Installation :: Can't Upgrade And It Displays Message
Aug 7, 2015I can't upgrade to windows 10 and it displays the message as in the attached image.
I have Windows 8.1
Similar Messages:
Installation :: Upgrade System Partition Message
Aug 1, 2015When I try to upgrade my Dell XPS 15 running Win 8.1 to Win 10 I get a message "we couldn't update the system reserved partition", I only have an EFI system partition, not the 100MB DATA partition I've read about.
I've attached my disk management layout.
Installation :: Upgrade Fails With Error Message Code Of 80070002
Aug 9, 2015Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesCannot Duplicate Displays After Upgrade
Sep 3, 2015I have a Dell XPS 15 L502X + IN2020M_Digital monitor connected via laptop’s HDMI port. Graphics is a NVIDIA GeForce GT 525M. I upgraded from Windows 7 to Windows 10 and I can no longer Duplicate the displays.However, PC Screen Only, Extend, and Second Screen Only will work.In Device Manager I have uninstalled both the IN2020M and the Generic PnP Monitor and restarted. They were added back but no change.I basically confirmed that the monitor is not the problem because I also can't Duplicate the displays when a projector is connected via HDMI.
View 1 RepliesInstallation :: Not Detecting Multiple Displays
Aug 17, 2015Windows 8.1 had detecting my 2 monitors attached to the laptop. After the upgrade to Windows 10, its not detecting those two monitors.
View 2 RepliesCPU Isn't Supported Message When Trying To Upgrade
Aug 15, 2015Got this message "CPU isn't supported" when they tried to upgrade to W10. We tried the Media Creation Tool and it came back with "You can't install Windows 10 because your processor doesn't support CompareExchange128". So where do i send her from here ??
Running W7
Upgrade Refuses To Download / Error Message When Comes To 30 To 40%
Oct 18, 2015I have a Surface Pro 2 and recently got the Windows 10 upgrade invite. However, the upgrade refuses to download. Every time it comes to 30-40%, there is some or the other error msg. I have tried the system support options. No change in situation...App
View 4 RepliesClicked Upgrade Not Install - Invalid Product Key Message If Reenter Setup
Mar 29, 2015New PC build on MSI Gaming 5 motherboard. Put in an OEM System Builder Windows 8.1 Pro disc and clicked upgrade, not install. Now the machine won't install Windows and if I re-enter setup, it tells me invalid product key. Any way to reverse this or how can I get the OS installed?
View 1 RepliesInstallation :: Another Failed Message
Aug 3, 2015In windows update i have on 3 occasions over 2 days where it says upgrade failed. got me puzzled. i have all the updates
View 5 RepliesInstallation :: Can't Continue Message Pop Up
Aug 4, 2015I downloaded the update and got lots of errors trying to install it. I converted the esd file to an ISO and tried to run it from a DVD but get a "Can't Continue" message
View 3 RepliesInstallation :: MediaCreationTool Gives Useless Message
Aug 20, 2015I am running Windows 7 64 Ultimate and I am trying to run the MediaCreationTool64 from Microsoft. When I run it, I get message shown below.
At least it's nice to see Windows 10 is carrying on the long-standing Windows tradition of supplying useful and actionable information in their error messages.
Installation :: Black Screen With Error Message
Jul 29, 2015Just installed Win10 on a Win7 machine. Started it up and walked away.
Came back 3hrs later and all that was on the screen was this message:
Cannot Display this Video Mode. Optimum Resolution 1280 x 1024 60Hz
I can restart the machine and the normal Dell start up stuff happens. The Win10 logo comes up and then the screen goes black with the above message. No cursor. No nothing.
I cant even get the monitor settings to function once the black screen appears.
I can get into the monitor settings during boot up but cant make any changes before the black screen comes up.
Installation :: Can't Create Recovery Drive Message
Oct 30, 2015When I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
Installation :: Can't Get Rid Of Message Regarding Fast Booting On Samsung Notebook
Aug 8, 2015Just upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?
View 3 RepliesInstallation :: Cannot Install - Getting A Failed Message Error 8007000D
Oct 2, 2015Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D
View 1 RepliesDisplays Turn Off After 5 Minutes Although Set To NEVER
Sep 22, 2015Windows 10 Home 64-bit Toshiba Satellite S855
I've modified my power settings to NEVER turn off displays and NEVER put the system to sleep/hibernate.
Nevertheless, after 5 minutes of inaction, displays go dark.
I haven't tested the sleep/hibernate part yet.
How To Optimize Graphic Displays
Oct 22, 2015Recently upgraded to Win10 pro 64bit. I have an ASUS HD7770-1GD5 video card running both a 26in HD wide monitor as well as a 17in square non HD monitor. Duplicating the screen content on both is what I need. Somehow I had this working great in Win 7, but I must have something set wrong, as the content on both monitors now is indeed the same, but the square screen displays in landscape mode which makes it difficult to see. The clarity of the wide screen monitor is much less than optimal as well. What are the correct settings for this type of setup? I have the widescreen connected via HDMI cable and the older square LCD monitor is connected from the DVI output to a VGA adapter for the monitor.
View 1 RepliesCustomization :: Use Different Taskbar Locations On Different Displays
Aug 7, 2015When I first upgraded, the taskbar on my first display was located on the left side of the display and the taskbar on my second display was located on the bottom. I liked this. But I wanted to see how I'd like having both on left hand side. I went into taskbar properties. `Taskbar location on screen` was set to `custom` and I changed it to `left`.
I decided I didn't like this and wanted to change it back. But `custom` no longer appeared in this drop down and I couldn't find any other option to change them separately. Is there any way to change it back? Perhaps a specific registry key?
Taskbar On Other Displays Doesn't Autohide
Sep 27, 2015Have this problem where your task bar on you other display dont auto hide it is quite annoying.
View 4 RepliesTaskbar Clock Only Displays On Right Monitor
Oct 17, 2015I have two displays or monitors, side by side.The taskbar clock only displays on the right monitor. I would like it to display on the left monitor, or both monitors.How can I change this?
View 2 RepliesMonitor Displays Artifacts After Waking Up
Nov 4, 2015I'm not sure where the fault may be for this, but here goes. I have a Dell E7250 laptop connected to a standard Dell e-port docking station. My monitor is a Dell U2515H connected via DisplayPort. Anytime I am away from my desk long enough, my laptop goes into sleep/power save. When I wake up the computer, the right side of my laptop shows heavy artifacts. If I unplug the DisplayPort cable from my docking station, then reconnect it, the issue goes away. I've swapped docks, cables, and even monitors, all identical, and I can't seem to narrow this down. I've also updated to the latest monitor driver for Windows 10 x64, and that didn't solve the issue.
View 1 RepliesShutdown Screen No Longer Displays
Nov 5, 2015After doing a repair via SFC /scannow I noticed that the shutdown screen no longer displays during shutdown. The Shutting down splash screen displays, then the monitor goes dark. The screen that shows the processes that are hanging with the option to force shutdown no longer displays.
Is there a registry or other setting that will fix this?
I also made some registry changes (after the above) suggested by a magazine but they don't seem to be working. For example, to enable jump lists in the start menu, it said to add a DWORD called EnableXamlJumpView with a value of 1. I did this but no Jump lists.
Networking :: Homegroup Displays More Machines Than Now Exist?
Nov 22, 2015I have a small network of computers and Homegroup is working a little to well. The network has had to have some changes, machines converting to W10 and changing names. The problem is there does not seem to be a way to refresh the Homegroup list of machines that have joined the Homegroup.
Or is there? do you know a way to display only the machines live on the LAN.?
Bluetooth Displays In Notification Area In Error
Dec 12, 2015Since the latest Win 10 update (12/12/15) the notification area shows bluetooth as highlighted. How do I turn that off? My laptop does not have bluetooth facility! There is nothing in the settings area to accomplish this.
View 5 RepliesFile Explorer Now Displays Double Spaced?
Dec 16, 2015I noticed a few days ago that all my file explorer views are double spaced. Coincidence? My 1511 update installed the day before this display problem,
View 4 RepliesCalendar On Start No Longer Displays The Current Date?
Nov 7, 2015Now the calendar just displays Microsoft's ugly icon in the calendar square. Used to be it would just have a number there. Like today it would have a 6 for Nov 6. I don't know how to do anything with the Start screen except Pin to it, remove items from it, rearrange items. I opened the calendar and looked at settings and saw nothing.
View 2 Replies