Installation :: Delete Partition Drive After Install
Jul 29, 2015
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
View 1 Replies
Similar Messages:
Aug 12, 2015
I've already upgraded to Windows 10 on my desktop PC, and there were no issues with the upgrade. However, I work from home and my work has informed me that they won't accept Windows 10, they will only accept 7 or 8.1 as their operating system (they also only accept Internet Explorer for browsing, etc.). So I can either downgrade, which I really don't want to do, buy a second PC, which I can't afford to do, or (I'm hoping) create a new partition and run Windows 7 from that.
So my question is, is it possible to create a new partition for Windows 7 while running Windows 10 on my main partition? Will I have to downgrade and install Windows 10 later? Or can I do it from Windows 10 already?
View 2 Replies
Feb 23, 2016
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
View 3 Replies
Dec 30, 2015
I made a 100gb partition because I was going to try and install Windows 7 and have it as a 2nd OS along side Windows 10, but about half way through the computer restarted and I can't boot into Windows Setup. That's fine, I changed the default OS and made Windows 10 be chosen instantly on startup. Although in disk management the (Windows 10) Windows C: partition says Boot, I'm not really sure whether or not it's safe to delete the Windows 7 partition.
View 1 Replies
Nov 13, 2015
Last night I wiped out my ASUS T100 tablet to clean install TH2. But there is a 7GB Recovery partition from Windows 8.1 that I can't get rid off using Diskpart.
View 9 Replies
Dec 8, 2015
Because of a problem with 10 a tech told me to revert to 10270. I backed up everything important to my D: drive first. I did a complete formatting of C:. Then upon installing 10270 onto C: I first blew away the partitions on D:, realizing what I had done just after hitting the keys.
I have run Easeus's free Partition Recovery software but it finds absolutely nothing, even in deep scan.
Is there another reliable method with which to attack the problem of restoring the partition tables for D:?
View 2 Replies
Aug 1, 2015
I upgraded my custom built desktop from Windows 8.1 Pro With Media Center (Originally Windows 7 Pro Retail), and I've noticed I now have an OEM (Reserved) partition on my drive. I'm just about to do a clean install, and would like to know if it's safe to delete or whether I have to leave it there?
View 1 Replies
Dec 12, 2015
I did a clean install on a new SSD that I had previously formatted and neglected to delete the partition ending up without a MSR partition. I've already installed lots of applications so starting over would not be something that I'd want to do. What are possible problems that I could be looking at going forward?
View 6 Replies
Jun 29, 2015
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
View 1 Replies
Dec 6, 2015
I am building a new computer next weekend and have three drives and need partitioning strategy for 3 drives:
- Drive 1: New 256GB SSD m.2 pci-e SSD for Win10 and apps (autocad, sketchup, Adobe CC, rendering apps)
- Drive 2: Old 2010 Vertex SSD which is 90-120gb (can't recall) for scratch disk/win page file for Adobe and apps
- Drive 3: New HGST 7200rpm 4TB 3.5" HDD for files, pics, video and possible system image ( necessary on Win10?)
1) I plan to format all 3 drives as NTFS unless there is strong suggestion to do otherwise?
2) what is best partition strategy for Drive 1? How much GBs for partitions for Win vs Apps? Is 60GB adequate for win10 partition leaving just under 200 GB for apps?
3) I read on win website to create 3 partitions for sys in this order: utilities; sys; win recovery. Does default win setup do this automatically or must I specify how many partitions and in what order and in what size? I'm clueless on this.
4) Disk 2: how much risk am I taking by using 5 yr old SSD for scratch disk? The virtual memory is volatile anyway so am I just risking each current session? I plan to point page file, cache, scratch to this drive. If too risky, I presume that using boot SSD as scratch is better than using HDD #3?
5) Disk 3: does win10 still require that user do image of opsys for recovery (using acronis et al) and, if so, how many GBs do I partition on Disk 3 and if so does it matter if it is the first or last partition on this drive 3?
6) what win 10 should I get? At Fry's they have OEM and also USB flash drive?
View 9 Replies
May 12, 2015
Since I had trouble with the upgrade with Windows 10 running very slow i'd like to try a clean install, but i'm weary because I am afraid it will wipe my 8.1 main partition and not roll back. I'm using this as a guide, but need to make sure i'm doing this properly. How to install Windows 10 - clean install, dual boot or VM | Expert Reviews
View 5 Replies
Dec 10, 2015
I currently have one drive that contains a System Reserved partition (which includes the boot files). The status is System, Active, Primary Partition.I have another drive with the C: partition. The status is Boot, Page File, Active, Crash Dump, Primary Partition.I've been told that if I remove the disk (it's a bit flaky) with the System Reserved partition, I won't be able to boot up. If this is true, is it possible to transfer that partition to another drive? If so, does it have to be at the start of the drive? Alternatively, can I make the C: partition include System status?
View 7 Replies
Oct 6, 2015
As IE11 was malfunctioning, and my GT610 driver doesn't seem to work properly in Win10 32 bit, I attempted to upgrade to Win 10 x64 on my machine (Dual core, 64 bit ready, 4GB ram), and whilst doing so I think I've deleted the C: boot partition. I had partitioned the C drive and put the data in F: drive partition before hand so I didn't lose all my data.
When rebooting, I got the message "bootmgr is missing", so tried to boot from a Win 10 32bit iso DVD. I can get the DVD to launch, and tried to go through a repair, but got the message that the drive/partition was locked. I can't repair it, or boot. I also tried fixing it using Minitool Partition Wizard, which shows the partition without a label and as "unformatted". wasn't sure whether I should format the partition or not.
what I can do, to unlock the drive (from command prompt?) and then reinstall or repair Win 10.
Can I keep the F: partition with the data on it whilst doing an install of the x64 bit windows, or will I have to reformat the whole disk because of the different architecture?
View 9 Replies
Nov 18, 2015
Does not meet system requirements
Get Important updates: cleared.
Gets windows 10 ready but then it
Checks requirements:
Windows does not prompt any choices,
We couldn't update the system partition
Dialog crashes.
Does not allow one to choose which partition
Gateway Nv59
64 bit Intel 430m Duo core
Windows 7 Premium
500GB hdd
8GB Gskill ram 1333mhz
Take note here that I cannot merge any of the disks, they all result in error or System lock. I can't make the 35MB system disk larger, but Easeus, Windows disk formatter and some other major ones I've tried just say No. But the problem is windows 10 doesn't give me the choice to overwrite the C or H which is quite large enough.
Take note that i just used the SAME flash drive to boot/install windows 10 to a friends lower spec Intel i3 laptop with 1/2 as much ram from Win 7 BASIC. Don't tell me It's not powerful enough..
View 9 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Jul 30, 2015
I originally made a USB key which booted fine, but could not install on any partition on two different PCs and 4 different drives. It gave the error message "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files." Tried different hard drives/partitions even a completely blank drive.
Did the usual wipe all partitions (on the two drives that are blank). I re-ran the MediaCreationToolx64 to make an ISO and now it is installing correctly. Is there a US English location I can download somebody's image of their USB drive or just try the 2 hour download again?
AND is their an explantion other than something went wrong creating the USBKEY? It is a brand new key (it is 3.0 but the ports are 2.0).
View 3 Replies
Sep 30, 2015
I read that a clean install rebuilds partitions and makes a recovery partition.
My question is does it allow you to pick the size of the partition that Windows 10 is installed to ?
I have a 1 terabyte drive but like to install in a 100gig partition.
I think I will delete the existing partitions before I start
View 2 Replies
Aug 6, 2015
I get the error message: "Windows 10 couldn't be installed - We couldn't update the system reserved partition".
View 9 Replies
Jan 10, 2016
There seems to be far too many recovery partitions and then some. This PC came with windows 8.1 but I upgraded to windows 10 a few months ago.
I also wondering if the proper recovery would take me back to 8.1 again or would it do a fresh install of 10. I hope it is 10.
View 9 Replies
Nov 24, 2015
After the update to version 1511 build 10586 Windows has created a 450 Mb recovery partition on my SSD drive.
I have already deleted the created Windows_OLD folder as well as the hidden folder with update files.
Can I seamlessly and without risk also delete the recovery partition?
View 9 Replies
Dec 3, 2015
I have a disk (HP machine) which has a recovery partition on it. When I go into Admin tools/Virtual disk manager, I can see the drive there (a partition on the real disk) but I can't delete it.
View 6 Replies
Aug 15, 2015
I have a HP Pavilion 23 all in one PC (23-f221ea) and the 1TB hard disk is getting rather full.. I want to change for say a 4TB drive, I know that I can't clone my 1TB drive to the 4TB drive using something like Acronis as max is 2TB and the new 4TB drive will have to be GPT formatted. I have already updated my PC to W10 with the ISO disk I made from MS update.. Can I install the larger disk GPT formatted and install with the ISO disk I made??? Or will I have to start all again and install with Win8/8.1 first..??
View 9 Replies
Dec 12, 2015
So i have the latest windows 10 version, but i cannot seem to install apps to any where except the C drive. And the option to change is disabled. See image attached.
Why is it disabled? How do I get it to work ?
I am on windows 10 pro if that matters.
View 9 Replies
Sep 5, 2015
A few days ago I got a new Win8.1 laptop that I smoothly upgraded to Win10. This laptop now shows as being registered with Microsoft. I just now purchased a 250GB SSD that will arrive in a week or so. I want to install Win10 on this new drive. A friend just gave me a DVD burned with the Win10 ISO. When I get my new drive I'll install it into the laptop. Then I'll boot from the DVD and (hopefully) do a *clean* install of Win10. And (hopefully) Microsoft will recognize the laptop as already officially registered. Will this plan work? Am I missing anything important? Do I need to get all the drivers first? Or will the upgrade process grab all the needed drivers? My friend said when he did this process it got all the needed drivers. I already did a backup System Image of Win10 to an external hard drive, and I made a System Recovery DVD. There's no personal files or documents on the existing Win10 drive.
View 9 Replies
Mar 5, 2016
Can I install Windows 10 using an external DVD Drive on a new PC build?
View 3 Replies
Aug 22, 2015
I have an old PC I use for testing things. I want to install Win10 on it before installing it anywhere else. But this PC has an 80GB SSD C drive. Currently it has only 12GB free. I can free up maybe 6 or 7 more GB by removing a bunch of USER temp data (if I'm brave enough), but that is still way below the Win10 system requirements. I have 2 additional internal drives, 512GB each. (Seemed like a lot 5 years ago.) The D drive has over 400GB free. Is the Win10 installation smart enough to use space on the D drive, or am I going to have to replace my small SSD with something bigger?
View 5 Replies
