Installation :: Unable To Update
Aug 18, 2015Everytime i click reset windows it restarts does the load (48% etc) then it says 'unable to update' and the reset fails and just goes back to how my laptop was before.
View 3 RepliesEverytime i click reset windows it restarts does the load (48% etc) then it says 'unable to update' and the reset fails and just goes back to how my laptop was before.
View 3 RepliesI've got a Nokia Lumia 530 and it was running happily on Win10. With the new build out you had to firstly roll back to 8.1 Update 1, then install Windows Insider and update.Unfortunately I don't seem to have enough drive space to do the update. It needs 1.35 gig and although Storage Sense says 1.39 gig available, it won't progress due to insufficient space. Must be some temp files or something.I've moved every app I can over to the SD card but to no avail.
View 2 RepliesRecently updated a workbench PC and updated it with the Redstone patch. I attempted to sysprep the PC however I am getting the following Error:
'Sysprep will not run on an upgraded OS. You can only run sysprep on a custom (Clean) install versions of Windows.'
I tried updating normally using Windows Update. It fails in less than 10 seconds.
I tried using Media Creation Tool. It downloads the update, but at the end it fails again and tell me restart my PC and try again.
I tried deleting the files at C:/Windows/SoftawareDistribution/Download and then going back to Windows Update. It didn't work.
this Build is crashing and freezing in almost any game that I play or application that I use. I'm only able to use Chrome and Office properly. Everything else usually freezes and crash.
I get the error message: "Windows 10 couldn't be installed - We couldn't update the system reserved partition".
View 9 RepliesHave visited numerous Microsoft sites but cannot locate correct download to update my Surface 2 to Windows 10.
View 1 RepliesI recently did a reset on my Windows 10 laptop and it reset to version 10240. I am not being prompted to update to the latest version via Windows Update. How do I trigger the update to send TH2?
View 9 RepliesSince the start of the program that i've been an insider, but after updating to the RTM build I'm unable to see new builds in Windows Update.
I was in the Fast Ring and updates were no where to found. I left the program, made me an insider again and still not receiving updates. What should be the problem?
After the latest update yesterday of win10, I was able to connect to the internet. But once my laptop was shut down, I've been unable to connect since. Rebooted wireless remote and double checked all of the connections. Defender took over as my firewall from Advast. I've been able to shut off Defender but am still unable to connect to the net. In my wanderings, I did come across "report" that information was being sent but nothing going past some unknown firewall. As far as I know there are only 2; defender and Advast.
View 5 RepliesI am attempting to hide the driver update for my NVIDIA Grapgics card as the one from Microsoft causes me problems.
I am using this program from this link: [URL]
It doesn't matter how many times I run it the Driver update will not hide and therefore I am unable to update my computer without installing this troublesome update.
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod
View 1 RepliesI updated the phone 2 days ago and since then i am unable to send and receive SMS.
O.S Version: 10.0.10149.0
Model: Nokia Lumia 925
I have a Similar problem in which I cannot install the latest windows 10 update I get to 75 percent and then it says it can’t continue and resets.
My computer is a Windows 7 machine upgraded to Windows 10.
I have ran sacs scan and it found corrupt files. Done all the other scans that you have suggested and I did get that source/image is repairable.
Tried all the Command prompts DIM/Online and that would not work either.
Using Microsoft media creation I re download windows 10 Is Mounted it do a dad and pointed the DIM online source to F: it also says that source fills could not be found.
I have even tried to reset Windows 10 but that encounters problems as well
I have even tried to reset windows through ISO and that encounters problems as well.
So I have an HP Envy laptop. Recently web browsing has intermittently become painfully slow on both Edge and Chrome (e.g. loading this website hung for a few minutes) and I have many timeouts on websites. This appears to be the case even when I use different Wifi networks. I do not have this problem with my desktop which shares the network.
I was wondering in Windows was in the middle of some update, but when I click on Settings -> Update & Security Settings, the control panel window simply loads a white field on the right and the words: Windows Update, Windows Defender, Backup, Recovery, Activation, Find My Device, and For Developers. I can click on nothing. The control panel often freezes (e.g. if I click on a web browser I cannot click back on its icon, but can see it if I minimize all other applications) and eventually auto-closes. When I search for Advanced Windows Update settings, I get a light blue screen with the control panel icon in the center which promptly auto-closes. I can access all other control panel options, just not anything below Update & Security.
I downloaded Microsoft Security Scanner and ran than across the entire system; no threats were found. I currently am running Windows Defender which last updated itself this early this morning.
I am using Windows 10 version 1511 OS build 10586.104.
I used to be a knowledgeable Windows user, but stop keeping current a couple of versions back. Does this sound like anything familiar or previously seen?
After automatic online updates by MS the system was automatically set offline by MS!
Notes:
a) hardware is ok - verified by other OS
b) network connections were ok during automatic update and are still ok verified by other OS systems
c) the automatic update is the only change in the software
d) the only message was from MS browser "we are sorry you are not connected to Internet"!
Questions:
(1/5) What can be done ?
(2/5) Windows 10 advices to use online support in the situation MS update set PC offline, why ?
(3/5) How can one use online support after having forced to offline ?
(4/5) Is there any way to prevent Microsoft update to modify network drivers / drivers is general ?
(5/5) Why did the update by MS set the system offline after having completed its operations!
I'm having an issue where I'm unable to download/update any apps from the windows 10 store (on the Minix Z64 mini PC). I have tried everything which has been suggested in various other forums (including Microsoft's). The error code displayed is 0x803f7000
I have tried the following with no success:
- Checking date/time/region (all correct)
- Reset the windows store with WSRESET.EXE (multiple times)
- Ran the windows 10 store troubleshooter app
- Synced the internet time server
I've been suffering from the whole "start menu isn't working, here have this lovely critical error" issue for quite some time now. I've brushed it off as a nuisance and tried to ignore it, but it's really just starting to limit the functionality of my PC so I'm trying to get it resolved.
Most recently, I tried to reset my computer through Settings (keeping all of my files). It starts the process, reboots my PC to a screen that asks me to select the layout of my keyboard... but I've lost all functionality of my mouse and keyboard in the process. I can't select anything to get beyond the screen. I've tried another mouse with no success.
My laptop has been running windows 7 very successfully and after being prompted numerous times to install Windows 10, I went ahead last night. Had no problems with the installation, however, on attempting to close down, the laptop would only turn-off after closing the lid which is not a problem, but after about an hour or so, it turned on automatically again without me touching it. It looks as though it only goes into stand-by. I have not found a solution to the problem - the result is flat battery when I tried to use it today. What is the solution?
View 3 RepliesI have a PC with a 2 drive setup. Drive C: is system drive and drive D: contains all programs etc... installed on PC.When I go to upgrade Windows 7 to Windows 10 I am not able to keep all programs and settings. I am only given the option to do a clean install.
View 4 RepliesI like most everything about Windows 10 but not able to view videos. Technically challenged I need some very simple step by step insruction. If this issue can't be resolved I would like to revert to Windows 7 which worked perfectly for me.
View 4 RepliesThis worked for me a few weeks back. Today I am looking to try to reload Windows 10 on one of my desktop PC's that has just never been right after upgrade from Windows 7. I figured, trying a clean install is in order. The trouble is, as of today, the MediaCreationTool is not working for me. I get the same error on all 3 of my Windows 10 computers: "Setup couldn't start properly. Please restart your PC and try again." I can say that the mediacreationtool worked splendidly a few weeks back, but I have already repurposed that jump drive so the media is no longer in tact.
Specifically, the tools on this page are not working for me: [URL] ...
My PC's have always been real smooth, but now all three are just not quite 'right'. Mouse disappearing hear and there while I am dragging it. Pauses before I can type, etc. Just weird random anomalies that are far from normal.
I did the free upgrade offer to Windows 10 from a Windows 7 Ultimate Dell T7500 with an Xenon motherboard. I am unable to create the "RecoveryDrive" USB from the utility: recoverdrive.exe.
I have google searched for solutions with no "direct" solution. I have upgraded 8 other windows 7 PC's to Windows 10. About half will NOT create the recovery drive. What is the recoverydrive.exe looking for, in order to declare a failure?
Finally, I find on this forum steps to download the windows 10 ISO, using that ISO to build a bootable USB. You are directed to have a Windows key. QUESTION: can this key be the one I have with the Dell Windows 7, to be used with a Windows 10 ISO?
So I own Windows 7 Ultimate, as well as a Macbook Pro with Retina, this means that to partition and use bootcamp, the Mac insists that I have Windows 8 or later to install it on my mac. Now my problem is, I know you can get windows 10 for free if you have windows 7, however I can't install the windows 7 in the first place to upgrade to the windows 10, and because I don't have the windows 10, I can't install the windows at all on my Mac.
View 1 RepliesI am trying to upgrade to Windows 10. I clicked on the flag symbol and a box appeared with a spinning wheel and the message please wait. I waited and waited for 2 hours on numerous occasions but nothing happened and now I recieve a message saying "reserve your upgrade now" but the link still dousent work. Is there anouther way I can upgrade for free.? I dont know if its because millions of people are trying to connect at once or what. What appears in the box when it opens. I have Windows 7, legal as far as I know as I got the computer secondhand.
View 9 RepliesI'm a HP PC users... Just updated to Windows 10 from Windows 8.1. In my Windows 10 I'm unable to install updates..
View 3 RepliesRecently, any program i install will not be able to start. Example is Handbrake, i want to convert some videos to put them on my Iphone so I downloaded Handbrake to convert them. It all installs well as Administrator. I try to start the program, making sure to run it as administrator but every time it gives me the error "Handbrake has stopped working" Ive tried many different versions of handbrake, even their nightly builds but nothing works. Today i want to test ShadowPlay using Geforce Experience. Problem is, I had uninstalled GeForce experience. I installed it again but it will not start. It gives the error "Geforce Experience has encountered and error and must close" Before this programs were able to install and run perfectly fine.
View 1 Replies