Installshield Wizard Not Installing Games - No Error Code Or Message
Aug 13, 2015
When I try to install games with Installshield Wizard, it doesn't install. It acts like it does but doesn't. The progress bar doesn't move at all and it will be like that as long as you let it. No error code or message.
Although I have been notified that my upgrade is ready to install, every time I try this it fails with an error message code of '80070002'. I've followed MS instructions on how to fix but guess what - it still fails.
So i did a BIOS Update on my Msi Mobo. I Have an Activate Windows Watermark on the bottom right corner. But it only just came up randomly after the pc being online and on desktop for 4-5 hours. But if i would to restart my pc my windows would be activated when i first start upp but if i stay online and keep pc online on desktop the activate windows will pop upp again. My key works if I am starting windows with it activated.
Updated 2-3 hour later. So i restart pc the minute i posted this and got into windows and the activate windows wasn't there. But after playing The Division for like 2-3 hours the windows activate came across my screen. And i look up error and theres nothing on google.
After i installed build 11099 i get the message "Your Microsoft account need attention to get insider preview builds" when i click the "Fix Me" button i get error 0x80070005
I am on windows 10 build number 10130(Installed it through an ISO file). I am unable to install any app from either store or store beta. The exact error message is "Something happened and this app couldn't be installed. Please try again. Error code: 0x8007000b". I tried reinstalling the OS, Formatting the sd card and replacing the sd card but the problem persists.
The default location for app install is set to sd card and when I change it back to my pc the apps do install. What is error code 0x8007000b. And how do I get the apps to install on my sd card. Note: I don't want to install the apps to my device memory as I have only 10GB left.
I am trying to install windows 10 via USB on my HP Pavilion G6 Laptop, I deleted the hard disk partition to create new partition, but now when I select that partition, it says that Windows can't be installed on this drive as it is GPT partition. I enabled Legacy boot, still it gives me same message. I tried to create a new partition, it says that it will check to ensure that windows feature works properly and upon clicking OK, it gave this message after a minute : We couldn't create a new partition. Error 0xbdba5840
I updated to windows 10 on my Sony Vaio fit 13a SVF13N25CG (running Windows 8.1 when bought) yesterday. And I updated by following the instructions from sony.
After updated, I wanted to clear all data on my notebook, so I executed windows 10 factory reset (didn't use the factory reset provided by Vaio). So all the pre-installed programs, including Vaio care, are lost. I just want to reset the notebook to the situation when I bought it. However, when I executed Vaio recovery solutions and try to "started recovery wizard" -> "skip rescue", a error 393 appeared (An error occurred while executing an application).
What can I do to solve this problem? I just want to reset my notebook to its factory setting (same as when I bought it).
I made a recovery usb using vaio care before I carried out factory reset. But it didn't work under the rescue mode of Vaio (same as the error 393 mentioned above, to "started recovery wizard" -> "skip rescue", a error 393 appeared).
I have Windows 7 pro installed and then upgraded to windows 10 with latest updates etc for it. it is installed on C drive like normal. i have another hard drive G that i use to install bunch of PC games ranging from new to old. I noticed that when some of the pc games want to install Direct X componets, MS .net redistro packs etc an error occurs saying i do not have Admin rights to do this. I know Win10 comes with Directx 11 and that the pc games have direct X 10 so i do not need that updated every time a game asks same goes with the redistro packs for .net and other comparable components do i need to install these components everytime i install a game? why am i getting an error in which i have to be an admin when i already am in the admin group.
I joined the insider program last year and basically upgraded to all builds from the very first public build. Before then, I was using Windows 8.1 PRO on my Asus Vivobook which was legit (pro license through my school's DreamSpark program).
I was on buil 10240 and decided to download the media creator tool for Windows 10 and chose the first option which was Upgrade my PC.
I chose to keep nothing. It installed, I logged in Windows is not activated. I try installing / updating apps from the store and it won't work. Each time, I get an email from Microsoft saying Device limit reached for installing apps & games. I removed 2 devices.
Now I have 2 devices running Windows 10, the Lumia 822 on insider preview, and Windows 10 Laptop and still have the same issue.
so I UPGRADED MY PC TO WINDOWS 10, AND I IMMEDIATELY GET THIS MESSAGE.
It looks like you've reached your device limit for installing apps and games from the Store on your Windows 10 device. If you want to install apps and games from the Store on another Windows 10 device, remove a device from the device list.
I have 1 device using Windows 10, and 1 computer at work running the insider preview, that's it.
So is this a sneaky [adjective removed ]you catch from Microsoft, I cannot have Windows 10 installed on more than 1 device ?
I have started to get the following error message when I load my desktop from startup:'The group or resource is not in the correct state to perform the requested operation'.
I decided to change my powersupply to the new one I just bought. The powersupply wasnt working properly at first doing things like only one cpu fan turns on and the cpufan light doesnt turn on. I wanted to test to make sure everything was working fine before I close up my system so I did a test with everything plugged in including harddrives. When i turn the pc on I am not getting a message saying "NTLDR is missing". I read its something about the boot drive but I dont know how to solve the problem. I removed that powersupply and plugged in my old one that works perfectly fine and still get the message obviously. Could this be because of upgrading to windows 10 or maybe because started up the computer without a harddrive plugged in or maybe the powersupply somehow messed up my harddrive.
After I uninstalled catalyst control centre (because I was having problems with it). When I restarted my mouse and keyboard weren't working. So I tried a ps2 kb and mouse and this worked. I went to device manager a looked at the USB devices, all of them had a yellow warning sign next to the devices. I checked each one and they all had error 39 (missing or corrupted drivers). I tried updating and uninstalling the devices with no avail. How can I fix this?
Have had home builds for years with no big issues before windows 8.1 and now windows 10. I thought i had issues with memory or graphic card on my previous computer so i ended up buying new parts for a new build.
But nothing changed. Not so frequent as before but up to several times a day my computers gets an BSOD. I must say it is random for me what i am doing while this happens.
Different messages before restarting. The 2 last one while trying to create this thread and making the dump zip file was Kernel check failure and DPC watchdog violation.
For months I have had a problem on my Windows Phone where when I sync my account manually it pops up with an error (and does sync) saying it's not been synced for 2 months (which is not true). My other two accounts don't have this issue. It was never a problem on the PC (Win 8). However, on Windows 10 Mail app I'm getting errors with that account (not the others though). It showed error 80070490 and referenced Windows Phone, even though I'm on a PC.
Okay so i have download threw windows installer, it gets to about 60% on the install (its in the installer not windows update)and gives me an error message (i have not been quick enough to catch it yet) and then reverts right back to windows 8.1. Then MAKES ME re download windows 10 AGAIN!! I am going to try to catch the error the next time, but crashing during install and then reverting back to 8.1 just to redownload it.
Also according to windows update it has failed to install 16 times!!!
I upgraded to W10 a few weeks ago from W7. All went well.
Then 2 days ago i got the windows error code oxc000021a, and the computer wouldn't start. Couldn't get into safe mode, and repair didn't work either. Really annoying. I've had to reinstall windows 7. I can still see my windows 10 old install saved under windows.old.
I don't have any option yet to re-upgrade to W10, despite putting all the updates on W7 again. What can I do to get W10 again and recover my data from windows.old?
Every time i try to upgrade to windows 10 i get an error:
Upgrade to Windows 10 Home
Installation date: 8/8/2015 4:42 AM
Installation status: Failed
Error details: Code C1900101
Any fix that actually works so i don't have to try 100 things. The only thing to note is i have two drives, one is an ssd which is where my current windows is installed and its path is E, not C, just wondering if that may be the problem.
So, for the past 2 days my pc is displaying an unusual behaviour. Every installer that I download does not work.
Some programs like uTorrent or Dolphin or Hijackthis don't work. I have tried compatibility, I have tried running them as admin. And nothing worked.
Funny thing is, they run normally when I boot my pc in safemode. I have researched throughout the internet and I haven't found a similar problem nor solution.
If I access them through the cmd console, they run normally. Go figure.