My wife is thinking about upgrading to windows 10 BUT she gets this message to please be sure to update to the latest version of Dell back up and recovery before upgrading to windows 10..My question is how does she know if she even has this program and is it really necessary for her to do this?P.S. she is running windows 7 right now..
View 1 Replies
I have a Dell Inspiron 17R laptop that came with Windows 8. I downloaded 8.1 and used that since 2013. I am now using Windows 10 and it has been it good transition until the last update. I keep getting messages about dell backup and recovery not being compatible with this version of Windows (Version 1511 (OS Build 10586.11). I would just like to unstall the Dell application since I do not need it. I have a backup of my system should I need it in the future.
View 4 RepliesUpgraded to 10 yesterday. Any way to make a Windows 10 recovery CD?
View 8 RepliesI have a Dell 11 venue Pro (7140) tablet and I upgraded to windows 10. My tablet comes with 128Gb and I found out that I have many recovery partition. I am not sure which one I can remove it using DISKPART. Below is what I seen on the Disk Management Screen. Only C drive has volume label of C.
1. 500MB healthy EFI system (100% free)
2. 40 MB Healthy OEM Partition (100% free)
3. 2.00GB Healthy Recovery partition (100% free)
4. 109.56GB Healthy Boot, Page File, Crash Dump, Primary partition (40% free) Volume OS (C:)
5. 450 MB Healthy Recovery Partition (100% free)
6. 6.59 GB Healthy Recovery Partition (100% free)
I am in of a "Free Back/Recovery Program" that is so EASY as pie to understand. I want to backup my pc and also be able to restore and all of this has to be easy for me to run it. I will be backing up onto my external harddrive.I have tried Acronis True Image and to hard to recover back my partitions and etc..
View 9 RepliesSo I've completed the upgrade from 8.1 pro to Windows 10 pro. I want to do a clean install so I went to control panel to create a recovery drive. After clicking next through the first screen it appears to search for eligible drives to backup to (I'm just assuming here, and I do have a 32GB USB drive plugged in), then just gives up and says it can't do it. No explanation of what went wrong. So I guess no clean install for me..
View 6 RepliesWill I be able to roll back to Windows 7 from Windows 10, using Windows Recovery Disc which I made as a Backup for my Hp Pavillion. I know this question may sound silly, but has a point in case Windows 10 doesn't have certain features which I m using on my PC currently e.g Remote desktop.
View 1 RepliesWe were all excited to get Win 10 and did a clean install, and finally after some time got everything worked OK. At least for my Lenovo Y40-80 it took some time. Now that I am adding software to focus on using most of this laptop. I wanted to make sure I create a system image that is this time in Win 10 to restore if something messes up in the near future.
However, this was a win 8.1 pc and never had win 10 restore in its restore partition that is the built-in Lenovo Restore & It has no CD/DVD Drive to create Natural Win 10 Repair Disc to boot from. So I am trying now to create a "Recovery Drive" on an external USB to keep however since I can't create a Win 10 Repair disc without CD/DVD Drive, how am I going to have access to this Win 10 backup if I have to restore to this point??
Finally I also don't have any clue that; even if I took the risk, and restored back to original Win 8.1 - is it going to be possible to pass again to Win 10 clean install.
Will it be possible without any Win 10 key? What key it passed on to when it did clean install to Win 10 this past september when I did my free upgrade...
How to manage to create a win 10 native backup and were able to restore it without having to go back win 8.1 partition.
Windows10 Recovery USB Media/Drive - Control Panel ( Backup & Restore )
I have upgraded to Windows 10 from Widows 8.1 (pre-installed) , on my "ACER Aspire E1 472P- 6491" laptop by taking advantage of the free upgrade offer and successfully activated Windows 10 . I do not have a Windows (8.1 or 10) product key , as the Windows was pre-loaded on the laptop .
Now I want to make a " Windows10 Recovery Drive ", which can be used later to boot/re-instal Windows10 in case my Laptop fails to boot or to reset/troubleshoot any problems on Windows10 . Accordingly I tried to Create Factory Default Backup via Control Panel ( Backup & Restore ) option, but I found that it is meant for Windows 7 or 8.1 only ( which means that the system can be recovered back to Windows 7 or 8.1 only - not Windows 10 ) .
Why Backup & Restore is meant for Windows 7 only , when I have upgraded to Windows 10 already . In fact I have upgraded to Windows 10 from Widows 8.1 ( not Windows 7 ), then why it is taking me back to Windows 7 ? Can I not create a Recovery USB Media/Drive Backup for Windows10 for future use , after I have upgraded to Windows 10 ? If not , then how to make a Windows10 Recovery USB Media/Drive .
a) After upgradation to Windows 10 , why Control Panel ( Backup & Restore ) option is meant for Windows 7 ( or 8.1 ) recovery .
b) How to create Windows10 Recovery USB Media/Drive Backup that will work to boot/re-instal Windows10 in case my Laptop fails to boot in future .
Yesterday I upgraded from Windows 8,1 to Windows 10. I wanted to clean install so I booted from my USB drive (which has the Windows 10 image and worked before on my other PC) and it didn't work.
Something was corrupt with my registry on the C: drive so I formatted it. Now I can't boot obviously and I get odd error messages like bad_config_info or something like that. I can't even clean install on the damn drive, it gets stuck after copying files.
I really need my laptop ready over the weekend, because my current PC is garbage and also blue screens with Memory_Management. I'm not even bothering with that on a 6 yr old PC.
ERROR CODE 0x80070570
So I made the mistake of upgrading my Dell Venue 8 Pro to Windows 10... It's very slow and buggy.
I tried using the built in "Revert back to Windows 8.1" option in the Settings "app", but it says that files have been deleted and it can no longer perform the uninstallation.
I also tried going into the tablet's built in Backup and Recovery from Dell, but that doesn't allow me to reinstall Windows 8. It's merely a diagnostic.
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6
GPT Partition Scheme for UEFI
Fat 32
8192 Default
X Quick Format
X Create a bootable disk using
X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
I have tried upgrading my Dell venue 8 Pro many times from GWX, installation media and direct download in normal and also after reset of tablet with secure boot and also removing secure boot, removing fast boot and with fast boot using all permutations and combinations. Still I am unsuccessful. I am not finding any way to get support from Dell also. It goes to upgrade 91% always and then says going to reboot. But it reboots to windows 8.1.
View 9 RepliesMy DELL Latitude laptop came with Windows 8.1 Pro x64 on it. I decided that I want to upgrade it to Windows 10 Pro x64.Before I did anything I used DELL Backup and Recovery to create a flash drive so I can always restore the PC back to factory if anything goes wrong during the upgrade process.
After creating the recovery media I used the Windows 10 upgrade wizard to upgrade to Windows 10 carrying over all of my existing files. I primarily did this so my Windows 8.1 Product Key which is injected into the motherboard would officially become a Windows 10 Product Key.Now I would like to do a 100% clean install of Windows 10 through a bootable Windows 10 USB flash drive that I just got done creating but have a few questions:I booted from the flash drive and went to Custom (Advanced) install and I am currently viewing all of the partitions:
Drive 0 Partition 1: "ESP" type: (System)
Drive 0 Partition 2: "DIAGS" type: (OEM)
Drive 0 Partition 3: "" type: MSR (Reserved)
Drive 0 Partition 4: "WINRETOOLS" (Recovery)
Drive 0 Partition 5: "OS" type: (Primary)
Drive 0 Partition 6: "" type: (Recovery)
Drive 0 Partition 7: "PBR Image" (Recovery)
Which of these are DELL related and which of these are just the additional partitions Windows automatically installs?Can I just delete them all and fresh install Windows 10 on Unpartitioned space?Is there any that are non operating system related and might be worth keeping like the DIAGS one?Will my DELL Backup and Recovery media rely on any of these if I delete them and then try to use it later on?Is there any use for any single one these anymore now that I have backup recovery media and will be going to Windows 10?
New Dell XPS8700. Upgraded from Win 8.1 to Windows 10 and worked fine for about a month.
On start-up, it now hangs on the Dell logo or when trying boot options to start from USB or recovery DVD go to blank black screen. Dell phone support sucked but they sent me a recovery USB drive (to factory set Win 8.1), however start-up would still hang at the Dell logo. Tried all different boot combinations from CD/DVD, USB, OS/Boot partition but cannot proceed beyond Dell logo or black/blank screen. I do not have a original Windows 10 OS disc, however did a download from
HTML Code: [URL] .... to USB and PC does not boot up from that media either.
Used an original Windows 7 Ultimate installation CD to start and get to command prompt to recover files from C: drive and can browse through all folders and files. Copied user data to USB drive. So HDD appears OK.
I recently purchased a Hp Pavillion laptop pre-installed with Windows 10. I like Windows 10 because it is simple and to the point. However, I am interested in using certain software like StarDock & such, but it is not compatible with Windows 10. Since my computer came pre-installed with Windows 10 I cannot "revert". I have a Windows 7 iso on my computer & I have tried multiple times to run Windows 7. I ran the installer, it prompted me to restart my computer. and there were two bootable options, Windows 10 & Windows setup.
View 2 RepliesFor a couple of days, I am trying every solution from this forum, for windows 10 upgrade on my laptop Dell 15 L502x (early 2011) with windows 7 Home Premium. I tryed via Windows upgrade system tray icon (after restart - black screen,mouse pointer), then I tryed wit ISO on dvd/USB, same problem. After that I have disable one graphic card, then another, in both cases, same problem. Every time(when black screen come) I tryed with CTRL and then type password - no result. I have updated all my drivers, all updates are downloaded,
View 9 RepliesIf I make an acronis true image back up of her system now, then upgrade vidta to windows 7, then upgrade to windows 10, let it activate, then make another acronis true image backup.....then restore the vista backup.
will I then at some future date, possibly even after the ' free' windows 10 period expires, restore the windows 10 from the image I have ?
sounds bit complicated, but if I leave it too long the free windows 10 upgrade will end..
My folder is:
MediaID.bin
It has all my documents, photos, etc. from a PC that I converted to Win 10 and gave a family member. But I can't seem to get the file to open on my new Win 10 Pro laptop. Is there a program, command or process that will allow to restore all my files to this laptop?
I have an unallocated 1Mb partition as the first partition (according to Easus) on my laptop drive, in addition to the recommended reserved, system and EFI partitions. Could this extraneous partition be the reason for my inability to restore from an image backup? (Restores fail after making my laptop unbootable)...
View 9 RepliesSo I managed to break my partition table, but I was able to recover my entire C: drive and copy every file and folder to an external drive. My question now becomes, is there anyway to, when I reinstall Windows, to restore from that backup (since it's just a data backup of files and folders, not a system image)? Would booting into linux (so that partition isn't in use by Windows) and simply copy-past-overwriting the old files effectively give me my system back?
View 3 RepliesWhere can I get a list of files I need to copy before formatting my hard drive?
View 3 RepliesI want to do a full backup of my drive "C" in the event I have to recover. I'm running Windows 7 Home now. I have a number of apps on it from both Microsoft and Adobe, and I can't afford to loose them if the upgrade to Windows 10 goes bad. Are these the correct steps:
Create a system imageCreate a system repair diskCopy all data file I can find from other hard disks (drives D, E, etc.) Is this all I need to do to have a high level of confidence in the update?
Is it permitted to install the backup image of Windows 10 to a New bigger hard disk in the same PC. After that I will use the new hard disk only and format the old one.
View 5 Replieswith the Critical error Start and cortana not working, I am trying to create a backup. It states one has not been set up. I have a small laptop (HP x360, with no cd disc. I am trying to go back to windows 8 as this Windows 10 error has not been fixed after multiple tries.
View 1 RepliesI am trying to create a recovery USB drive from which I can install Windows 10 fresh, if needed. Or quickly restore system images in case of a drive issue. There are a couple of things I am not clear about.
Background:
I have an ASUS laptop that came with Windows 8.1, UEFI (upgraded to Windows 10 at the moment). Initially, I created a Windows 8.1 recovery USB and reinstalled Win 8.1 using it. From what I understand, the 100MB EFI partition is normally the first one. On restoration, the following was created
305 MB Win 8.1 system partition
100 MB EFI
C drive
Manufacturer recovery partition
When it upgraded to Win 10, it ended up with the following partition structure
305 MB Win 8.1 system partition
100 MB EFI
C drive
450 MB system partition (I believe this is Win 10 system partition)
Manufacturer recovery partition
Questions:
The trouble is, now when I create a Windows 10 recovery USB drive, it really creates just a rescue drive (< 1GB in size) even though the 'copy system files' option is selected. I believe a recovery USB drive needs at least a 16GB drive. Not sure what is happening here?!!!
Also, is there a way to make Win 8.1 recovery create the system partition adjacent to the C drive so it can resize it to 450 MB during the upgrade? Or maybe create a 500MB partition beforehand that Win 8.1 uses during recovery and later is upgraded to Win 10? Can I create the partitions beforehand using GParted Live USB and expect the Windows recovery process to use them?
