Installation :: Boot Directly To Desktop As Win 8.1 Does?
Jul 26, 2015
My wife is about the worst technophobic person you will ever find and I have our Win8.1 laptop set up so that it boots directly to the desktop. I will put a standard user profile for her but I would like to make Win 10 as easy for her to get used to as I can.
View 9 Replies
Similar Messages:
Nov 10, 2015
how to I boot directly to the start menu in windows 10?
View 1 Replies
Sep 8, 2015
I finally got around to building a computer and it was working fine until a few days ago I turned it on and something strange happened. Directly after the msi dragon bios prompt screen, when it should be booting Windows, the screen starts flashing white with two black squares on it. It only seems to happen after it has been off for some time, like over night, and after turning restarting it a few times it eventually works. For some reason invidia driver 355.82 does not like Windows 10 try darkbreeze's solution and install driver 355.60.Here is a parts list
i7 4790k
msi Z97-G45
msi gtx960 4gb
evga supernova 550 g2
G. skill Ripjaws 2x8 ddr3
Samsung 850 evo 250gb ssd
View 1 Replies
Feb 26, 2016
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
View 1 Replies
Sep 11, 2015
As I now have icons only on the start page and nothing on my desktop, how can I skip opening on desktop and open directly on the start page?
View 5 Replies
Jan 28, 2016
From first time untill 2 years ago I took photos with compact camera, report photo number and write (on a paper note) what I see. Go in office, download photo to my computer and report on a Word document with table (or excel). Lots of work hours gone away for nothing...
1 year ago I leveled UP... Buyed a new iPhone6 and used Google drive to share and modify my document. I finally can take photo and directly annotate what I see. At office I have only to do little change at files, no big work!
2 months after... I bought a Note4. Use Google drive to modify my document and add notes. Plus: Better with pen, bigger screen.
This is fully working right now Just a problem, Note4 or iPhone 6 screens are really tiny for my work, so...
So I think about SP4, a lot bigger screen , Try to do same things with my notebook (HP Core I5, SSD and Windows 10) with Office 2013/2016 and the integrated webcam. No way to do..
I can't take a photo and put DIRECTLY into the word document. I need to take photo and than import to my documents, that is a problems when I do my work. I can open Camera App and put in background, from Word can take a screenshot but I lose a lot of time and the details is not good. If I go inside Word16, insert pictures, I can see a shortcut to Windows 10 CameraRoll app. So I checked how to put here the Camera APP. NO WAY, again.
So check One Note. This can take a picture direct from camera, take notes. Checked on YouTube that I can write with the pen. Try to my notebook. I can't export OneNote file into Word DOC format.
View 9 Replies
Jan 12, 2016
How can I print labels directly to stock. Now it keeps insisting on a PDF file that does not print to label stock correctly.
View 11 Replies
May 24, 2015
I have a bluetooth mouse, as you can tell from the title of this thread. I also have a USB extender cable that I usually use, but I'm travelling (With a tower, I know) and didn't bring that because I assumed that the thing would work right in the back of my tower...
I was wrong, and this thing lags around the screen horribly when it is plugged into the computer directly.But I have the extender cable plugged into the same USB port at home and when I have the receiver plugged into that, I never have any problemsI assume this is a Windows 10 thing, as it didn't happen on my old Vista computer, could also be a driver thing
View 1 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Feb 3, 2016
Is there a command parameter to taskmgr.exe to open directly to Details?
View 6 Replies
Feb 17, 2016
I have in the past readily connected two computers directly via an Ethernet crossover cable under Win7 and Win XP but cannot get this to work under Windows 10. No specific messages, just cannot see the alternate device from either notebook. make this happen under Win 10 ?
View 2 Replies
Oct 14, 2015
I can not activate my windows 10,I have done all with the genuine file but it won't activate anyway,could it be that I not upgrade it to w 10?,I did a Clean install directly!
View 5 Replies
Apr 21, 2015
A desktop icon suddenly appeared on my desktop.. If I delete it, the whole desktop is also deleted... The desktop folder on the drive, does not contain that icon...
View 7 Replies
Apr 29, 2015
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
View 9 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Mar 17, 2016
I connected the printer to my computer and I'm able to print pages from a browser, my problem is I'm unable to access the printer directly to scan files. I've tried deleting and re installing that didn't work. The printer is an HP Deskjet 3050 ...
View 3 Replies
Feb 10, 2016
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 Replies
Feb 10, 2016
I just received my PC and Windows 10 will not open. After bios starts the screen says, Hi there Let's get a few basic things out of the way. Asks for home country, language, keyboard layout, and time zone, then click on NEXT. Then I have a screen that says, Get going fast, click on USE EXPRESS SETTINGS. The screen then says Just A Moment with small white balls going in a circle above. At this point the screen goes black except for the white mouse pointer. I have tried two different monitors using the VGA port, one TV using the HDMI port, all with the same results.
View 9 Replies
Aug 14, 2015
How do I boot my pc straight into the desktop without the username and picture shown.
View 1 Replies
Aug 7, 2015
Today when i booted up i noticed ive no desktop background, i can cycle through backgrounds and i can see borders changing color but my desktop stays black, ran sfc /scannow which it found/fixed errors but nothing to do with my issue, rebooted, ran ccleaner, still broken....
View 3 Replies
Aug 29, 2015
This problem is as old as Win itself, it was in every version of Win and now in 10 I have it too. Everything worked fine until a few days back everytime i boot or restart the PC all the icons go to the left side of the screen and I can't seem to figure out why. Yes, the automatic icon arranging is turned off, yes there is no malware in my PC, no I don't have dual monitors and no I do not want to install 3rd party software to solve this problem. I want to get to the root of it and solve it.
View 9 Replies
Jan 31, 2016
Everytime I boot up my Desktop and sign in, my desktop doesn't show. Only my mouse, the rest is black.
View 2 Replies
Aug 25, 2015
last few hours I spent trying to manually deploy Windows 10 on clean GPT disk but after applying image and rebooting I always end in unbootable state.
I manually setup drive like this:
Code:
select disk 0cleanconvert gptcreate partition primary size 350 #RE tools won't fit 300MB anymore :-)format quick fs ntfs label "Windows RE tools"assign letter tset id de94bba4-06d1-4d40-a16a-bfd50179d6acgpt attributes 0x8000000000000001create partition efi size 100format quick fs fat32 label Systemassign letter screate partition msr size 128create partition primary format quick fs ntfs label Windowsassign letter wlist volumeexit#no recovery image partition as per documentation it is no longer needed and followed by pretty common deployment:
Code:
dism /apply-image /imagefile:g:Sourcesinstall.wim /index:1 /applydir:w:dism /image:w: /set-Timezone:"Central Europe Standard Time"md T:RecoveryWindowsREattrib w:WindowsSystem32RecoveryWinre.wim -h -s -rcopy w:WindowsSystem32RecoveryWinre.wim T:RecoveryWindowsREwinre.wimbcdboot w:windows /s s: /f UEFIw:WindowsSystem32
eagentc /setreimage /path T:RecoveryWindowsRE /target w:Windows
After reboot I always end unbootable (as we talk Apple computer it means 1) no partition on Option or 2) folder with ? or 3) just gray screen, make your pick). There's a chance that Windows rely on some UEFI 2.0 feature, which is not available as the old guy has 1.2 only. Or maybe I missed some step somewhere.
View 2 Replies