I every now and then, but lately too often, get a pop up and my screen goes black..that the intel graphics display was not working but has been restored..then after 20 seconds or so the screen comes back on...BUT, it mentions for Windows 8..I have a new PC with windows 10.
View 1 RepliesI get this error on a Surface Pro 3 which I have updated to Windows 10. It normally occurs when playing Minecraft, anywhere from 5 minutes to 1 hour after opening. I have attempted to update the drivers, but it says that the drivers are up to date (which is odd as I am using Windows 8 drivers on a Windows 10 machine).
View 1 RepliesI just updated from Windows 7 to Windows 10. Here's my specs:
Alienware M15x - R1 Notebook
Nvidia GeForce 8600M GT
Intel Core2 Duo CPU T8100 @ 2.10GHz
(if you need more specs let me know)
So, I had problems going from Vista to windows 7 because of graphics drivers in the past, and I assume this is the same problem. What happened was I installed everything, came back and my screen was black, no cursor, with the laptop still on. I turned it off and turned it back on, and after the windows load-up it goes black again.
I tried using windows + p to project to a different monitor, but no luck. I tried a lot of different things that I won't bore you with.
Here's my guesses: My graphics driver is out of date, so once I get that up to date I think I might be good, but I'm not sure.
I'm currently on integrated graphics mode, which I think is working as well. I think the other setting is called external, but I'm not positive. I think when my battery is low and I start up my laptop, it switches to inegrated to conserve power, which is why I'm able to be on here right now.
I just downloaded & installed a driver for my graphics card from Geforce.com, and am gonna reboot, which is why I posted this now in case I can't make it back, lol. If you post though I'll be able to see it on my phone, but I might not be able to respond (I can't type sometimes - it closes my keyboard).
I upgraded both my desktop and laptop to Windows 10 recently. The desktop's upgrade went smoothly; NVIDIA already has Windows 10-compatible drivers. However, my laptop with Intel HD Graphics is a different story. I've tried the Dell-certified drivers as well as the latest ones directly from Intel, and neither work.
When I attempt to install the driver, I get an error message stating "This computer does not meet the minimum requirements for installing the software."
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod
View 1 RepliesI get the message this computer does not meet minimum requirements. I have gtx 970 with latest driver and I installed latest drivers from mainboard site. My motherboard is asrock z97 fatality killer. My cpu is i5 4460.
View 1 RepliesWhile using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 RepliesMy mother has a HP Touchsmart 600 that I upgraded from Windows 7 to Windows 10. Windows 10 works fine on there, once it finally boots up. I've noticed this scenario. Power Button to turn on computerBIOS DisplaysWindows 10 logo displaysscreen goes completely black for a couple of seconds Screen comes back on, stays dark/gray and I can see my mouse pointer and it moves. The boot process hangs here for several minutes, usually and most of the time, the computer doesn't even go past this point.EVENTUALLY, after several minutes, Windows 10 finally gets to the login screen, if it is going to login.
View 6 RepliesNew build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
Alright, My specs:
Intel i7-4720HQ processor
nVidia GTX 960M
Intel HD Graphics 4600
Every time I start off a boot, my intel display driver fails to work. Right after logging in on Windows 10, I can clearly see that the animations are laggy and my computer isn't running on the intel HD 4600 driver. When I open up the device manager I get a yellow triangle next to the driver and I have to disable it and re-enable it, for it to work. This happens after every boot and it's annoying. Everything is up-to-date. And I tried system restore, didn't work. BIOS reset, didn't work. It's a laptop so there is no switching ports and what not.
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 RepliesAs the title says, I can't set the bg image in windows 10, at first it worked perfectly but after a couple of days i cannot set a bg image, if i set any photo as the bg its just a black bg.
Asus VivoBook R553LN
intel core i5 4210U
nvidia GeForce 840m
Ever since the newest major update, my PC has stopped resuming from sleep. It'll boot up (I think) with the keyboard and mouse lit up but the screen always stays black. Takes a hard reset to get it running at which point the sleep data is gone and wasted. I've had allow hybrid sleep on or off, had USB suspend enabled and disabled, disabled fast boot and hardware fast boot. I changed a lot of settings I thought would be related and nothing. Nothing makes the slightest difference.
View 9 RepliesI upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 RepliesWhen i upgraded to windows 10 on my toshiba laptop the display changed from black printing on a white background to blue printing on a black background which i can"t read. my old eyes aren't working so well any more and i would like to switch back to the black on white.
View 1 RepliesI did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replieswin10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 RepliesToday I have been using my PC as usual, I got info of Windows Updates (I'm using Windows 10) I opened up the updates and restarted my PC. As the PC was launching I got no display at all. Blank screen, nothing at all as if the PC was not detected. I tried restarting PC, removing graphics card / ram then replacing them but no use.
View 1 Repliesdownloaded 10 on two pc and a laptop. with the laptop the screen size was adjustable, for the pc the screen is too far to the left unable to see start button. display over sized screen on pc only
View 2 RepliesOkay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 RepliesIs there a way to prevent the screen from turning off when the computer is locked? She likes her lock screen images but the screen turns off after 30 seconds or so when locked. (I tried telling her to use desktop wallpaper, but she likes the lock screen better.)
View 1 RepliesNow have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 RepliesSo the bottom of my monitor display is cut off. It is a Dell ST2010 monitor very old but still in working condition. It has nothing to do with screen resolution btw.
This is how it looks now, the problem started occurring like 3 months ago
This is how its suppose to look when i take a screen shot of it
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
View 2 Replies