Installation :: Upgrade Will Not Fully Download - 6 Failed Attempts
Aug 3, 2015
I have two computers my laptop has updated to windows 10 with the automatic upgrade with no problems.
But my PC will not start the upgrade I was told to look in the temp folder $Windows.~BT.
The size of this folder was 5.88 GB. And had been like that for a couple of days.
After reading on [URL] .... It said that the upgrade might be corrupt I followed the advice and went to (Windows/ Software Distribution/ Download) and deleted everything in that folder. Then I ran the command prompt as an administrator. Type in "wuauclt.exe /updatenow".en as advised on the website.
Almost straight away the windows upgrade started again but it has gone back to the 5.88 Gb and stopped again
Looking at windows update and view update history I see there are 6 failed attempts to upgrade to windows 10 all with Error details code 80240020....
View 7 Replies
Similar Messages:
Aug 30, 2015
I have tried to update an older laptop to Windows10, three times, or roughly 8 gigs of data. In all three attempts it has failed and stopped at 32% of the installation; and in all three attempts Windows had to automatically roll back to Windows, in my case Windows7.
Searching for solutions, none of them work, one of those solutions is to disconnect all your peripherals and try again based on the error you see in the image. I only have one peripheral and I seriously doubt it would cause Windows10 not to update when I have the same device on another machine and the update to Windows10 worked successfully; although I disconnect the one peripheral and I was right, same problem, Windows10 failed to update ?
View 1 Replies
Nov 13, 2015
I've been trying to install the newest W10 update, but I've been having some trouble. I've tried 2 times to update my computer but it restores back to my previous version of windows because the update failed.
I've checked Event Viewer and all that gave me was "error 0x8024200D" and nothing else that I saw that could work.
I'm running Windows 10 Pro on Version 10.0.10240 (Build 10240)
View 2 Replies
Jul 31, 2015
After the Windows 10 upgrade my laptop cant shutdown fully. When i try to turn off my PC, everything goes well at the beginning, almost everything goes off. The things that remain on looks like to be only the fans and the LED of the power button. I dont know what to do.
View 18 Replies
Dec 24, 2015
I convinced my friend to upgrade to windows 10 on his laptop and it failed leaving it screwed.
The laptop is based on a Clevo W350ET chassis.
When you turn it on it goes to a screen saying 'Recovery Your PC/Device needs to be repaired, A required device isn't connected or can't be accessed, Error code 0xc000000f'.
Any options like revert to a previous built, system restore or whatever do not work.
Any chance of saving the current install or will I have to reinstall everything? My friend has old programs he is concerned he cannot get anymore.
View 3 Replies
Jan 31, 2016
My father hit yes to upgrad his HP Probook 6407b from Windows 7 to Win 10. He did not realize what he was saying yes to.He brought it to me before it finsihed. I got into win 10, but then had issues with HP security software at boot. It would hang at boot, say something about a finger print reader, and then allow me to log in. So I decided to revert back to win 7. that failed. Goes to try a startup repair and it does not work. It looks like win 7 trying to do it and not 10.
Is there any way to recover either win 7 or 10?I tried a win 10 usb drive, but it says the upgrade was previously started in windows, turn off machine and restart, but that fails.
View 9 Replies
Aug 4, 2015
I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?
View 2 Replies
Aug 7, 2015
I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
View 3 Replies
Sep 24, 2015
I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 Replies
Dec 10, 2015
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
View 9 Replies
Jul 30, 2015
I received the error shown as the installation started, the first reboot after downloading the files and updates.
View 3 Replies
Nov 18, 2015
For a while now I haven't been able to download any attachments in the mail app. Also my webmail now says, outlook (preview). So I'm not sure if that is a factor. Also the email is a hotmail.
View 1 Replies
Aug 6, 2015
Windows 10 download has been trying to update and failed at least 25 times, same error 80240020.
I have tried deleting files in the C;/windows/softwaredistribution/download and running wuauclt.exe/updatenow but no luck.
Download got to around 75% last night and failed.
View 1 Replies
Dec 6, 2015
My SSD only has 1GB of space left, but Microsoft keeps downloading its filth onto this drive, and soon it reaches to limit (I now only have 25 mb left) and notifies me that there's not enough space left for download & installation. But after I allocate the download to the D drive, the crap it downloaded earlier are still in the C drive, taking up all the space. How can I remove these things that I know Windows is not gonna use since it's now redownloading them to the D drive?
View 1 Replies
Aug 22, 2015
After unsuccessfully trying to installing windows 10,it was stuck on 46% for 17 hours.
I tried to reinstall my windows 7 Pro Disc,it wouldn’t boot and was not recognize the disc,l tried to load and boot an Linux Ubuntu & Mint via usb & disc,didn't work.
I tried an XP pro disc that l downloaded and burnt onto a CD,that loaded XP pro on my PC. Which seems to work apart from not been able to access the internet.
I'm thinking maybe l should wipe the hard-drive and try to reinstall my windows 7.
View 13 Replies
Nov 27, 2015
Once again, Windows 10 pro 32bit upgrade failed when it reached 71% installed.
I have an ASUS H81M-PLUS MB with intel core i7 processor.
As on previous attempts, a small window appeared with the caption "Microsoft Visual C++ Runtime Library" Below the caption was a small red circle with a cross in it and below that an uncaptioned button
Clicking on the button resulted in a message "Restoring previous Version of Windows" It then proceeded to do just that.
Having read other posts on this thread, for this attempt I disconnected all USB3 peripherals so that isn't the problem.
View 11 Replies
Aug 11, 2015
I can I get rid of this failed download and start again. When I try to do this ,the failed upgrade installs and then freezes at 91%. It is taking to 2.? Gb of my HDD so I know it is on the computer somewhere.
View 9 Replies
Feb 1, 2016
I have an H/P Pavilion g6 lap top. Tried to upgrade to Window 10 twice today. It seems to down load fine, and starts the install phase, when it gets to the black screen where it say it will restart many times, it starts copying files. It gets to 85/87% it shuts the power off to the computer. When you push the power button, it starts up, saying it is restoring previous version of Windows (8.1). Gives a dialog block with Red Shield and an (X) saying some updates were not installed, Error found C1900101-2004...
View 1 Replies
Dec 4, 2015
I've had issues with my CPU and mobo, so I got new ones from a friend, but there were vital pieces missing. I rebuilt my PC with all of its original parts as best as I could, and now Windows 10 is stuck at the logo with no circle. I followed my motherboard's manual for all the plug ins and whatnot, and everything seems to be in order, however the actions of my PC don't seem to demonstrate that.
View 6 Replies
Jun 1, 2015
Recently, I have seen that windows 10 is upgradable for free for windows 7, 8,8.1 users, but the problem is that I want windows 10 and keep my windows 7(For Various Reasons). Will there be a way to download the ISO and install it or is upgrading the only option ?
View 1 Replies
Nov 22, 2015
I downloaded windows 10 and then i woke up windows 10 is gone and so were my files.
View 1 Replies
Jul 29, 2015
I have a legit Win 7 laptop. I made a Win 10 reservation a few weeks back. Today, I went to microsoft[DOT]com/en-us/software-download/windows10 to download the "Media creation tool". I chose the 64-bit version because my laptop is 64-bit. The first 100 minutes was Downloading. Next 15 minutes was Verifying Download. Third stage was something about media center.
And then I got to a choice of a) Upgrade your PC now or b) Prepare USB drive (or something like this). I chose Option A. It got to 3% when I got this error message: Something happened. Setup has failed to initialize the working directorySee attached screenshot.
I thought to myself, "Well, the Windows 10 installation files are now on my hard drive. I won't have to wait 2 hours again." Well, I'm wrong. I double-clicked the Media Creation Tool exe file again, and it's back to downloading Windows 10 from 1% again!
View 10 Replies
Oct 18, 2015
I have a Surface Pro 2 and recently got the Windows 10 upgrade invite. However, the upgrade refuses to download. Every time it comes to 30-40%, there is some or the other error msg. I have tried the system support options. No change in situation...App
View 4 Replies
Mar 31, 2016
When I am upgrading my windows 8 into windows 10 I am not able to upgrade :( from last two times I download 9.8gb and at the end it shows file has been corrupted. Why it showing this error?
View 1 Replies
Aug 9, 2015
After upgrading from windows 8 to windows 10 the internet and download speed are so much lower.
My network card: Intel Dual Band AC-7260
View 1 Replies
Feb 26, 2016
Since upgrading to Windows 10 my computer won't shut down properly. I use the menu button shutdown and the screen goes blank, but the system does not fully shut down. The only way to get it to shut down is to hold the physical power button down till it shuts down. Then when I restart the system warns me that the last shutdown did not work properly and it gives me a choice to troubleshoot or restart. When I choose restart everything seems to load as normal.
View 53 Replies
