Installation :: What Partitions Does Windows Automatically Create During Install
Dec 18, 2015
I already have my pc updated with windows 10, I recently upgraded my hard drive with a samsung 850 pro ssd but i discovered that my recovery partition no longer works and when i try to do a system image windows says it cannot do it because files are missing . I used the samsung data migration software that came with my ssd, when i go to disk management it shows my three partitions which are
500mb recovery partition
260mb efi system partition
windows c 476.18 gb ntfs , boot,page file, crash dump, primary partition
My question is if I do a clean install of windows 10 will these partitions be created again during the windows 10 installation automatically or will I loose some . I want to be able to recover my pc should I need to and have everything working. Someone suggested that I don't need a recovery partition and windows 10 does not create new partitions .
I don't know what the efi system partition is and don't know if i need it . i have watched some youtube videos of people doing clean installs of windows 10 and they all seem to differ . during installation when given the choice of where to install windows some people delete all the partitions on their hard drive while others pick which one .
I want to clean install Windows 10, and I already did that before using the tutorial here. But last time I did not have Ubuntu install.
And in the tutorial, you must delete all partitions in order for Windows to create the special necessary partitions (Recovery, MSR, MBR etc..)
But now that I have a Linux partition that I don't want to delete, and according to the tutorial, Windows installation will not create these partitions.
How can I manually create them? Is it simply allocating a space for them and naming them the proper way and Windows will know how to use them? Or there's more than that? Also, What happens if I do not have these partitions?
I've upgraded from windows 8.1 with uefi bios, so basically now i can do clean install 10 without product key? But the real question is: My pc have 8 partitions, the primary one, 5 of recovery, 1 oem and 1 efi. Can i delete all partitions and create only one?
I have upgraded my Windows 8.1 system to Windows 10 through the Windows update app and have created an installation media USB stick. I want to clean install, something I am very familiar with, but not since the new uefi, gpt, legacy etc. that I'm not familiar with. If I do a clean install and delete the entire disk, Windows will create the partitions and install the necessary "data" to run the computer correctly? I don't need to save the data on the hidden partitions that are present now?
As the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...
I have a top spec HP Envy DV6 i7 laptop which had Windows 7 on it then upgraded to windows 8 then Windows 10. I have noticed that recently the machine has become really sluggish and Cortana is not working not matter what I try.
I have decided to clean install Windows 10 which I have on a USB stick but before I do that I noticed I have 8 partitions
See below:
What I want is to have just one partition and clean install Windows 10
So, how do I boot Windows from USB drive. How can I delete all the partitions and leave one...
Upgraded my Win 7 Ultimate x64 to Win 10. Now when I went to perform a clean install of the Win 10 with USB created from Microsoft Media, take me through to the screen to partitions.
There are three partitions, one marked as OEM. What could be this.
I put in new HDD two years ago and had done clean install of Win 7 then.
I had Acronis True Home Image 2012 but removed it prior this Win 10 upgrade
Am I save to erase all these partitions for my clean install?
Just wondering looking at my partitions after upgrading to windows 10 . Do I need to keep the last too partitions? I love windows 10 and had presumed that after a clean install my old windows 8 and 8.1 would be removed are these last too files remainders from them and if so can i delete and how should i do so. Just took a snip of the partitions content!
Recently upgraded to w10 from w8.1 via the upgrade option, then proceeded to make a USB boot with w10 and performed a clean install.
However, something is fishy with my system and w10 so for now i want to revert back to w8.1 via a clean install of w8.1
When i installed w10 however i noticed i have an abundance of partitions, and preferably i would only like to have my SSD and HDD as optional storage spaces. I do of course not want to delete any necessary recovery or system partitions, but to me it seems like i currently have too many.
Which of the partitions in the picture below can i delete? Is it safe to delete all the recovery partitions when clean installing w8.1 from usb? meaning that will the installation create the necessary partitions required by windows?
I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
I am having a problem trying to get Windows 10 Build 10041 installed on one of my computers. I am getting an error message(see screenshot) trying to create the account on install. I do not have this problem on build 9926.
I recently used a 16GB USB flash drive to create an installer for a new Linux distro. I noticed that the created partition is 8GB and the rest 8GB is unused. I want to create a second NTFS partition so I can use the USB as a recording medium for my PVR, but Disk Management doesn't give me this option. I then used MiniTool Partition Wizard Home Edition, which did create the partition but warned that it won't be recognized by Windows as it normally sees only the first partition on a USB Flash drive. I even went back to Disk Management and assigned a drive letter to the second partition, but in Explorer I see only the EFI partition (first, drive is formatted in GPT mode) with that drive letter. Is there any workaround? Of course I could just format the whole drive as NTFS, but I wouldn't like to do so until I don't need the installer anymore.
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
I am currently running Win7 Ultimate service pack 1 and am trying to create an installation of Win10 on a flash drive before I replace some parts inside my PC that will require an OS refresh. Unfortunately I am stuck at this screen.
I am sure my OS version is activated and I have extracted my windows key via Magical Jelly Bean finder but it rejected that key.
P.S. any PC stats linked to this account are a different piece of hardware
I had a kali linux installed in my computer. Then I tried to install Windows 10 using a bootable USB drive. (I created it by downloading the windows 10 ISO and then creating USB drive using Rufus.) But when I was trying to install windows 10, it shows my hard drive, but it doesn't installing to it. Error message is the following:
Code: We couldn't create a new partition or locate an existing one. For more information, see the Setup log files. Then I checked for the log file (X:Windowspanthersetupact.log) It has this message:
Code: LogReasons: [BLOCKING reason for disk 0: CanBeSystemVolume] The selected disk is not the computer's boot disk I know that right ? USB disk is the boot disk here. Then I searched in the internet for a solution.
I came up with this: [URL]...
I followed all the instructions there. Cleaned my hard disk using DISKPART and formatting and stuff. Then I rebooted my machine. But, still it shows the same error.
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
I have created extra partitions when I wanted to make a dual boot with Linux OS and Windows. I have had both Linux Mint and Ubuntu installed. After the second installation, I am not sure which of the partitions are used by Linux and which ones are used by Windows.
What I want to do, is simply get rid of all partitions, besides the ones used by Windows, but (I know it sounds dumb) I can't seem to find out which ones I can delete to go back to the original Windows boot (or if this is even possible without making a clean install).
I'm wanting to reinstall Windows 10 on my SSD. Before I do I'll unplug the additional drives I have inside my PC for storage (E: onwards), to isolate the SSD. However, C: (disk1 in the screenshot below) has several partitions and unlabelled volumes that I'm guessing Windows created. Do I remove all of them during the install process?
I purchased a Dell Inspiron 15 7000 with a 120GB SSD and a 1TB hard disk. I have the OS on the SSD (C:) together with the programs. So far I have installed Office 365 and little else. I have moved the data directories from C:Users to the D: drive.
The laptop came with no CDs or OS disks and Dell tell me none are available so I have created a recovery USB disk. At the end of that process it informed me that I could now delete any recovery partitions on the boot drive to create extra disk space. On trying this the option failed "Unable to delete partition". The reason for doing this is to recover the drive space used by 3 of the 5 partitions on the SSD. They take up over 32GB of the 120GB I bought. I've never needed to use a recovery partition and would have no issue with having to do a full install from CD or USB in future.
Disk Management does not have a "Delete partition" option for any of the SSD partitions. Would a re-install from the recovery USB stick allow me to delete all partitions on the SSD before re-installing or would they just get created again?
I have windows 10 build 1511 on a USB stick made by windows media creation tool now when install windows the drive has zero partitions.
When i install the copy from the USB stick i end up with 3 partitions one is 450MB (recovery partition) and another partition at 100MB called (EFI System partition) and last partition is windows 10.
Now if i delete all the partitions and install windows 10 from the USB drive again i get two partitions one at 500MB called (System Reserved) and the windows 10 partition.
Why if i install windows 10 multiple times i get different partitions being made?
I would like it to only make the two partitions every time.
I have attached an image of my Disk Management screen. Disk 0 doesn't look right to me. Is there a problem here? if there is, how do I correct this? I am running W10 and the C drive is a Samsung SSD drive.
