So i just upgraded from 7 to 10. Ive never had internet issues. The internet works sometimes for ten minutes then is blocked. Then sometimes work for 2 hours then its blocked. Ive disabled the network connection and then enabled it. It fixes it for 10 minutes then blocked. Ive tried updating my network driver software and it says up to date.
View 3 RepliesHave set up a VPN server connection on my Windows 10 Pro desktop. Clients can connect to the VPN server but can't access the internet through the VPN connection.
I have the identical set up on a Windows 7 VPN server and client can connect through to the internet using that machine.
Everything seems identical in the set up, however the RAS Interface on the Win 10 shows "no internet access," where the Win 7 server does. This seems to be the issue, but can't figure out how to change the settings on the Windows 10 server to make this work...
about a month ago I built a new pc with windows 10 home 64 bit but about 2 weeks ago my computer had this issue where it blue-screens after 5 minutes of use, reboots and works perfectly after that. The most common error message that i get when it goes into blue-screen is MEMORY_MANAGEMENT. Also about 3 weeks ago i was installing an internet card, i plugged in the internet card and the computer turned on. The card didn't click into place so i pulled it out(while the computer was on, i know very stupid) but while i was doing that it touched the GPU and caused a spark. I don't know whether i have incorrect drivers or if any of the components were damaged in the spark.
View 1 RepliesSo for about 2-3 months I've been running hardwired Ethernet internet instead of wifi. I keep my Dell plugged into my tv. The other day I tried to move it and use wifi in another room but I have no option. When I first started with Windows 10 on release day I was using wifi with no problems and when going the Ethernet route it was always plug n play when you going to wifi vs wired.
1. Even after unplugging the Ethernet cord the symbol doesn't change to a wireless symbol the Ethernet symbol just has a little red box.
2. Tried turning airplane mode on and off as well as full pc reboot
3. Right clicking internet from the bottom right of the screen image and clicking open network and sharing doesn't give any wireless options
4. I've tried troubleshooting also with Ethernet unplugged and no success.
So just to repeat Ethernet works perfectly. Wifi used to work. My roommate who also is running the same version of Dell wifi works perfectly. Same account and everything.
The only thing I can think of is the pc updated one day as I have automatic updates and it wiped the driver maybe.
I'm on Windows 10 x64 and my network device is a Intel GbE LAN chip (10/100/1000 Mbit).
My issue is : I have a yellow triangle over the network icon in the notification area and it says me "Network : No Internet" even if i can access to internet and my network works perfectly.
That's not very serious issue but that's disturbing to know if i'm connected or not (real disconnections can happen). After trying to reboot my rooter and uninstalling/reinstalling Intel's newest drivers i don't know what to do.
We just set up a new computer, and from day one, the internet will randomly drop. it wil happen every couple minutes and I have to refresh the computer for the internet to return.
View 1 RepliesI just bought the computer. I'm trying to upload my camera to it. I keep getting the message "not trusted, app blocked,an administrator has blocked you from running app"...
Are there any way to get this camera uploaded to my computer? I don't want to have to buy a new camera.It worked just fine with Windows 8.
I have been using a graphic ping plotter -Nullsoft Netmon- for many years. It has run on Windows from Vista to 8.1 without any problems. After 15+ years on a satellite provider, it has saved me many hours in tracking down slow internet access. I upgraded to windows 10 yesterday. Netmon worked for about an hour after the upgrade and then stopped while I am still getting good internet access..
I am using Viper AV and Vipre firewall. The firewall rules for ping and other ICMP packets block only Public Inbound and I have never had to change this. I have to assume that some change in Win 10 is giving me the problem. Where would I look to solve this problem?
This is an area I haven't had to deal with before and I am nervous about playing with security settings.
I am trying to get hyper-v working but when I am trying to enable hyper v network switch on the network adapter im getting: ''blocked by group policy''. I upgraded windows 7 to window 10 yesterday and its my private computer.
View 1 Repliessomething weird going on with Parental Controls. My son has lost access to Google following upgrade to Windows 10 though, not unsurprisingly, he can get to BING. Is this a glitch or part of the Search Engine turf war between Microsoft and Google? Either way, I would like him to have Google access so is there a way to return the functionality without giving him an open access account?
View 3 RepliesI have a new HP laptop win 10 installed and I like it very much but I have an issues with One Drive .
I use my WiFi connection at home for browsing and usual stuff which is fine and One Drive uploads to the cloud with no issues and of course does not affect my data allowance as my Internet connection is unlimited.
In my workplace I do not have a land line and use a talkTalk MiFi dongle with a 5gb limit . I connected to the MiFi and carried on as normal but realised that the One Drive used my data quickly and soon I had a message that I had no data left .
My enquiry is can I get One Drive to ignore my MiFi connection and only do the uploads on my home internet connection only ?
In attempting to set up Cortana, I get the requirement that location services must be turned on. That is greyed out (which makes sense on a desktop with no location capability). But it is then impossible to proceed with Cortana.
View 2 RepliesOn my surface pro 3 (Windows 10 (latest updates), i5 Processor, 4Gb Ram), when I open multiple applications at one time (ex. Chrome and Photoshop), almost always the programs freeze, then they unfreeze and I get a windows 10 message saying <application.exe> has been blocked from accessing graphics hardware.
View 2 RepliesIn the latest builds (from 10158 to 10162) the option to install Apps in Sd card is blocked. Whether it's only for these builds or will also be blocked in the final win 10 release.
View 2 RepliesBoth these things are happening. I am getting these Windows error messages when running games, or 3D applications.
View 1 RepliesI recently installed Windows 10. When I connect my HP 1102 printer and try to install the driver the system tells me its been blocked by the administrator because its unsage. My user profile says I am the administrator. How do I unblock the driver (tell the system its safe?)
View 4 RepliesNeed to install a printer driver from a cd but have a message : action blocked and have to contact admin. i m the admin and. the pilote is not on Samsung web site. how can unblock the config of win. 10 to be able to insall the driver.
View 1 RepliesI've done some looking up on what the issue is, and I believe that it's something commonly referred to as "sticky corners". There is a few pixels space on the bottom and top of the screen (between both monitors) which does not allow mouse movement from one screen to the other. To get the mouse to the other screen, I need to drag the mouse down about a centimeter and then it moves across to the equal position on the other screen (not the very top, meaning that it's not a scaling issue). I drag windows around constantly, and they keep getting stuck in the top or bottom of the screen, and it's quite distracting.
As you see in the screenshot that I've attached, the small red line is where the mouse simply refuses to move across, regardless of the speed of the mouse.
This was apparently a feature in Windows 8.1 as well, which there was a solution for by messing around in the registry editor, however this is no longer the case in Windows 10 (the files which used to be edited are no longer there in 10).
How to disable these "sticky corners" ...
I am experiencing a strange issue with the updates of Windows 10 due to the disabled Defender. I have installed AVAST Free which in turn has disabled the Defender. With the Defender disabled, the system tries to update it and fails, but it also blocks the rest of the updates.For now I have fixed this by uninstalling AVAST.
View 6 RepliesBut I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
Working on desktop Lenova computer. I was updating the computer drivers when one of the drivers froze, I click on cancel. I tried the internet and it stated No Internet Connection. I went into Device manager and did the unthinkable. I deleted everything inside the Network Adapters, including the words Network Adapters. In other words, no Network Adapters are showing in Device Manager.
First, I would like to know how can I replace the words Network Adapters in the Device Manager menu, and download the two adapters that were there in the beginning. Lastly, how to get back the Internet to work again.
I am on Win 10 and can only access the internet with Firefox. When I try to connect with Edge I get the error message "Hmmm, we can't reach this page" and if I try through Internet Explorer I get "This page can’t be displayed". Chrome seems to work along with Firefox, but both will freeze quite often.
View 1 RepliesI have an Asus laptop 64-bit recently upgraded from Windows 7
My Windows 10 seems to be fine, except for the mail app inbox and notifications.
I have checked all the settings, but they must be correct anyway, because occasionally, an email arrives correctly in the inbox and I get a notification correctly. Then the next few just don't arrive in the inbox, but interestingly, when I click on "All mail" they are all there.
I have removed my (GMail) account and then reinstated it, but that made no difference.
I have tried to uninstall the app using Powershell, but it asked me for "parameters" and I didn't know what to do at that point!
how to make the inbox and related notifications work correctly?
When I right click on something to get the context menu, it sometimes works and sometimes does not.
Here are three images showing how it appears. As you can see, there is a completely variable response as to what appears. I am using the standard Windows 10 theme in a completely fresh install (not an upgrade) on a new hard disk.
I upgraded to windows 10 on my desktop pc on july 29th and haven't had any problems since. I know that upgrade/updates are forced to happen so when random issues occurred today I feel that maybe there was an update sent out? My ethernet no longer works, only to connect outside my LAN, but I can still remote desktop and access the computer so the port/cable still work and the router works for all other comps over ethernet. The internet goes in for a split second when I reset the adapter but then instantly goes out. I also noticed when launching a steam game the xbox controller no longer works to control it despite it working yesterday and the controller will control steam itself just not the games. Should I downgrade to windows 8.1 again, since I don't have internet anymore any fixes wouldn't even reach my computer?
View 1 RepliesInstalled Win 10 a few months ago, everything was fine, have now istalled the latest update Win 10 version1511 [OS Build 10586.14] and the printer will not print.
View 4 Replies