15_233134_66.zip
I have a domain based on samba 4.1.17-Debian ... I bought 10 laptops with W7 preinstalled .... With some fiddling in the registry the can successfully join my domain and everything works perfectly.....
But ... after upgrading those PC to W10 ( with automatic upgrade) i cannot logon anymore on domain. (local logon is ok) ... I get the message " no access server is currently available to open the session " ( translated from french , so the english message can be slightly different...)
Note that with a local session I can see and access the shared folders (mydomainsharedfolder )on the domain pdc, meaning that i can eliminate an authentication or dns problem ...) Same behaviour on all laptops...
I recently upgraded to windows 10 and now my verizon wireless "VZ access manager" doesnt work right. It still connects, but When I go to the statistics page the tx rate and rx rate is 0. My laptop which is still windows 7 still works fine.
View 1 RepliesI clicked on the "View download progress" button and I get the message; "Something went wrong. Please try again later".
I should note that I got an error message earlier when upgrading that said I was getting the "update error 0x80080008". I eventually fixed that using a .bat file I learned from another site but now I'm getting this new error.
Mine Dell Dimension 9200 bought with Dell Wireless keyboard & mouse.
This has been working flawless inWin 7 Ultimate x64. The keyboard still uses the Dell's BT Mini Receiver and the Mouse is Logitec M510 with it's own Logitec unifying receiver.
Since my upgrade to Win10 just now, the wireless keyboard is non communicable with the system. The Logitech mouse is working.
Under device manager Bluetooth -Broadcom Bluetooth 3.0 USB has a yellow exclamation mark. My attempt to update the driver - gets a message as the latest is installed.
I'm trying to upgrade a Lenovo U410 to Windows 10, but I keep receiving this error:
0xC1900101 - 0x40017.
What this may be?