Installing GFX Drivers Not Allowed
Jul 29, 2015I got my copy of windows 10 today but when it was all finished and I was trying to install nvidia drivers and shadow play etc etc it fails every time I do it.
View 1 RepliesI got my copy of windows 10 today but when it was all finished and I was trying to install nvidia drivers and shadow play etc etc it fails every time I do it.
View 1 RepliesWhy can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 RepliesJust like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
So, first up, was getting crashes with my windows 10 after installing nvidia driver 359.00, mostly crashes that recovered automatically, then started getting Blue Screens. Tried 359.06 and had the same problems. Rolled back to 358.91 which originally had been stable but after the rollback became crashy, but less than the other 2 drivers.
Had a HARD crash while playing Dragon Quest Heroes, rebooted from that and could not boot into windows whatsoever. Had to pull the card, use the motherboard video, removed the nvidia drivers entirely. I can boot into windows as long as there are no nvidia drivers while using my GTX 670. While attempting to reinstall any nvidia drivers with maybe 5% of the green bar on the installer showing it goes black screen, sits for a bit, then reboots. BIOS looks fine, windows splash comes up, not the password screen, black screen there. Tried what I could find to put the password in and get past he black screen but nothing happening.
Is there a problem with my card or my windows install? I'd rather not buy a new card but its always a pain reinstalling windows if I don't actually have to. how to export all my windows settings if I do need to reinstall.?
I installed windows 10 using the iso option of media creation tool. I did a clean install of it. It worked fine till the time I noticed that the graphics were not installed. So I downloaded drivers for my nvidia 7025 nforce 630a (309.08-desktop-win8-win7-winvista-64bit-international-whql.exe). But when I tried to install it, after some time, the display went blank and i got an "Out Of Range error". I encountered this error in the past, so I tried to boot the system in "low-resolution mode" and then fix it. But Low Resolution mode gives me same error. Need installing the driver correctly, as the performance of the system is damn slow (as it is using microsoft's basic video driver).
View 7 RepliesI have installed the windows 10 upgrade but I cannot find anything about installing windows xp mode. Also I am wondering if you can install drivers in xp mode?
View 15 RepliesInstalled Windows 10 yesterday and things are just not right. I am unable to reduce window size. If I hit the reduction icon with window just goes away. I am also not able to have more than one window open at a time. Since my taskbar is also broken, I have to go back to start and find the program and open it again.
View 3 RepliesSince I did clean install of Win 10 I find it will not allow me to boot to internal cd drive or USB drive. I know this is an attempt to secure the OS or lock you out of competing OS like linux or both but I can find no way around this. My bios has not been updated to the secure boot version on purpose but the OS still intercepts any attemp to boot to any device other than drive with OS on it.
My boot sequence is CD first but it is ignored on boot. Also if I go to boot device selection and select CD drive it still boots to win 10. I have tried win 10 setup but there is no option that i have found that allows me to do what I want with my own machine. I am a developer and routinely boot to cd and this behavior is unacceptable. I would like to use win 10 but have gone back to Win 7 until I can find out how to defeat this.
My PC had a problem installing Windows 10 and seems to have caused a bug that won't allow me to use my start menu (in Windows 10) and other things on my taskbar. After trying many "fixes" I have come to the conclusion that the only thing left for me to do is give my PC a reset and reinstall my operating system. I wish to keep all my files so I figured I should probably back them up. after backing up my current files on to a external hard drive, resetting my PC, reinstalling windows and then restoring the old files fix my problem if it was a problem with the installation or will it bring the installation problem with it?
View 1 RepliesDell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
View 19 RepliesMy cd burner is not working after installing windows 10
View 12 RepliesI upgraded to windows 10 a day or so after it was released and now when I go to plug in my laptop to tv via hdmi or when I plug in an old xbox360 wired controller it keeps telling me that it found the updates for the drivers but encountered an error while attempting to install them. It doesn't give me an error code for this. Also when I check the updated center is says it could not install updates and gives me an error: Error 0x8000ffff.
View 10 RepliesSo I just installed Windows10 - all works well.. installed Steam and Chrome.
I go to install new AMD drivers as well as my Logitech drivers for my G400s mouse and my computer freezes.. cant move cursor, can't ctrl-alt-del - I've tried a million times.
My PC is not OC'd.
so i just wanted to install the lasted version of the driver and when i try to install the driver it will keep on restarting over and over again after it says its done and needs to restart and when the computer turns back on it does the exact install over and over again and it never finishes but my realtek driver still works.
View 1 RepliesEven though I had only 1.3GB used on a 32GB SD card, I could not copy a 7GB file from my C-drive stating there was not enough free space. Why and what to do.
BTW - the sd card was NOT formated in FAT32 and was formated in the NTFS.
I’ve been having trouble with my Windows 10 desktop resolution and icon placement, which started when I tried to change the resolution in an online game. I have a 4K monitor, which is set to 3840 x 2160, and it’s been a mess getting the screen to stay at that resolution. I think it’s stabilized now at that high rate, but I’m no longer able to place the icons in the locations on the screen that I want them. All the icons are gathered on the left side of the screen in no special order, and when I try to drag them to other spots on the screen, they just fly back to their original spot. I’m assuming that all this trouble I’m having is the result of persistent bugs in Windows 10, but is there any kind of fix to make sure that my resolution stays at 3840 x 2160, and that I can move my desktop icons the way I like?
View 2 RepliesAfter I installed windows 10 my printer won't print. It shoots out the paper but it is blank. I checked and all the drivers are up too date. I use a Canon MX860 All in one. It worked fine on Vista, 7 & 8.
View 1 RepliesI have a Synaptics touch pad on my HP Envy laptop. Prior to upgrading to Windows 10 if I went to mouse in the control panel there was a checkbox to check to disable the touch pad if a external mouse was detected. This worked fine. Now under Windows 10 I can still check the box to disable the touch pad but the setting does not stick and has to be rechecked after every reboot. Is there a way to get this setting to stick? There is no disable setting in the device manager for the Synaptics touch pad.
View 8 RepliesI am using Sony VGN-150J with Windows 7, I tried to install windows 10 through online update but it was stuck @ installing featured and Drivers after completing 6%, I wait for more than 8hrs and then restarted my laptop.
I tried with ISO image as well and get the same result it stuck @ installing featured and Drivers
I have already upgraded to WIN10 from WIN7 on my experimental desktop and then reverted back using the built in facility. Can you do this more than once if you keep on wanting to give it a go to see if bugs have been fixed or is this eventually going to cause issues with the license?
View 3 RepliesMy sound won't work after I installed windows 10. I'm using Conexant SmartAudio HD by the way. I tried using youtube for a solution but everything was for older builds.
View 4 RepliesAfter having installed windows 10 on my Asus laptop. Some of the keys are not working.
View 9 RepliesCan I stop windows(10) from automatically installing drivers for my Radeon graphics card? I have an HP dv6 with switchable graphics and I only want to have the Intel HD 3000 graphics working because whenever I install the drivers for the Radeon graphics the laptop will not boot into windows on the next reboot.I have uninstalled the drivers but it keeps re-installing it and the screen flickers every time it installs it.
View 1 RepliesBasically, when I setup my system I run my primary user as an admin to install and set everything the way I like it. After a week or so I remove my primary user from the Administrators group. I then use the default Admin account (usually Administrator) to do any other major changes or installs.
I understand that he default administrator account is disabled by Windows and needs to be enabled, but my gripe is that windows has allowed my only active user, which happen to be in the local admin group, to remove it's own Administrative privilege.
Now I have a PC with one standard user and no way to enable my admin, or otherwise do any administrative actions.
HOW CAN I ENABLE ADMIN WHEN MY ONLY USER ISN'T AN ADMIN?
WHY WOULD WINDOWS ALLOW THIS TO OCCUR?
I've attached a couple screen shots showing my list of users, which will show the only active user and the other 3 disabled (icon shows down arrow); as well as my Administrator group showing the disabled Administrator user...which is disabled.
And I know I *should* have enabled the Administrator account BEFORE I removed my own admin...but I'm here now and need a fix.
I just bought my surface book. I am trying to partition my C Hard drive. I thought that I have to shrink it first, then create a partition. However, the shrink space allowed is only around 3 GB. My disk size is 512 GB.
I defragmented (or now called optimized) the C drive and retried it, but no use. I would like to create a new drive call it D, and leave C for windows only.
I have Windows 10 installed in a VM (Oracle VirtualBox). In device manager, most of the devices show up as generic.
I downloaded the correct driver for my GTX980 video card. I tried installing it and it says "This graphics driver could not find compatible graphics hardware." How can I make Windows 10 see the correct hardware I'm using? Is there a setting in VirtualBox or Windows itself?