Installation :: Windows 7 OEM - Upgrade Then Clean Install Dual Boot
Sep 3, 2015
OK, I have Windows 7 OEM Version and want to upgrade to Windows 10 After I get Windows 10 Activated through the upgrade can I...
Clean install Windows 7 (with Original 7 key) and clean install Windows 10 (should automatically activate) to have a dual boot? Or is Microsoft going to block my activation saying you can't have both 7 and 10?
I have a different computer that has a OEM-Builders edition of Windows 7. I don't want Windows 10 on it right now as the software I need to run will not run on it but...
I want to upgrade to Windows 10 just to get the free upgrade and activate then revert back to Windows 7.
Later on down the road a year or so can I install Windows 10 with no problems activating it?
View 2 Replies
Similar Messages:
Dec 13, 2015
Read the tutorials but still not sure... I want to use my new SSD Win 10 Pro 64bit upgrade clean install via Brink's USB tutorial (when done setting everything up) and would like possibility to be able to dual boot with/to my old Win 7 Pro 64 SSD in same box.
Can this be done this way and what's the way to get the bios to play nice with the two Windows SSD operating systems ?
View 5 Replies
Sep 2, 2015
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
View 1 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Aug 17, 2015
I have the Windows 10 Pro ISO with a Windows 10 key. (from MSDN)
I want to install Windows 10 as dual boot with Windows 8.1. Both are x64.
Is it possible to install Windows 10 from the ISO? I know you can upgrade that way. But I want to do a clean install AND install alongside Windows 8.1.
View 9 Replies
Aug 2, 2015
I want to upgrade to Windows 10 to see how it works but... I also want to keep my Windows 7 in case anything goes wrong. So, how can I dual boot Win 10 with Win 7? It can be done when upgrading or I must download an .ISO file and burn it on a DVD? And I will also need some instructions about dual booting. By the way, I already backed up my files on my external hard disk if anything goes wrong.
View 1 Replies
May 26, 2015
I want to purchase a copy of Windows 10 Pro. I currently own Windows 7 Ultimate. I do not want to lose Windows 7 Ultimate because I have games and other files that I am concerned will be incompatible with Windows 10 in the same way that they are incompatible with Windows 8.
My system specs:
Intel Core i7-4790K
Asus ROG Maximus VII HERO
Club3D R9 290
Samsung 840 EVO 250GB SSD
Western Digital Black 1TB WD1003FZEX
Asus DRW-24B1ST DVD-RW
G.Skill Trident X DDR3-1600 CL7
The 840 EVO has Windows 7 Ultimate installed on it. There are many basic programs installed to this drive, such as Microsoft Office, my Daemon Tools, Fraps, and other "mission-critical" things that I want to access quickly and reliably.
My mass storage drive is the Western Digital Black drive. All my games are stored there, as Steam has a folder it reads most of its games from. A few other large programs are stored there. It only has one partition.
What I've been thinking of doing is when Windows 10 comes out, I want to grab a 256GB Samsung SM951 M.2 drive for my Maximus VII Hero and install Windows 10 onto that. I'm hoping that way, I can access my games via either Windows 7 or Windows 10, so that if there's compatibility issues, I can boot to either Windows 7 or Windows 10 and not have to worry about being able to play my games. I don't really want to do the free upgrade path because I'm concerned that it will replace Windows 7. I don't want that.
I'm also wondering if I can still run the games on the WD Black from Windows 10 using Steam launching from the SM951, as I currently do with Windows 7 on the 840 EVO.
I'm pretty certain that I won't be able to access Microsoft Office, which is on the 840 EVO imbedded into Windows 7's Program files. Or will I?
View 1 Replies
Aug 13, 2015
I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD
System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.
View 6 Replies
Aug 11, 2015
I just upgraded to Windows 10 and I would like to do a clean install. However My PC has a 1tb HDD as the C: drive and a secondary 25gb SSD drive called D:. I was wondering if there is a way to install the OS on the D: drive. I have done OS installs before so I am somewhat familiar with the procedure. I also already have a Windows 10 install USB set up. I just can't get it to offer the option of which drive to install on. The D: drive does currently have a folder on it labeled Drivers and in that folder there 14 folders such as Bluetooth, WLAN , and Card reader. Is this going to be an issue when installing Windows 10 on the D: drive or will Windows re-download these drivers itself?
View 1 Replies
Aug 10, 2015
Just a few final comments about the free upgrade.
1. Upgrading does not allow an installation with dual boot option.
2. Windows 7 is gone after one month. If you don't like it, too bad.
3. My "legacy" Dell colour laser printer will not function with Windows 10. It works flawlessly with Windows 7 and getting a new printer gets rid of the saving plus a lot more than the savings of a free W10. I will pass on the "free" upgrade.
View 6 Replies
Aug 3, 2015
I managed to upgrade from 8.1 to 10 with no issues, but I wanted a clean install - so I went through the reset process.
Unfortunately now it is stuck on a restart loop.
I get the message
"Your PC ran into a problem and needs to restart, we will restart for you
if you need to know more you can search later for this error: Inaccessible_device_error
I'm going to create an 8.1 usb with the media creation tool (tried to do one for 10, but this failed during verification.
View 10 Replies
Jan 25, 2016
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
View 9 Replies
Jun 17, 2015
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
View 1 Replies
Apr 14, 2016
Windows 10 currently installedUEFI (Legacy/BIOS is supported but I do not prefer using it as it may cause more problems in the future)1 Hard Disk Drive
Goals: Install Windows 7 on another partitionMaintain my current Windows 10 installationNOT have to switch to Legacy/BIOS mode
I found this: Windows 10 - Dual Boot with Windows 7 or Windows 8 But it assumes a Windows 7 installation and subsequently dual booting Windows 10 on it. What I would like is essentially the opposite.
View 7 Replies
Jan 30, 2016
I upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 Replies
Jul 29, 2015
I got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 Replies
Dec 12, 2015
I'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
View 1 Replies
Sep 17, 2015
There is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
View 1 Replies
Jan 31, 2016
how to be able to install both Linux and Windows 10 on my laptop's hard drive?So that when I restart my laptop I will be able to choose from either Windows 10 or Linux?
I did that once with Windows 7, and I remember I had 2 possibilities: Either to be able to choose through a Linux prompt at the startup, or through a Windows prompt. I tried both options. (It was either doing it via a Microsoft boot manager or via Linux boot manager or something like that, I just can't remember)
Edit: I remember there was some sort of Linux boot manager if you install Linux AFTER Windows, and if you then delete Linux completely, you had to repair Windows boot loader (Or it was the other way?i.e installing Windows AFTER Linux and then repairing Windows boot loader?)
View 9 Replies
Aug 24, 2015
So I've finally managed to install Windows 10 Pro x64 although with Windows 7 left over in dual boot. It created a "Windows.old" folder in the C: drive and Windows 7 doesn't boot anymore. How do I uninstall Windows 7 from my PC and will it affect any files?
View 7 Replies
Nov 17, 2015
I am dual booting Windows 10 and Windows 8.1. Each operating system is on a separate physical solid state drive. My default is Windows 10. The Windows 10 OS was installed on the drive that originally contained Windows 7 when I dual booted Windows 7 and Windows 8.1. I don't have drive partitions to deal with as each operating system is on a separate physical drive.
Now I would like to remove the dual boot by removing Windows 8.1, leaving just Windows 10. That will leave me with an unused SDD.
When I am in Windows 10, the default OS, the msconfig Boot section shows Windows 10 as the default, as it should. To remove the dual boot, can I just Delete Windows 8.1 from the Boot section of msconfig and make the setting permanent?
View 5 Replies
Jan 31, 2016
I have a feeling this is bios/uefi related
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
View 1 Replies
Jul 31, 2015
I did the upgrade on my Laptop from 8.1 to 10, went smoothly everything works so far. Now i have to decide do a reset and do a clean install since i always worry if later there will e a problem, should i safely think if no problems now that if i reformat a clean install that all drivers will be there and everything will be ok. Tomorrow i do my Alienware Aurora R4 desktop and prey it goes well. Then since i have 30 Hard Drives that i will be able to do a network share and be able to see it on my living room TV, will pray.
View 9 Replies
Sep 28, 2015
So I've been using Windows 10 for the past two weeks now. I really dig it, however the hard drive I'm on is slightly slower than my 7200rpm drive which could boot Windows 7 up a lot faster.
I upgraded my Windows 7 installation to this current Windows 10 install and since I want to
1. Sell this current hard drive
and
2. Move to the other hard drive,
I'm in a bit of a dilemma here. I have a large amount of software and important documents installed on this pc.
In the event where I want to clean install to the other hard drive, I don't really want to be tasked with having to reinstall all of this software again, mostly because I don't have installers available for them.
So I guess I want to know what are the benefits to clean installing over upgrading on an already fast hard drive and what would be most convenient in my case if this option is more viable?
I've read differing opinions online over upgrade vs clean install and I want to know what I should do.
View 9 Replies
Aug 11, 2015
I have reserved my copy of Win 10 (upgrade from Win7 Pro 32bit retail) , but i plan to fit a SSD and instill the 64bit version of Win 10.
does windows 10 need to be upgrade installed first so Win 10 recognizes my hardware or can i download the ISO and do a clean install
or will i need to install Win 7 64bit then do the updates and then apply for the upgrade?
View 5 Replies