I have done the update once, waited around 2/3 hours. i then reset my PC. i then did the update again, waited at least 5 hours. still stuck at 32% if there is a fix for this, i will do anything. i have a brother who did this update. My laptop is a pavilion 15 8gb ram radeon hd 7600g win 8.1
View 1 RepliesI upgraded from Windows 7 to Windows 10 at the first opportunity on July 30 after registering with Microsoft. The upgrade appeared to progress smoothly and I was able to boot the computer to see the new desktop screen. However, very soon after this first boot, the computer asked me to restart to finish the upgrade. This I did and my computer has since been rendered unusable. Every time I boot, the computer gets stuck on the welcome screen. It displays the generic circular user icon, with my name written underneath and the word "Welcome" written underneath this. The animated "computer working" icon (the little dots which rotate again and again) is displayed next to this. However, it never goes away. I left the computer for 12 hours and nothing changed (the little dots kept on rotating all the while). The computer otherwise appears fine (ie. the multimedia buttons at the top of the keyboard work fine) but the OS cannot get past this screen, no matter what I do.
I have unplugged all USB devices. I have tried booting with the power cable in and out. I have gone into the Advanced tab of the setup menu and disabled (and re-enabled) things like Bluetooth and Wi-Fi top test if this makes a difference. Nothing does. As things currently stand, I am completely unable to use my computer and all my files are stranded. Several of them are desperately needed.
I have tried pressing F8 to boot the computer in safe mode, but this doesn't seem to work (it results in a back lit but otherwise black screen).
Downloaded the iso and all seemed good , the compatible report said all was good . But now on the upgrade it has been stuck at 34 % for around 1 hr . I do have the circle with the little circles spinning ?
View 1 RepliesI have three computers in family that were given upgrades on the win7 family plan. One was just informed it was eligible for win10 upgrade. I think I made the mistake of custom install (for a clean install) instead of an upgrade and, related to other problems with windows update, I might have lost my activation on win7. Long story short, when I got to the point where win10 was installed and asking for a key I knew I had done a no no as, if I had done it correctly, I should not have been asked for a key. Of course I have no key but the win7 key and the install just sits there with no options but to input the key, which I don't have.
View 4 RepliesWhen I got the windows ten upgrade notification this morning the while thing went pretty fast, but now for the past 7 hours, it has been stuck on a black screen with nothing but a white box I. The top left corner saying - Personalized Settings- setting up personalized settings for : Web platform customizations.
View 12 RepliesI've trying to update an Advent netbook to windows 10 from 7. It's been a hassle all the way with hangs on 'checking for updates'. However, I got through that but now it's stuck on 'Get going fast' screen.
I had selected 'use express settings' and now it's stuck on that screen. The mouse still works but nothing happens. I left it on all night. It's still on the 'get going fast' screen.
If I reboot (even remove battery) I get the initial advent boot screen but no bios info. Del, f12, f11, f2 etc do nothing. The blue 'win 10' logo appears briefly then back to the 'get going fast' screen.
I also tried the usb flash drive that had the old os on it but it won't boot from it despite that being the initial boot setting in the bios. Has win 10 bricked my netbook?
Last night I finally decided to backup all of my files on my Windows 7 desktop machine and wanted to do a clean install of Windows 10 (I had been wanting to reformat for a while, this seemed like a good time to do it). I noticed after starting the free activation of Windows 10 (through Windows Update) that it would only update to Windows 10, so I let it proceed.Once 10 finished and booted up, everything was great. At this point, I went into settings and chose to Reset this PC, and made sure to select only to remove files - not fully clean the drive.
After being stuck at only 2% for 4 hours, I decided to give up on the reset completing. I turned off my desktop, and then downloaded the Windows program that creates the installation on a USB drive from my laptop. Once completed I inserted the USB drive into my desktop and installed Windows 10 as a clean install without any issues.After all of this, I cannot activate my Windows 10. Is my only option to use my old Windows 7 installation/key to do another clean install, then go through the Windows 10 update again?
I downloaded Update to Windows 10 (from windows 7) and everything appeared to go well. Got the "Welcome" screen and chose my "Settings" preferences. Then the screen started flashing and all it shows is a banner across the bottom that shows a blank Microsoft logo in bottom left, next to it a box that says "Search the Web and Windows", a small icon that looks like a printer( midway across the banner, and a small icon that looks like a Menu icon in the bottom right. Then under the cursor is the dreaded "spinning blue wheel" thing. This whole banner and the icons just keep flashing. Been doing this for hours now.
If I do an "Alt+Ctrl+Delete", it pulls up the usual options but when I ask for a "Restart" or "Shut Down" and follow it with a reboot, it just goes through the start up/welcome process and then stalls at exactly the same place.
How do I get my computer back? I can't get online or do anything at all with it. Can't go back to 7 or to history or anything. It's just stuck at this useless screen.
My windows 7 PC was hard to start and restart and I needed to try 10 times or more before it worked (then I didn't restart it for days).
I managed to upgrade it to Windows 10 hoping that it will cure the problem BUT still it is a problem to start.
I checked everything and used every tool possible on windows 7 and windows 10 but nothing worked. (ccleaner and others failed)
So now I have a windows 10 PC that doesn't want to start easily.
After upgrade to windows 10 I GUESS that all driver files have been changed ?what else could it be ?
I've decided to upgrade my Windows 7 Ultimate to Windows 10 with the free upgrade. Unfortunately, it has been stuck "Checking for Updates" for the last 30-45 minutes. Is this normal? I've updated two laptops, one Windows 7 Home and one Windows 8 and it didn't take nearly this long. I'm afraid I'm stuck in some kind of loop.
View 4 RepliesCurrent situation: MS SP2 that does not boot, and the ssd is not formattable because it seems locked (same lock as when you hibernate the pc)
I tried to upgrade from W8.1 to W10 with the upgrade tool in Win8 on a MS Surface Pro 2.
The computer hangs on 56% so I reboot. It tells me "the installation is failed, so go back to win 8". I accepted.
From there it showing infinitly "Restoring previous windows version".(It shown in dutch, so maybe it a bit different in English.
It is in this state for a month now and I tried everything listed below.
I tried creating a Win 10 disk, and do a fresh install from there. Result: Cant get the drive to boot
Tried creating a Win 8 disk. It boots, but it won't let me format my C-drive. It seems to be locked because it failed the recovery to the old Win8 install. I can remove all the partitions, but it gives an error when I try to install on a newly created partition. After a reboot, all partitions are back.
I tried booting to command prompt with windows 8 usb disk and remove the partitions with diskpart. It failes the format command. "attri disk" does not show read only
I tried an ubuntu live disk. It does not show my NTFS partitions
So the problem is: I can not access my data, but I accepted it is lost (and I copied some things via command prompt)I cannot get into windows. It wont let me install windowsI cannot format my harddrive. I can not remove the harddrive because I cant open the tablet without breaking it.
One of the things I thought is to make a USB with win10 running on it, but most of my flash drives are to slow and booting from a Sandisk extreme 32gb seems impossible.
System: i7 950 X58A-UD3R Rev 2.0 16gb Ram GTX760. Pretty sure it's a Samsung 250gb SSD.
So I upgraded W7 to W10 via iso. Install made it all the way.
On reboot it's now suck on the black background, windows logo and spinning dots.
I tried to upgrade my Windows 7 laptop to Windows 10 but after it restarted, it got stuck on the loading screen.
Windows 10 (x86 build 10130)
Followed the tutorial, extracted the iso. Ran set up. How long should I let it stay at 0%
View 3 RepliesI was updating with mediacreation tool, and it stuck at %93 black screen There is not cursor, says it is configuring settings %75 .....
View 3 RepliesI bought an asus tranformerbook t200(with windows 10 update) on 11 august and was very happy with it.
Occasionally, the laptop couldnt find any wifi networks but that was fixed quickly by just turning the computer on and off, until today.
Today at school(my second school day at university), i had no internet anymore. He didnt find any networks anymore at all. Turning the laptop on and off wouldnt so a thing. So i tried some things, like turning the broadcom device on and off via device manager. That also didnt work. A user in the internet on another topic suggested to delete the broadcom and then reboot, i did it and things only got worse. My laptop didnt recognize the broadcom wifi adapter anymore at all.
Then I tried to format windows(with saving documents addition) which unfortunately failed. After that, i tried to format it and added the option that everything would be cleaned, that failed also. c windows system32 logfiles srt srttrail.txt is apparently the error.
Now if i start the laptop, the asus logo will show but thereafter the screen just turns black. I tried system recovery and even startup repair but both fail.
Samsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
I have attempted to download windows 10 around 4/5 times, the download completes and states that my computer needs to restart upon which it claims it is configuring the windows 10 upgrade. I would assume from this point it would restart into the windows 10 configuration however each time I have tried it it restarts back into windows 8 as if nothing had happened.
My laptop then opens up windows update and says I am able to download windows 10. This is really frustrating as I can't even seem to get into the windows 10 setup.
As you can see I am attempting to download again but there is no trace at all of it attempting to install windows other than this failed update that you can see here.
I am using an HP Pavillion 15-n268a laptop.
When I downloaded Windows 8 Pro a few years ago my PC only had 1GB of RAM, so it installed the 32 Bit version. I have since added another GB of RAM. When Windows 10 is released, will I be able to download and install the 64 Bit version, or am I stuck with the 32 Bit version on this PC?
View 9 RepliesI've successfully updated to Windows 10 on my two Surfaces, but there is some kind of issue on my desktop PC. The upgrade process from Windows 8 fails at about 71% total (Installing features and drivers at 91%), and the error I get is:
C1900101-40017 Windows Update ran into a problem.
When I click on "Get help with this error" I'm directed to a page with some general troubleshooting with Windows Update. I've run Windows update repair tool and it fixed some issues, but the installation failed again.
I have now tried freeing up more disk space which I admit was a bit tight and I'm preparing to run the update again. Still, I'd prefer if there was a more detailed error message or a log file where I could see what exactly went wrong, but there are no indications where I might find one (either in the error message, the troubleshooter, or Google). As it is, I'm shooting blind here and this will now be my fifth upgrade attempt.
A few years ago i bought a windows 8.0 pro upgrade dvd with a windows 8 pro upgrade key.
Will this windows 8.0 pro upgrade key work when i do a clean install of windows 10 pro version 1511?Or will it only work with a full licence key?
Have been locked out after upgrading from W7 to W10. No Microsoft account.
View 9 RepliesHow can I upgrade to Windows 8 Enterprise to Windows 10 ?
Is there a way to go from Windows 8 enterprise to windows 8 to upgrade to windows 10?
Since I dont have windows 8 im not eligible to download Windows 8 for free.
I Heard there was a way for Windows 8 Enterprise users to use Windows 10 for free but had to use all the beta updates.
i have windows 8.1 and already reserved windows 10 , but windows update doesn't work always stuck at checking for updates i tried all fixes on the internet and it didn't work . so how do i get windows 10?
View 9 RepliesI've run the free Windows 10 upgrade twice on my Windows 8.1 laptop. Both times, Windows 10 would download. As my system restarted the install would take place and system finishes restarting. However, upon hitting the splash screen, I was back to Windows 8.1. Not sure why the install is failing. Each time, I receive a failure in the Windows Update popup. Did not have this problem on my desktop going from Windows 7 to 10.
View 2 RepliesI just upgraded my Windows 7 installation to Windows 10 using the Windows free upgrade. The upgrade completed successfully and I am able to boot into Windows 10.
I am not able to open any applications pinned to the taskbar. Even the windows menu is not launching! Hence I am stuck with only limited set of applications which have shortcuts on the desktop.