If I create a DVD with Windows 10 Home and try to perform a clean install on a computer that came with Windows 8/8.1 Home pre-installed. Will Windows 10 Home recognize and accept my genuine Windows 8/ 8.1 Home Key stored in UEFI or firmware etc?
By Clean install I mean not updating but directly trying to install on a computer, on which Windows 10 have never been installed before.
How do I set my BIOS to have the DVD boot and install Windows 10 in UEFI mode? I do see a setting on my Asus motherboard UEFI "CSM Compatability" and in there are three options:
UEFI and Legacy OPROM
Legacy OPROM only
UEFI only
Do I select UEFI only option here?
What is the benefit of installing in UEFI vs Legacy? All I understand is that the system sets up more partitions.
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
I have a Toshiba that I wanted to run Windows 10 Pro, the OEM was Home; I have Windows 7 Pro and decided to install that and do the upgrade and then a clean install, I needed to run Legacy Mode to install Windows 7, after the install and upgrade I wanted to change it to UEFI but since that isn't possible to do without doing a clean install or a recovery media device, I can't and don't want to do that.
If I do a clean install of Windows 10 Pro, from a USB and delete all partitions, will Windows 10 activate?
I have done so on my desktop, it has worked, BUT when I did it on my Toshiba after it activated to Windows 10 Home, it failed to activate during the clean install. What are the chances it won't activate this time? The process from Windows 7 to 10 isn't fast and I don't want to have to do that again..
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
View 5 RepliesI have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
View 6 RepliesOK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
I'm upgrading my mom's laptop from windows 7 to windows 10. Since my last upgrade I seem to have misplaced my USB Stick that has the UEFI Windows 10 install media on it. I do, however, have a few DVDs lying around that are large enough to make a Installation DVD. If I use the Microsoft Windows 10 Media Creation tool, will it create a UEFI Installation DVD?
View 4 RepliesI've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
So, I have Windows 10 already installed on my PC. I upgraded it last Summer from Windows 7 for free.
I've been trying to update it for the past 6 weeks but keep getting the error: "Windows 10 couldn't be installed. Windows can't be installed because this PC has an unsupported desk layout for UEFI firmware."
I have 3 hard drives and Win10 is running on my main SSD, disk 0. I remember having some funky upgrade issues and needed to unplug certain hard-drives due to strange ownership issues. Heres is a look from Disk Management. I've got an MSI m-board plus BIOS, all new.
[URL] ....
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6
GPT Partition Scheme for UEFI
Fat 32
8192 Default
X Quick Format
X Create a bootable disk using
X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
Okay, so the other week i received a new Clevo P650SE laptop. The laptop only had a 500GB 7200RPM HDD with Windows 10 to begin with, so yesterday i added my Samsung 840 EVO SSD. As i wanted this to now be the primary drive, i made another new installation of Windows onto here. After doing this, the system now displayed a boot selection at startup with the choice between the new Windows 10 installation on my SSD or the old one on the HDD.
As i no longer wanted to use the HDD for running Windows, i decided it would be best to delete Windows from this drive. So i booted onto an Ubuntu USB and wiped the entire drive of it's data in GParted, which included three different partitions. This seemed perfectly fine to me at the time, because i had a the new installation from the SSD showing up in the boot manager.
However, when i rebooted the machine and attempted to boot into the new installation on the SSD, it gives me this message:
"The boot configuration data from your PC is missing or contains errors.
File: /EFI/Microsoft/Boot/BC Error code: 0xc000000f"
I have tried everything to recover the system but nothing has worked. Startup repair from my Windows USB doesn't do anything, the system reset wouldn't operate because it stated that the partition was locked.
Nothing with the Command Prompt is working, I have done 'bootrec /fixmbr', 'bootrec /fixboot' and 'bootrec /rebuildbcd', but the last command returns the following error:
"The requested system drive cannot be found."
I also did 'bcdboot C:/Windows' but that also refused to work. I assumed the reason for this might be because the drive didn't have a letter, but when i attempted to add a letter is says:
"The specified drive letter is not free to be assigned."
Both drives in my laptop have now been completely wiped and converted to MBR, but even with the two drives empty the original message still appears when booting my Windows USB in UEFI.
I have only had this laptop a couple of weeks and it's already completely messed up. I can boot the Windows USB in Legacy and install Windows as normal, but of course i'm looking to have it back on UEFI as it was before.
I got a new Samsung SM951 M.2 PCI drive. I have a X99 motherboard but it didn't have the M.2 slot so I purchased an adapter to attach the drive and installed it into an open PCI slot.
When I first installed it and boot up under the current Windows 10, I could see the drive through Disk Management.
I disconnected the current Windows 10 version, put in the disk, booted up and selected the drive to perform a clean install. The initial copy and prepare for installation worked fine, then it needed to reboot and that's when I got the message:
Internal hard drive not found
No bootable devices
When I reconnected the old hard drive and booted up, I could see the install files on the new drive, but it just won't boot to it.
So, what do I need to do to get the PC to recognize this drive as bootable?
My system is home built, the boot drive being a Samsung 850 EVO series m.2 SSD. Win 10 was installed via USB, the ssd being the only installed drive. Installation was very quick and easy and once booted the PC performs very nicely.
However, very time it starts from shutdown, on the 1st attempt it reaches the Windows logo and shuts down.. I can guarantee that the 2nd attempt results in a perfect startup. I don't know if this: "BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys" is relevant.
All drivers seem to be up to date and working. Safe mode it starts 1st time. Fast boot enabled/disabled makes no difference.
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 RepliesMy laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesI upgraded to windows 10 but now I want to roll back to windows 8.1. In the future if I want to perform a clean install in my laptop will my windows 10 still be activated?
View 3 RepliesWhen I got my computer in 2012, I used Windows' own mover to move all files and settings over. I didn't know that that was a bad idea, and so ended up with a corrupted profile and some bad settings.
I am finally ready to do something about it.
Here's my setup:
* Windows 10 (which I am loving, by the way)
* Two drives, C and D. C is my boot drive.
I want to format a new SSD drive with a clean Windows 10 install and then replace my existing C drive with that new drive. I know this means I will have to reinstall everything that is on my existing C drive, but I'm fine with that.
Here are my questions:
1. How can I format my new SSD drive with Windows 10 and get it set up as my new C drive? I have a USB connector for the new SSD drive so I can access it from a USB port first; can I use that connection to install Windows on the drive? The new SSD came with software to clone my existing C drive, but of course that is not what I want; I want a clean install to get away from the corrupted install. Can Windows recognize and format a drive connected through a USB port?
2. When I put my new drive C into my computer, how do I tell my computer that I want that to be my boot drive?
3. Once I get the new SSD installed as my new drive C, how do I format my old drive C as a drive E with Windows 10? Again, I am fine with wiping out everything on that drive once I have a new C.
4. I have a lot of programs installed on my D drive and want to keep them there. Will I need to reinstall them? (Again, if so, I'm fine with that.) Or would symlinks work?
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
Any way to downgrade to my old windows 7.
I originally followed the path to upgrade my 8.1 Pro to Windows 10. Everything went fine and I created the USB during the process. Activation was OK.
Then after a few days and some unusual problems I reloaded my last Image of 8.1 Pro.
Question is Can I go back and just do a clean install since I have already did the upgrade process?
Second PC with Win 7 Pro 32 bit was a struggle...but succeeded in Brinks clean install and activation of 10...but was a real struggle.
Now...how can I transfer the new 10 install on an HDD to a new Sata SSD in the same box ? So far haven't figured out how to make the SSD with an installed image of the new 10 install from HDD to boot from the Sata at PC startup ?
What am I doing wrong...and how do I get the SSD image of my new 10 clean install to boot from the SSD ?
I think it has to do with partitions and active Windows partition but don't remember what/how to change the boot disk to the new SSD....
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 RepliesI did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 RepliesI got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 Replies