Installation :: Won't Boot After First Run
Aug 30, 2015
After installing windows 10 x64 (Update and Clean) it runs for the first time. I download and install whatever updates are available, and do a restart, but windows wont boot, i get the windows logo, and the rings spining (Loading) and then black screen. Ive tried startup repair (From OS and USB), can't repair it, reset of pc, when done and the first run is about load, black screen. I was running win 8.1 before, with no problems.
Ive tried multiple times to do a clean install, and same thing, run first time, but after first reboot, black screen.
I taught it was something with my display driver, so at first run i tried download and install latest Nvidia driver for my card, and then reboot, but same thing, black screen. What can i do?
My specs:
Fujitsu Lifebook NH532 (Notebook)
Core i7 3630QM / 2.4 GHz, 8 GB RAM, 500 GB HDD, 17.3", 1920 x 1080 / Full HD, NVIDIA GeForce GT 640M LE / Intel HD Graphics 4000
View 2 Replies
Similar Messages:
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Apr 29, 2015
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
View 9 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Feb 10, 2016
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 Replies
Aug 25, 2015
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
View 2 Replies
Sep 3, 2015
Im having trouble with my Windows 10 clean install. Once it installs it says it is resetting to complete installation, after it resets it will not load to the windows screen. It just loads bios and hangs with a prompt flashing on a black screen. I then used DISKPART to clean the disks and tried a new install in MBR and again in GPT formats, still the same result. What am I doing wrong? Are the RAID drives causing the problem? The machine was running fine before. I had a free upgrade from 7 and did the process of upgrading to 10 first before the clean install to activate the product. That went fine. I ran the hardware diagnostics from the BIOS and it failed the boot test with error code BIOHD3. Warning: No active partitions.
The machine is a HP with a
HP: Cleveland-GL8 Motherboard
Intel H67 Chipset
Intel i7-2600
9GB DDR3-1333MHz SDRAM [3 DIMMs]
1TB RAID 0 (2 x 500GB SATA HDDs)
1GB DDR3 AMD Radeon HD 6570
View 1 Replies
Nov 19, 2015
I just upgrade to Win 10 PRO 1511 on my Lenovo laptop and burned a win 10 pro DVD. I would like to do a clean install but I'm not able to find my DVD drive on Bios or boot manager.
View 9 Replies
Nov 20, 2015
Currently, I am using Wiindows 7 Home Premium x86 with the drive in MBR partition style.
I tried to make a bootable USB of latest Windows 10 x86 ISO with Rufus in this configuration:
GPT partition Scheme for UEFI
FAT32
4096 bytes
Quick Format
Create extended label and icon files
When I try to boot from the flash drive, it just goes into a black screen, then returns to the boot menu.
I enabled both capabilities for UEFI and Legacy boot, UEFI is prioritized.
Do I have to reformat the drive first to GPT, or it's not supported?
View 7 Replies
Jan 3, 2016
I first tried to install Windows 10 to a new ssd in a system with a hard drive that already has windows 8.1 on it. After the install it booted to the flash drive that had the install on it again. I removed that and it failed to boot. I cannot select the ssd in the boot device menu so I choose the hard disk. Sometimes it gives a black screen with text, and other times it says windows needs to be repaired and lets me choose windows 8.1 or 10. I then tried to install windows 10 on the hard drive and now that won 't boot either. I've tried resetting the pc in windows recovery, and that doesn't work, nearly all of the features for repair your pc in the install media, but nothing. Now I'm going to put 8.1 back on the hard drive and try to upgrade from that and then clean install over the new install of windows 10 upgrade.
View 5 Replies
Jun 27, 2015
It asks for wifi details, privacy settings, says "Just a moment" then restarts. Then again, and again.
View 6 Replies
Aug 5, 2015
I upgraded my Windows 7 Home Basic to Windows 10 yesterday. It was successfully activated. I loved the UI and animation.But I could not sign into my Microsoft account, hence could not use Cortana or sign into store. I got "Something went wrong" error all the time. Multiple reboots did not solve the issue.I decided to reset my PC completely and proceeded without keeping anything though it warned me "This might take several hours". My PC got stuck at 99% for like 4-6 hours. I kept it at that stage the whole night.
When I woke up this morning and saw, my PC had a blue screen error saying "We will restart your PC INACCESSIBLE_BOOT_DEVICE". This error is existing after multiple reboots also.
The two options I can think off:
1. Rebuild my Windows 7 all over again and upgrade to Windows 10 (I am afraid it may not solve the problem).
2. Do a clean install of Windows 10.
I don't want to do the first. Is there anyway I can claim the same license that I already have for Windows 7 in second scenario? I don't mind losing the existing Windows 7 license if I get one for Windows 10.
View 8 Replies
Jul 31, 2015
I tried to update my Windows 8.1 installation on my Thinkpad T61p to Windows 10. It went smoothly until it finished copying the files (75% complete). It is now rebooting in an endless loop (reboot -> Windows logo with spinning circle -> black screen -> Windows logo with spinning circle -> 75% complete message -> reboot) and I don't know what is causing the problem. I have installed the latest BIOS and tried various changes to BIOS settings with no effect. Does the installer write any kind of diagnostic log that would tell me the reason for the reboot loop?
View 7 Replies
Aug 22, 2015
Trying to do a clean install booting from DVD or USB created w Media Creation Tool:
Windows 7 x86 and x64 boots from DVD or USB
Windows 10 x86, boots from DVD or USB.
Windows 10 x64, from DVD loads the blue window and then nothing more. Have to switch off/on to get out of it. From USB - nothing, just blank, some HD activity and then nothing, ctrl/Alt/Del restarts
View 9 Replies
Oct 14, 2015
Im doing a clean install on a new SSD I just bought. The Samsung 850 EVO. I have a USB flash drive that I use to try to install Win 10 and I cannot get it to work. I get to the install screen and when it says it need to reboot it won't reboot back into the Windows installer. All I get is this when it reboots. (See attached picture) I have tried after the restart to boot into the SSD and the flash drive. I get the same message as mentioned before if I reboot into the SSD, and if I reboot into the Flash drive it just restarts the whole installation process. I also can see in the installation program that the OS has taken space up on the SSD even though I cannot boot from it.
View 4 Replies
Oct 26, 2015
I'm on Windows 10 32bit and have made a bootable usb Windows 10 64bit using 'Windows 10 media creation tool.
My mother board (ms-7788) originally came with Windows 7 and its own bios. I now can't access the original bios and the uefi gives me no boot from option.
View 9 Replies
Dec 19, 2015
I have win10 64 installed on my SSD and win10 32 bit on a HD. The SSD is GPT partitioned and the HD MBR. I can boot from the Windows boot loader in the BIOS into 64 bit windows on the SSD and, by selecting the appropriate HD in the BIOS into the 32 bit windows in the HD. I cannot figure out how to get that boot menu (either gui of text based) that I have read about in the forums. Do I need to convert the HD to GPT as well. Do I need to change anything to get this to work?
View 9 Replies
Mar 4, 2016
I have Windows 10 and 8.1 dual booted but I’m having trouble removing 8.1. 10 is on a Seagate 2TB HDD, and 10 is on a Samsung 2TB HDD. Both are SATA and my motherboard is BIOS. As long as the Samsung (8.1) is drive 0 and is boot’s first choice, all is well. I get the option to select either OS, and either one can be made default.
In attempting to remove 8.1 I have tried several things like making the Seagate drive O, removing power from the Samsung, swapping boot choice, but always fail and I continually get, “an operating system wasn’t found” no matter the disk or boot sequence, except the one above.
Included are jpg’s of disk management while in Windows 10, both disk and volume views. How to decouple 8.1?
View 14 Replies
Jan 3, 2016
I attempted to set up a dual boot configuration using my existing Win 7 Pro on a Samsung SSD drive, and a clean install of Win 10 Pro on a fresh Kingston SSD drive. I created bootable Windows 10 installation USB, reset the UEFI Bios boot order and proceeded with the install. Win 10 installed, however it would not recognize the Win 7 Pro drive. I checked the UEFI Bios again, and the Samsung SSD was no longer shown in the "Fixed Boot Order Priorities". However, it was listed under "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings.
My motherboard is a MSI Z97 Gaming 5, with Click Bios 4 v1.9.
I must also mention, my Samsung SSD with Win 7 Pro was set up not with UEFI but Legacy boot. This was my first mobo with UEFI, so I made that mistake due to my ignorance.
I reformatted the Kingston Win 10 drive. Rebooted, but got error message that boot device not found. I rebooted and hit F11 to get back into Bios. A popup box gave me a listing of bootable devices and the Samsung SSD appeared. Selected it and it booted into Win 7 no problem. I went back into the Bios, but the Samsung SSD still not listed. I shut down the system, unplugged the Kingston SSD, rebooted, went back into Bios, and the Samsung returned.
I then shut down the system, connected the Kingston into a different SATA port, rebooted the system, went back to Bios, and the Kingston remains unlisted in the "Fixed Boot Order Priorities" as before, but shows up in "Hard Drive BBS Priorities", and under "Boot Override". It also shows up in Win 7 in the drives listings. Remember that the Kingston is just formatted, no op system installed on it.
I set up the Win 10 install on the Kingston SSD as a legacy drive too. Another question I will ask is can you have one operating system on a legacy drive and one on a UEFI drive in the same PC?
View 9 Replies
Apr 14, 2016
I have win 10 pro installed on a Samsung 850 pro SSD. In Bios it lists Windows Boot Manager as the #1 option. I selected Samsung ssd as my #1 option, saved and exited. Computer will not boot. Says No OS found-insert media and restart. Did that a couple times. No Boot. Set Bios back to Windows Boot Manager. Everything runs fine. Also Sata controller set to AHCI. Is this normal for Windows 10? In Device manager my storage controller says Microsoft storage space controller.
View 9 Replies
Aug 25, 2015
I have been trying to install the Windows 10 upgrade to no avail .
I am running windows 7 home premium x-64 on a Gateway NV78 laptop.
Things I have already tried range from deleting programs and device drivers to reinstalling the updater. Have run a clean boot and ran from the updater, the build. a startup disk, and from a usb flash drive. I have deleted my printer drivers, virus software, and cleaners.
View 2 Replies
Mar 3, 2016
I am currently attempting to install Windows 10 but I am having some troubles. I have just removed my existing hdd and replaced it with a Samsung 850 evo 250gb.
As expected, the laptop is now displaying a "Boot device not found" error. I have inserted a usb that I created with the Windows 10 tool however the laptop won't boot it.
I have gone into the bios and put the usb at the top of the boot order but it still won't work. Do I need to disable secure boot or go to legacy mode?
Finally, will windows install the system using in the newer GPT mode?
View 1 Replies
Feb 10, 2016
PC specs:
Gigabyte F2A88XM-D3H
AMD A8 APU
kingston v300 SSD 120gb
WD HDD 1tb
I recently built this system for a family member as a low budget media/gaming pc. This was originally setup with windows 10 on the 1tb main drive, so I know everything works. Now we decided to put an ssd in as a boot drive, and I cant seem to get it working.I wasn't able to clone the drive due to inconsistent sector sizes between the drives.
I've finally completed the install on the drive after many failed attempts but when I try to boot from it the message reads "reboot and select proper boot device or insert boot media in selected boot device".
View 9 Replies
