Installation :: Couldn't Update The System Reserved Partition
Sep 20, 2015
I have googled this issue a lot and I see a lot of things that can be done but I some are not working. My partitions look different so its a little strange. When I try to upgrade to 10, I get the error message "We couldn't update the system partition". I had an older SSD that like 120GB. I filled it up so I put in a bigger one. My computer says it's 465GB. and almost half full. I ended up using Samsung disk magic or something like that which copied everything from the old SSD and put it on the new one. I think when it did this, it created some different partition.
I added an image of my partitions. Both C and D are SSD's. C being my operating system.
I am confused as to which partition windows 10 is trying to install itself on and what exactly is on the data partition. If I right click on the data partition, the only option I have is to shrink the volume.
I'm using win 7 at the moment and I want to upgrade for DX12 but anytime I try to it just says "We couldnt't update the system reserved partition" My reserved partition is 100mb and I know you need something like 350mb or something like that but I cant figure out how to get there. I'd rather not to a clean install if that's at all possible.
I have a Vaio laptop and migrated my factory Windows 7 install to an SSD about a year ago, which apparently left me with no system reserved partition. I used these instructions to create a new system reserved partition, but I'm still getting the same 'Couldn't Update the System Reserved Partition' error when trying to start the Windows 10 upgrade. What else I can do to get the upgrade to work? I really don't want to do a fresh install of Win 7 (assuming that would even work). My diskmgmt screenshot is below.Also found this thread on reddit , but not sure if that really applies to my situation.
The update automatically tries to install but I keep getting this. It says Windows 10 couldn't be installed. We couldn't update the system reserved partition. Several times I got error code: 8000FFFF.
I'm trying to update a Dell Optiplex 780 with Windows 7 Pro. SP1
I really wanted to upgrade to windows 10 but I get an error saying that my system reserve partition could not be updated. Ive looked on tens and hundreds of threads and forums and they say to increase the partition size from 100 to 350. Except i dont have a system reserve at 100mb. This is my disk management. URL...
couldn't update the system reserved partition error....every time before downloading win10 while checking system requierments, i am on a windows 7 pc .... Also when it comes to free space i think 33 gigs are enough
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was migrated from the Asus Pc to Samsung SSD. Windows 7 boots and runs great off the Samsung SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". A friend used Aomei to create a System Reserved partition but Win10 still gives the same message about the system reserved partition.
This is the 2nd system (my wife's computer) we want to run Windows 10. Currently that system is running windows 7 Pro. The first system system went without a single hitch and it was running windows 7 Pro as well.. The download was complete so I was ready for the upgrade. I started the installation and the first thing I got the comment "We couldn't update The System Reserve Partition". I cannot find any documentation on this message.
Get Important updates: cleared. Gets windows 10 ready but then it Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition Dialog crashes. Does not allow one to choose which partition
Gateway Nv59 64 bit Intel 430m Duo core Windows 7 Premium 500GB hdd 8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
System stats...Athlon 860K, Asus A55BM-E, GeForce 550Ti, 8GB Ram
Win 8.1 was installed from retail DVD onto a virgin 500GB mechanical HDD. I upgraded shortly after to a Samsung 840 EVO 120GB SSD and cloned the mechanical drive over, tested, and then formatted the mechanical drive for data. I got some real strange (to me) drive partitions - 100MB 'Data' drive which is almost full (cannot access) and a 350MB 'System Reserve' drive. The mechanical drive is a separate letter and all seems to work swimmingly. I sort of assumed this was normal.
Upon installing WinX I get the above error...from what i've read, people are having challenges moving from Win7 due to the fact that this reserve drive is only 100MB and it needs to be 300-450...well, mine's 350mb so not sure what gives.
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was cloned from the Asus Pc to Samsung SSD. Windows 7 runs great off the SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". I would like to upgrade to Win10 on this pc.
I have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition.
I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues were resolved by expanding the SRP from 100mb to 450mb.
Will WIN 10 install if I have no SRP? Will it merely alter the boot files on my C drive?
I am having Dual Boot PC XP and Windows 10 on different hard disk. Windows 10 have been upgraded from Windows 7 but the System Reserved Partition on Windows 10 remained 100 MB ( 30 MB is free space ), wherein if we clean install the Windows 10 then System Reserved Partition is 350 MB. Now the problem, if I create a backup then the minimum 50 MB free space is required in System Reserved Partition otherwise backup fails. I tried command fsutil usn deletejournal which was advised by someone but it increase the free size from 20 MB to 30 MB only. I am hesitant to use partition manager software because once I have used this on another PC on a simple partition and though it has increased the size of the partition but data of my other partition was deleted.
I am trying to make space on an empty partition as a temp backup before I install a fresh copy of 8.1 to upgrade to 10.
I'm using Mini Tools Partition Wizard 9 Free Edition. What I have looking at the partitions are, a C partition (700 gigs capacity), then a System Reserved partition (350 mb's) then a F drive with 100 gigs of unallocated space. Here is an illustration.
I want to shrink my C drive by 100 gigs and then resize my 100 gig F partition so I will have 200 gigs of usable space for the backup - But I can't because somehow my System Reserved Partition is on the right side of the C partition between the C and the F. Normally this system reserved partition is on the left of the C partition.
I do not know how this partition got moved. I did have another partition set up after the C drive that I used to install the Win 10 preview on but I since have deleted that partition and edited the boot menu to reflect this in MsConfig. Perhaps Win 10 moved my System Reserved partition over?
I currently have one drive that contains a System Reserved partition (which includes the boot files). The status is System, Active, Primary Partition.I have another drive with the C: partition. The status is Boot, Page File, Active, Crash Dump, Primary Partition.I've been told that if I remove the disk (it's a bit flaky) with the System Reserved partition, I won't be able to boot up. If this is true, is it possible to transfer that partition to another drive? If so, does it have to be at the start of the drive? Alternatively, can I make the C: partition include System status?
I know about increasing the partition size but i dont know where it is on my pre-built pc. I do have a 128mb partition but i cant increase the size on my third party manager
I'm trying to update from 8.1 64-bit to 10 on my i7 24GB Toshiba laptop. I keep getting the message "Windows 10 couldn't be installed. We couldn't update the system reserved partition."
The very first try "failed" with an error Code C1900200. After that, every installation attempt shows "canceled" w/ an error Code 8024000B.
Note: "DISK 1" is my primary (boot) disk; "DISK 0" is my data disk. Both disks are 256Gb SSD drives. Other info is in my System Specs.
I do not see a "reserved partition" on Disk 1; could this be the problem? I'd rather not do a clean install, in order to keep existing programs/settings etc., but will do so if necessary.
The problem is when i installed my OS the reserved partition of OS automatically get created in different drive. I want to remove that drive(Drive 0) from my pc but without reserved partition im unable to boot my OS.
i want to remove the 750HDD(Disk 0) drive and want a make a reserved partition on my Disk 2. So i can boot my OS without Disk 0.
Every time I try to update and install windows 10 I get this error. It seems as if my reserve partition is too small to download windows 10. How would I go about fixing this issue. I have had a dual boot of linux in the past but got rid of it months ago.
I'm getting the Reserved Partition error when I try to install Win 10 on my Wn 7 rig.
My SSD is an EVO 500 partitions are Data 100MB C: 419GB Unallocated 46.58GB - this is my Over Provision Partition.
I guess I need need to increase my Data Partition to about 350MB. I want to use Minni Partition Wizard. Should I Reduce the Front End of my C partition? And use that space to grow the Data Partition?
I upgraded my custom built desktop from Windows 8.1 Pro With Media Center (Originally Windows 7 Pro Retail), and I've noticed I now have an OEM (Reserved) partition on my drive. I'm just about to do a clean install, and would like to know if it's safe to delete or whether I have to leave it there?
I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this means, as I have repeatedly formatted and erased the partition to no avail. I do have another partition with Windows 8.1 installed, so I am trying to salvage that and get the Windows 10 installed onto the other one.
For some strange reason. On boot, It asks me to pick either Windows 8.1 or Windows 8, and Windows 8 isn't installed...
This laptop is a mess. I bought it used, and it has only given me issues. Luckily I have my Desktop so it's not like I rely on this laptop.
