My computer is Windows 10 64-bit and i cannot install java. I have almost tried everything,i have downloaded all the latest versions of java offline and online and it still doesn't work i have tried installing older versions but still nothing happens. I click the java installer, I click yes and nothing happens. i cannot play several games with this problem.
View 1 RepliesInstalling Java on my (fairly) new Windows 10 64-bit machine. On my previous version of Windows (Windows 7 64-bit), I had Java (32 bit and 64 bit) installed, and it worked perfectly. However, I can not get it to install on my current machine, no matter what I do?
I downloaded the offline installer for Java 32 bit, and 64 bit, from the manual download page: Java Downloads for All Operating Systems. Upon trying to run the 32 bit installer (which you are supposed to install first), nothing appeared to happen. So I left it for about 20 minutes, and found it still wasn't doing anything when I came back. So I brought up my task manager to check if anything was running in the background, and found "Java Platform SE Binary (32 bit)" running there. As it appeared to be doing nothing, I ended it, and tried running it again, only for the same thing (nothing) to happen.
I then tried the 64 bit installer, thinking maybe something had changed, and Windows 10 just didn't need the 32 bit version (upon later research finding that this is an incorrect assumption on my part). Same story with the 64 bit installer as well.
Frustrated, I tried to search my computer, to see if it had added anything. There were no new program entries, and no Java section in my Control Panel, but there was a new folder in my Appdata, LocalLow, called "Oracle," containing a Java folder, with a "jre1.8.0_65.msi" file.
I tried to run the MSI file, but got the following message: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I tried their official support on this matter: Error 1721: There is a problem with this Windows Installer Package. But none of the listed steps, even all used in conjunction, did anything.
I also tried their online installer, rather than the offline one (even though I need to use the offline ones in the end, because I need 64 bit), and it had the same issues.
In short, I run the installer, and nothing happens, no window, no errors, it just runs in the background indefinitely. I have tried installing in safe-mode, verifying/repairing my system files, running the installer in all available compatibility modes and as administrator, turning off my firewall and anti-virus softwares, and nothing has worked thus far.
I was trying to open a jar file, so I opened with any other program like adobe reader, didn't work.
I realized I needed to install Java, and did, but now it wont choose java as one of the apps to use to open it.
I've tried a lot of things before asking this, including downloading Java, setting it's destination to the desktop, and tried using the executable files in that to run the .jar, so now I can't tell if any of those files are the correct Java.
I have java installed on my machine, but can't see it in my browsers, FX or Chrome ( I know it won't work in Edge).
I have checked the box 'Enable Java controller in the browser' under the security tab in Java Control Panel.
I am trying to run a program with Java software in Windows 10, yet it is not letting me. I have been reading that it has been an issue after the update.
View 1 RepliesI noticed recently on Teamspeak that I've got some packet loss, up to 10% at a time. This has shown itself in games as well, most notably League of Legends where my ping will be stable, yet I lose control of my character for up to five seconds at a time. I tried doing a test on pingtest.net but it says that Java doesn't seem to be installed on my browser, why? I've un-installed and re-installed Java but it still says this message: "Pingtest.net requires Java for packet loss testing, but it does not appear to be installed in your browser. Click here for assistance."
View 11 RepliesWhile accessing a site to activate Java permission ..Spartan does not access Java permission as Internet Explorer does.
View 16 RepliesWhenever I open something that uses Java it always crashes and says this: [URL] ....
Is there something I can do to fix it? Should I install a different version of java?
I've been trying to install java but the installer just looks like a blank window.Java installer not working. URL....
View 1 RepliesI seem to have two instances of Java installed on my Win10 Pro 64-bit Laptop .. see screenshot below. Can I safely uninstall one of them?
If "yes" then which one? I have no clue how I ended up with 2 x Java installs on my laptop. I'm assuming I should keep the 64-bit install, and delete the other? I use Chrome as my usual browser, but very occasionally use Edge
When installing a software, I keep getting an error like the attached pictured
My PC is Win 10 64
The Program to run is in 32 bit
Java 32 is installed
Java was tested using Explorer browser
I've been having this issue with Java Update Scheduler running on his own and ramming my CPU usage to 80%, 10 to 15 minutes every time after I boot the PC, and every time I need to manually close it. I've searched it up online and people recommended setting s manual task scheduler for it, I did, it didn't work .
Some people recommended disabling "check for updates" in the Java configure window but I didn't even have Java installed, where this came from and how that process starts and why. So I installed Java, disabled updates and I still get this issue every time I boot the PC, I officially give up since I don't know what to do anymore.
I have reinstalled java and have java 8 u 60 64bit. i have set factory default on my router. i have restarted the computer and minecraft.
Oother places say minecraft can't communicate with itself, although java is allowed in firewall both private and public..
java.lang.ExceptionInInitializerError
[10/10/2015 18:26:35 PM] at net.minecraft.server.MinecraftServer.<init>(MinecraftServer.java:146)
[10/10/2015 18:26:35 PM] at net.minecraft.server.integrated.IntegratedServer.<init>(IntegratedServer.java:45)
[10/10/2015 18:26:35 PM] at net.minecraft.client.Minecraft.func_71371_a(Minecraft.java:2091)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiCreateWorld.func_146284_a(GuiCreateWorld.java:230)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_73864_a(GuiScreen.java:225)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiCreateWorld.func_73864_a(GuiCreateWorld.java:377)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_146274_d(GuiScreen.java:296)
[10/10/2015 18:26:35 PM] at net.minecraft.client.gui.GuiScreen.func_146269_k(GuiScreen.java:268)
[10/10/2015 18:26:35 PM] at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
Every time I open a java program (netbeans, mc) it crashes after about 3sec. The aplications works when I run java 32-bit but I can't run anything with more then 1,5Gb of ram and if I change to 64 (deleting 32-bit and installing 64-bit)the aplications just crashes after 3sec. I've tried running both java 7 and 8 but it still crashes. I believe it's a problem with windows 10 but I'm not sure...
Error: Java(TM) Platform SE binary has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Close program
I reinstalled Windows to try to fix an issue, but it did not work. I am installing my programs to an alternate drive, and would like to install Java there as well. I know about the JRE_HOME environment variable, but it can only point to 32 OR 64-bit Java. Is there any way to have both running simultaneously without need to switch the variable to the 64-bit path? I think that this does happen when I install to the default location, so how can I do that?
View 3 RepliesIs their anyway to speed up window 10 have tried deleting all history,flash,java and cleaning up disk nothing seems to work...
View 1 RepliesThe Get Windows 10 app started up while I was writing this post!
I have been preparing one of my office PCs for an upgrade from Windows 7 Home Premium to Windows 10.
When KB3035583 and the rest of the preparatory updates came out last summer I hid them - on all PCs.
One every other PC I restored these updates on and installed, the Get Windows 10 app started right up.
But on this PC (the one in my System Specs) after restoring all the updates and installing them, the Get Windows 10 app does not start.
Using the MS fix to diagnose the app returns the error: "Unsupported Version" > Details: "Windows is not up to date". Checking Windows Update yields nothing new to install.
(Windows 7 Home was installed first on this PC from a 3-license retail disk, activated, and legitimate. It has never been reinstalled on this PC)
I click on the "get windows10" icon and it tells me that every thing is ready to install. So I click on " OK, lets continue" ...
A new window opens telling me "working on it" I had this run for 30 minutes and nothing changes.
I rebooted and started again, same results. I tried this several times, no joy. What am I missing?
I am trying to update to Windows 10 on a laptop currently running Windows 7. The problem is that the initial "10 second" prep has been showing "working on it" for over 4 hours. I have tried rebooting and starting the update again but it still doesn't get any further than the "working on it" screen.
View 1 RepliesAfter installing the new WIN 10 on my PC I'm having a problem trying to boot up. Windows starts to load but hangs up and I have to shut my computer down and re-start every time. Also every time I wake up the computer from the sleep mode I have to re-start my WIFI connection to get online. I would like to re-install WIN 10 to see if this fixes the problem. I tried to reinstall WIN 7 using the disc but I get an error message that says I can't reinstall my version. Do I need to completely erase my hard drive first?
View 3 RepliesI lost power throughout the night and my desktop keeps coming up with "your pc did not start correctly". Restarting it won't work either. When I troubleshot and do a "reset this pc" it keeps coming up with "there was a problem resetting your pc" no changes were made". Nothing is working for me.
View 3 Replieswell Windows 10 installed smoothly starting from inside hub.The computer from my wife installed in the same way, BUT while i can get the STARTSCREEN, she gets the older start that was there in some of the previous builds.
View 9 RepliesI have installed win10 on to my Brothers PC and kept getting the message `Inaccessible Boot Device` and was caught in a loop. I then downloaded the iso file on to a disc and re-installed successfully from there. However when we switch on the PC I get a screen which shows two boxes, One reads Win10 and the other Windows. When I click on Win10 the OS loads. How do I remove the other box?. I have installed Win10 on two other PC`s and have not seen this screen before.
View 3 RepliesHave just installed 10 on a spare drive and installed that drive into my Sandy Bridge and the machine is now going through an endless loop of start up.
I can hear it make some sort of noise as if something wants to go and I have again tried the machine with the old 7 install drive and the same thing is happening.
The other thing is I am not getting a RAM beep or the BIOS to come up on the Gigabyte board (DEL) have jumpered the reset pins for the BIOS but still no BIOS or for that matter any graphics.
I was having no problems with Windows 10 until the last few days when Windows 10 automatically updated. It seems I have lost the function of right-clicking on the Start Menu button also since this latest upgrade Windows 10 will not recognize my Saietek joystick...I'm not sure if these 2 issues are linked but they both started happening in the last 2 days.
View 8 RepliesHad an unused SSD laying on my desk so decided to put Windows 10 on my primary computer. Had a few problems getting it installed from my Build 10041 iso but finally got it updated to build 10061. Was having problems booting up and kept getting an initialization failed error. On a whim tried a restore point and low and behold it booted into Windows 10. Problem now is I can't open the start menu. Clicking on the taskbar icon does nothing and the ctrl/esc keyboard combo doesn't work either. It will be a bit of a pita but if all else fails I can plug my Windows 8 drive back in and format the Windows 10 drive for a reinstall. Wish Microsoft would hurry and post up a build 10061 iso download.
View 11 Replies