Is There Any Possible Way To Upgrade From Bootable Flash Drive?
Aug 3, 2015
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop. 2.Windows will start up to the login window and then freeze. 3.Computer will start, have a blank screen, but still have mouse that i can move. 4.Computer will start with error "hard disk (3f0) Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
I need to create a windows 10 PRO ISO on a flash drive to do an upgrade. They already have Windows 8.1 PRO so they need to upgrade to the windows 10 PRO version.
On the windows media creation tool, I only get an option for windows 10, not any other version of it. Where can i find the official ISO file for it.
I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
I bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
I have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
After the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.
I upgraded my PC from W8.1 to W10, all went very smooth. I then worked on upgrading a laptop SSD drive to from W8.1 to W10 which I planned to then install in my wife's laptop. It was easier for me to upgrade the drive on my PC then swap the drives than take her laptop for awhile. Well...that created my problem. I had 2 drive C's on my PC.
I was able to boot quite a few times between the drives (swapping the primary drive in BIOS). But then W10 "fixed" my drives, and now I have only one C drive (the SSD laptop drive) and my original C drive is now F. My PC now only boots to the SSD C drive and I'm not able to use Disk Mgmt to swap the letters. Disconnecting the SSD drive stops the PC from booting because the original C drive is F.
How to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
I'm interested in the W10 free upgrade from a usb ISO image. I now have W7.
A couple of questions concerning the W10 installation from a bootable usb ISO image - will the hard drive require prior repartitioning, and what do I do when the install process asks for the license key ? AS I recall, installing W7 without a key only allowed 30 days of use.
In Windows 10, I insert the flash drive and the File Explorer window opens. I then double click on a file to open it's supporting app. I close both the File Explorer window and the app and eject the drive. The first eject results in a "device is currently in use" message. The second click displays the "Safe to remove" message.
If I don't open the app and just close the File Explorer window, the first eject attempt is successful.
In Win 7, I could eject the drive without closing the Windows Explorer window or the app. Ejecting the drive would close the Windows Explorer window and leave the app open, displaying the "Safe to remove" message. The file would remain in memory to be read. But an attempt to save it would fail.
I'm currently trying to upgrade my Windows 7 computer to Windows 10. My attempt at upgrading to Windows 10 fail time after time. That's when i remembered I didn't install the optional update KB3064209 .Unfortunately, the infamous "death loop" happens when I do install; this only happens for Pentium G3258 users which I happen to be one. So to fix this I found out Asrock, my motherboard is the Asrock B85 Anniversary, released a bios update that says it's for the "update microcode 19". This happens to be what KB3064209 is... a microcode update.
Link to new bios (it is the version 1.40): [URL] .....
The question is should I flash my bios for this situation? After all the warnings I've read about never flashing bios unless something is a catastrophe?
I was going to make a USB Flash Drive to install windows 10 as described in tutorial by Brink. But I find that ISO has been removed?? Can I still make Flash Drive / How?:
Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
Windows install says ( Can't install on USB flash drive.). That's how it sees my SSD. Do I have to put my original HDD back in, image SSD to it and then try to install?
Whenever i try to eject my Sandisk flash drive, by right-clicking on it's icon and clicking on "Eject Cruzer",I get an error window with the title, "Problem Ejecting USB Mass Storage Device".The message says, "Windows is unable to stop the device 'USB Mass Storage Device'. Don't remove this device while it is still in use. Close any programs using this device and then remove it."
This only happens the first time I attempt to eject my flash drive since connecting it.The second time I try to eject it, it always works.I know it's not a problem with my flash drive, because it works just fine on other computers.I tried uninstalling and reinstalling the driver for the flash drive in the Device Manager, but that didn't work.
I'm trying to update my desktop to Windows 10. I got the update, and downloaded it, but when I try to update via "Windows Update", it comes up with "Windows 10 couldn't be installed.""You can't install Windows on a USB flash drive using Set-Up".I don't understand, the only USB ports being used are for mouse, keyboard and PS4 controller for some games, I'm certainly not trying to install windows on a USB.
I created a Windows 10 restore flash drive on my computer, which was updated to Windows 10. If I use this flash drive to reinstall Windows, will it restore Windows 10, or will it restore the system from the restore partition on my present hard drive?
Installed Win 10 and get it working. My problem is I have Win 8.1 Pro on a Samsung EVO SSD T-1. I went out and bought a Samsung 225 gig SSD HDD to install Win 10. I downloaded the Win 7 ISO and it worked perfectly. When I first tried to install Win 10 on the boot up with the USB flash media drive I went into setup on Win 10 and when I selected the new hard drive for the installation it gave me a message that it could not install on that drive. The other partition on the drive said system info. I hit delete and it installed. I don't know if I should have re formatted.
I go to bios setup on my motherboard Asus Z-97 and select Samsung EVO and it goes directly into Win 8.1 Pro. If I reboot and select in the bios Windows media drive it boots into Win 10. My question is I thought (based on all the screen shots I see here in the forum) that when I boot up my computer it should take me to a blue screen with 2 selection boxes Win 8.1 pro or Win 10 and I should be able to select.
I would rather see the 2 boxes where I can select one of them. My last question is when I bring up my Win 10 the fonts on the menus and etc. are so small I cannot hardly read them. I am using a LG 21.9 3440 x 1440 ultra wide monitor and have my text at largest and my screen zoomed to 150.
