I have never had a problem installing updates to Win 8.1 and all important updates are fully installed. Every time I try to update to Win10 it says "downloading Windows 10 - checking requirements" and then I get the above error message.
View 9 RepliesI received notification that my Windows 10 reservation is now ready. After downloading and preparing to install through Windows Update, I receive a failure notice with error code 80070005.
I am currently on Windows 8.1 Pro x64. I have administrative privileges.
For several months, I've had an ongoing issue when I run 'sfc /scannow', corrupt files are found, some of which it cannot be repaired. From the CBS.log file, I found these related to "utc.app.json". I was assured that when Microsoft sent out update for DiagTracking (KB3022345), it causes a false positive for file corruption.
Also worth noting is that I currently have my boot SSD partitioned and configured to dual boot Windows 8.1 Pro and Linux. This all works fine, and I've been told this shouldn't be a problem for upgrading to Windows 10.
I would like to do an in-place upgrade to Windows 10, not a clean install, so that I keep all of my software and settings as they are.
On my latest attempt to install Win 10, after adding the Registry change, I now crap out with Error Code : 80070005.
View 14 RepliesThe update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
I have a Vaio laptop and migrated my factory Windows 7 install to an SSD about a year ago, which apparently left me with no system reserved partition. I used these instructions to create a new system reserved partition, but I'm still getting the same 'Couldn't Update the System Reserved Partition' error when trying to start the Windows 10 upgrade. What else I can do to get the upgrade to work? I really don't want to do a fresh install of Win 7 (assuming that would even work). My diskmgmt screenshot is below.Also found this thread on reddit , but not sure if that really applies to my situation.
View 4 RepliesI am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this means, as I have repeatedly formatted and erased the partition to no avail. I do have another partition with Windows 8.1 installed, so I am trying to salvage that and get the Windows 10 installed onto the other one.
For some strange reason. On boot, It asks me to pick either Windows 8.1 or Windows 8, and Windows 8 isn't installed...
This laptop is a mess. I bought it used, and it has only given me issues. Luckily I have my Desktop so it's not like I rely on this laptop.
This morning I started the windows creation Tool to download Windows 10 ISO to do a clean install. About 10 minutes into the download the machine lost power. I rebooted into the machine and tried to run the Tool again, but all I get is "Setup couldn't start properly. Please reboot your PC and try running Windows Setup again". So, I rebooted and all I get in the same message. What can I do to fix this?
View 1 RepliesI've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
I tried to upgrade to Windows 10 from pro 7. When going online I get this message....
explorer. exe - Application Error
The instruction at 0x60B52556 referenced memory at 0x60B52556. The memory could not be written. Click ok to terminate the program.
If I close with the "x" I can continue. But when I close Firefox I get a black screen and have to restart. Anytime I use a program it does this. What to do.
I get the error "Code 80200013" when I try to upgrade my windows 8.1 to windows 10 from my reserved upgrade through Windows Update.
Additionally when I try to create a usb installation media through the tool (this one here [URL] ....) I get the message "something happened".
I'm updating from 10041 to 10061 and every time get the "oops something went wrong..." message with no error code around 30~40% into installation. Any remedy or am I not the only one?
View 6 RepliesBasically I got this error message while upgrading to Win 10 from Windows 8.1 using the media creation tool.
What happened was, I did this first and i got to windows 10 no problem. Everything was fine until my internet died on the PC. Troubleshooting said there was a problem between the router and the connection. Long story short I could not get the internet up and running on my desktop only, everything else was fine and my other devices had no problem connecting to the Internet. The Internet worked about 4 hours into using Windows 10 then died on the PC only.
So I went back to Win 8.1. Everything seemed to go ok, everything worked. I tried to update to Windows 10 again Abd got this during the install...
When I try to upgrade Windows 8.1 with Bing tablet to Windows 10 in Windows update i get Error Code 8007003 in preparing to install phase.
When choosing try again it re downloads everything and same error appears.
I tried cleaning Windows Update files and running troubleshooter but it doesn't work.
If I try to upgrade from windows 10 home ISO will my activation be fine.
How do I resolve error code 1335 ? App downloads and MS updates will not down load. "cabinet file package error" PCW_CAB_RDR
My OS is Win 10 original install, not upgrade, from HP. CPU tower not laptop. Continuing problem.
Trying to upgrade my wife's PC via windows update. so far failed about 10 times with different errors. Latest it downloaded everything, completed the install, rebooted shows the x% complete screen, rebooted, briefly showed the Win10 icon and the small circle of white dots, rebooted and back at win7
Error log just says
Installation Failure: Windows failed to install the following update with error 0xe06d7363: Upgrade to Windows 10 Pro, version 1511, 10586.
System -Provider [ Name]Microsoft-Windows-WindowsUpdateClient [ Guid]{945A8954-C147-4ACD-923F-40C45405A658} EventID20 Version0 Level2 Task1 Opcode13 Keywords0x8000000000000028 -TimeCreated [ SystemTime]2015-12-10T19:11:07.145622700Z EventRecordID601760 Correlation -Execution [ ProcessID]308 [ ThreadID]5688 ChannelSystem ComputerAlisonXPS -Security [ UserID]S-1-5-18
-EventData errorCode0xe06d7363 updateTitleUpgrade to Windows 10 Pro, version 1511, 10586 updateGuid{2AF34381-A9A9-42D5-8A36-1B86F0A6235F} updateRevisionNumber202
Anti virus is just Windows Security.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
View 4 RepliesA friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
View 1 RepliesI have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 RepliesI have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
couldn't update the system reserved partition error....every time before downloading win10 while checking system requierments, i am on a windows 7 pc .... Also when it comes to free space i think 33 gigs are enough
View 1 RepliesSystem stats...Athlon 860K, Asus A55BM-E, GeForce 550Ti, 8GB Ram
Win 8.1 was installed from retail DVD onto a virgin 500GB mechanical HDD. I upgraded shortly after to a Samsung 840 EVO 120GB SSD and cloned the mechanical drive over, tested, and then formatted the mechanical drive for data. I got some real strange (to me) drive partitions - 100MB 'Data' drive which is almost full (cannot access) and a 350MB 'System Reserve' drive. The mechanical drive is a separate letter and all seems to work swimmingly. I sort of assumed this was normal.
Upon installing WinX I get the above error...from what i've read, people are having challenges moving from Win7 due to the fact that this reserve drive is only 100MB and it needs to be 300-450...well, mine's 350mb so not sure what gives.
I am trying to install windows 10 via USB on my HP Pavilion G6 Laptop, I deleted the hard disk partition to create new partition, but now when I select that partition, it says that Windows can't be installed on this drive as it is GPT partition. I enabled Legacy boot, still it gives me same message. I tried to create a new partition, it says that it will check to ensure that windows feature works properly and upon clicking OK, it gave this message after a minute : We couldn't create a new partition. Error 0xbdba5840
View 1 RepliesThis is the 2nd system (my wife's computer) we want to run Windows 10. Currently that system is running windows 7 Pro. The first system system went without a single hitch and it was running windows 7 Pro as well.. The download was complete so I was ready for the upgrade. I started the installation and the first thing I got the comment "We couldn't update The System Reserve Partition". I cannot find any documentation on this message.
View 3 RepliesI have googled this issue a lot and I see a lot of things that can be done but I some are not working. My partitions look different so its a little strange. When I try to upgrade to 10, I get the error message "We couldn't update the system partition". I had an older SSD that like 120GB. I filled it up so I put in a bigger one. My computer says it's 465GB. and almost half full. I ended up using Samsung disk magic or something like that which copied everything from the old SSD and put it on the new one. I think when it did this, it created some different partition.
I added an image of my partitions. Both C and D are SSD's. C being my operating system.
I am confused as to which partition windows 10 is trying to install itself on and what exactly is on the data partition. If I right click on the data partition, the only option I have is to shrink the volume.
I'm using win 7 at the moment and I want to upgrade for DX12 but anytime I try to it just says "We couldnt't update the system reserved partition" My reserved partition is 100mb and I know you need something like 350mb or something like that but I cant figure out how to get there. I'd rather not to a clean install if that's at all possible.
View 3 RepliesDoes not meet system requirements
Get Important updates: cleared.
Gets windows 10 ready but then it
Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition
Dialog crashes.
Does not allow one to choose which partition
Gateway Nv59
64 bit Intel 430m Duo core
Windows 7 Premium
500GB hdd
8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..