Installation :: Windows Cannot Be Installed To Disk
Jun 6, 2015
Trying to dual boot build 10130 iso on a fresh install of 8.1. Received a message:"Windows cannot be installed to this disk. The selected disk is not of the GPT partition style"
Laptop is an Asus x550c.
System recovery to Asus factory default.
Asus has a default 4 Partition setup. I added a 5th, Partition 6, by shrinking Partition 4
Looks something like this:
I keep getting an error when I install Windows 7. I want to install Windows 7 alongside Windows 10. windows cannot be installed to this disk the selected disk is of the gpt partition style
I read solutions to this and most of them write I must format my entire hard drive, but I can't do that because that would mean losing all my data.
I buy this laptop ROG GL552JX-DM019D together with Microsft Windows 10 Home English 64bit License OEM DVD . I tried to install the OS with Windows 10 from the DVD, but I could not, because after I typed the serial number of the DVD with OS , I received the following message:
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disk. Windows cannot be installed to this disk space. Windows must be installed to a partition formatted as NTFS.".
I have my system built but when i try to install windows 10 onto my kingston 120gb ssd its stops on 6% and it says in the bottom left that windows cant be installed to this disk the selected disk is of the GPT partition style i have never installed windows before...
i got the windows 10 upgrade from windows update, downloaded it and installed it. went to microsoft website downloaded windows 10 to put onto a usb drive. before performing a clean install i partitioned my drive and dropped around 230gb of stuff on it (967gb total drive, partitioned 280). when i tried to format the drive i encountered this issue
"windows cannot be installed to the disk. the selected disk has an mbr partition table. on efi systems, windows can only be installed to gpt disks.".
I don't know if the problem is my hdd or my usb drive or my bios. i tried deleting the partition and then pressing new but i continue to get the same error. i tried looking around but i cant make any sense of the posts with this error being solved. one of the posts says to change usb efi to gpt in bios but i dont think that option is in my bios (i can post a picture of bios if needed). another option is to clean the entire disk with cmd but i dont want to lose the other partition.
I know I need to disable secure boot in order to change the boot sequence. I ran into an issue trying to install Windows 10 on a GPT partition - it said it couldn't do it. So...after much searching, i learned (??) i need to use diskpart to clean the partitions to create one large unallotted space which would then allow me to install Windows. My question is, can i convert the disk to mbr and install Windows to it that way and run it in that mode. If i can do that, what would be the command to do that? > convert mbr after the clean command?? What about enabling secure boot?? Can i do that if i have installed Windows under MBR rather than GPT?
I have a laptop that came with Windows 8.1. The hard drive failed and has been replaced with a new hard drive. If I want to install Windows 10 on this laptop, do I first need to install Windows 8.1. and then perform the upgrade to Windows 10, or can I just install Windows 10? Will Windows 10 use the Windows 8.1 license key in the BIOS to activate? Or will this not work unless I first install Windows 8.1. and then upgrade to Windows 10?
This computer has never had Windows 10 on it.
The computer has a new unformatted hard disk that has never had Windows 8.1. installed.
I recently installed windows 10 on my HP stream 7 and after some driver updates everything works fine except for the store: it's just not there. Some apps came pre-installed and run normally, but some are shortcuts to downloads form the Windows Store and, when clicked, give me the pop-up message "You'll need a new app to open ms-windows-store."
is it possible to uninstall the first installed OS (Windows 8.1) in the SSD that has also win 10 installed into the second partition without losing data in win 10? If not from windows tools maybe using some software? Currently this is how my SSD is:
Disk0: [System Reserved:350Mt][D:233Gt][C:231Gt][Recovery:450Mt] D being windows 8.1
I have got part way through the installation process and I received this message ..
"Windows 10 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks."
This is a new install onto a new laptop with only FreeDos. How to get past this message.
I currently have windows 7 on my 1TB hard drive and have recently bought a new 256gb Crucial SSD (but not installed it in my desktop yet).
I bought the SSD to be able to install games onto it so they load quicker but also if possible to have my OS booting from it so my computer loads quicker from switching on.
Someone put me onto the idea of using a program called Steam Mover to be able to move games from my HDD to the SSD without having to uninstall them and then re-download them direct to the SSD. I understand this can also be used for other programs like photoshop etc too.
I want to upgrade to Windows 10 but don't want to have to do a clean install and lose all the programs that i currently have installed such as Photoshop, Office, iTunes etc. Is it possible to somehow upgrade my OS on my HDD but then actually boot from the SSD perhaps by using the Steam Mover program?
If not, do I just have to bite the bullet and accept that I will either lose or have to reinstall a number of programs to my HDD? I do have a second 1TB HDD which is empty at the moment in case its needed for cloning files?
I am trying to get the little Reserve Windows 10 icon to show up in the taskbar of the new laptop I purchased. After some hunting around, I saw that one of the updates which must be installed is KB2976978. However, it is not being listed on Windows Update, and is not in my list of installed updates either.
So I am currently on the Windows Insider Preview builds and have been having some issues with them and decided that they aren't for me. I was trying to do an upgrade installation to get back onto stock Windows 10 without losing anything but any time I get the installer running I am not allowed to select the option to keep all my stuff because "Windows may be installed in an unsupported directory." I have looked around and it talks about changing the default program files directory in the registry and to revert that back, but I never did that tweak in the first place.
I've lately been trying to upgrade to windows 10, which is available for free. Since I have been using windows 7 for more 2.5 year on my desktop computer, I thought that now was a good time to do a fresh reinstall of windows from 7 to 10.
So I did a backup of all my important data to an external HDD, so they're all safe. I then tried to make a true clean install following this guide: [URL] ....
I just installed a new SSD (disk 1) on my laptop and used Samsung's tool to clone my OS drive (C: on disk 2) onto it. This was done with no error, however I cannot boot from the new SSD in bios, as this hangs up the computer.
I assume this has to do with C: still being the boot and active partition, and the system partition (also active) being on Disk 0 (HDD).
I attached my disk management screenshot for reference.
How to make my new SSD (disk 1) the boot drive? For info, I do not have a windows OS CD but already created a windows 10 repair disk.
I've just bought a new SSD (Samsung EVO 850 250GB) for my Dell XPS 15 (L521x). After I inserted it into my laptop i intalled Windows 10 Home Pro. The installation process happened without any error, the laptop restarted several times (which is normal during the installation) and then booted to the desktop. again, no error whatsover. now, when i try to turn off or reboot my laptop, it is not able to power off automatically (i've waited for over an hour). so i have to power it off forcefully by pressing the power button for several seconds). if i want to reboot the laptop, it gets stuck at the dell logo, the little circle is spinning but nothing else is happening. i have updated all drivers, tried to boot into safe-mode, nothing worked
The current bios version is up to date (A16), SATA operation mode is AHCI, according to Samsung Magician (which i was able to install) everything is configured correctly.
Got a perfect upgrade from Win7 Pro to Win10 Pro for any programs that were on the boot disk. However any programs that were loaded on a second (non-bootable) disk were not recognized at all. Is there any way, other than reloading all those programs, to get Win10 Pro to know they are there? I thought this would be caught when the system upgraded but this did not happen. I was trying to keep my boot drive lean and mean.
I have a Acer Aspire XC-603G desktop upgraded to Windows 10 64bit Home (no Hyper-V). I want to run 16 bit software that is incompatible. I would like to dual boot with Vista x86 (gave away my XP). From what I understand, you must load the older version first due to Windows 10's MBR. Can I backup/clone Windows 10 partition, reformat and repartition the HDD, install Vista in first partition, then restore Windows 10 to the second partition? I'm thinking I'll need a fresh Windows 10 install. Or is there a simpler way? The only other way I see is to buy the Pro upgrade to get Hyper-V. And if I did the latter would it really be compatible with my Windows 95 16bit ImageReader Scanner software?
As I have multiple retail license keys, I am unsure which one is in use right now.
There are 3rd party key finders that may show the key in use, but I prefer to obtain the key using Windows own tools, if possible. For instance using a CMD.(Am uncertain about these 'key finders': can they be trusted?)
I have not installed any AV SW (that I know of) but my windows defender stopped working and says there is another AV running. How can I find out what is causing this and get defender back online? I have the windows home edition.
For a particular program(Microsoft office/Driver Booster) it says "Windows cannot find <program path>.Make sure you typed the name correctly, and then try again." even if it is installed properly.
I have Windows 7 Pro 64bit on a desktop and I have never requested the W10 upgrade. Two days ago when I went to Windows update I got a surprise. The screen below showed up!
My update options was changed to automatic from notify me and I can't install some real W7 updates waiting in the wings.
I worked with Microsoft Support for 2 hours yesterday evening and nothing has really changed. The Get Windows 10 app KB3035583 was uninstalled and so was KB2952664. How to get the Windows Update screen back to allowing other updates. I'd like to be able to put the waiting updates on and put W10 on sometime later this year. I don't understand why I am being forced to do the upgrade.
