I just upgraded from windows 7 64bit to Windows 10 and it will not recognise CD Drive there is nothing wrong with the CD Drive as I rolled back to Windows 7 again for a short while and it worked perfectly...
View 2 Replies
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
I got a 128GB Flash Drive which I proceeded to install a portable, bootable Fedora install on. Of course, naturally, since Fedora is light weight, I had all sorts of other room left over. However, when I plug the USB drive back into the main Desktop, it no longer asks me what I want to do with the USB drive, even with AutoPlay stuff disabled. It's as if the USB Drive doesn't exist.
However, I checked quickly on one of my laptops that has never seen the drive and the AutoPlay on that device immediately popped in. When I selected "view files and folders", voila, I could see the Flash Drive with a folder for the Fedora install and plenty of other open space.How can I force my computer to see this Flash Drive all over again? it's doing the same thing with the storage on my fiance's iPhone. since I can't see her phone anymore when I plug it in (even iTunes doesn't see it).
Error message says module not installed. After upgrading i was supposed to receive KB3051704 update to correct this problem. Is that what's wrong or something else. I need to be able to use the dvd drive. I never received the update.
View 1 RepliesI installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 RepliesIt really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
I have downloaded Win10 onto my laptop. The DVD is: UltraNote Series: 8x SATA DVD-R/RW/Dual Layer (+ 24x CD-RW)
I thought that everything was fine after I had re loaded Norton which had disappeared. All other icons and programmes were intact. I then attempted to load another program via a disc but found that win 10 doesn't know that the drive exists.
I am using my PC with win 7 to type this info.
My PC has three hard drives. A Samsung solid state drive (840 series) that has windows and all games / programs on it, and two older Samsung HDD's (HD753LJ, about 7 years old) that I use to store videos, photos, music etc. It had been working fine in this configuration with Windows 7 for years.
I recently upgraded to windows 10 (in place upgrade, not a clean install) which worked OK except one of the two HDD's was not found by Windows 10. After a couple of turn off / turn back on cycles it found it and was OK for a little while. However it stopped finding it again and now hasn't worked for a few weeks.
If I boot into BIOS it lists all three hard drives as boot options, but only two come up in disk manager / device manager / my computer within Windows 10. Is this a Windows 10 problem or is the hard drive dying? (The timing would be very coincidental if it's not a windows problem).
So as of recently I am running Windows 10 on my pc. I however noticed one thing: I have an SSD and an HDD installed.
I installed the OS on my SSD ofcourse. Now it seems that Windows 10 recognizes my SSD as a regular drive, and not as an SSD. Due to this, I am unable to install SSD drivers. I use the Samsung Evo 850 SSD.
Yesterday, Friday 7, 2015 I upgraded by computer to the Windows 10 operating system from Windows 7. Since then, however, my CD/DVD drive is not detected and/or recognized.
The icon on my device manager has a icon of Media with a ? mark on it and when I click on it blank.
I have looked under Device Manager for the CD/DVD drive, and there's nothing there.
I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.
The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.
The drive is a Samsung SH-223L.
Autoplay is ON
The DVD drive worked fine prior to installing Win 10 - now the computer doesn't recognize it. Win 10 apparently thinks it is a removable drive. The CD-DVD drive is recognized in BIOS.
How do I diagnose the problem?
My dvd player drive isn't listed and when you try and play a dvd the player spins but doesn't play anything since upgrading to windows 10. I have checked in device manager and it says device is working properly. I have also done the upgrade driver and it says I have the latest driver.
View 2 RepliesWhen I changed my pc case I didn't bother to hook up my optical drive because I didn't really use it. today i went to hook it up and it works fine but it wont show up in file explorer. it only shows my c drive. is there a reason for this? my drive is ASUS 24X DVD Burner ...
View 1 RepliesI have a SATA-1 TSSTcorp TS-H653 (not sure whether it is an F, G, H etc.) CD/DVD writable drive in an Inspirion 537s. I recently upgraded to Windows 10 Pro from Windows 7 Ultimate, but the drive is not recognized by the OS. However, the drive does show up in BIOS. I have searched and cannot find a driver for this drive.
View 9 RepliesWe were all excited to get Win 10 and did a clean install, and finally after some time got everything worked OK. At least for my Lenovo Y40-80 it took some time. Now that I am adding software to focus on using most of this laptop. I wanted to make sure I create a system image that is this time in Win 10 to restore if something messes up in the near future.
However, this was a win 8.1 pc and never had win 10 restore in its restore partition that is the built-in Lenovo Restore & It has no CD/DVD Drive to create Natural Win 10 Repair Disc to boot from. So I am trying now to create a "Recovery Drive" on an external USB to keep however since I can't create a Win 10 Repair disc without CD/DVD Drive, how am I going to have access to this Win 10 backup if I have to restore to this point??
Finally I also don't have any clue that; even if I took the risk, and restored back to original Win 8.1 - is it going to be possible to pass again to Win 10 clean install.
Will it be possible without any Win 10 key? What key it passed on to when it did clean install to Win 10 this past september when I did my free upgrade...
How to manage to create a win 10 native backup and were able to restore it without having to go back win 8.1 partition.
I just 'upgraded' to Windows 10 yesterday from 7. Windows 7 has a generic photo upload program that activated when I hooked the camera up. Windows 10 does not recognize my camera in G drive.
Is there a generic program available to upload photos? Samsung support says they do not support Windows 10.
Previous Win 7 did recognise apple equipment so that I could download photos to the desktop but although I tunes syncs with my phone and pad, win 10 will not show them in explorer. How can I download pics without using the cloud?
View 1 RepliesI just upgraded to Windows 10 as I planned to use the weekend to sort out any issues I might encounter during the upgrade. Well boy did I ever. My Seagate 3TB drive decided it no longer wanted to be recognized by Windows anymore. It shows up as a failed/deactivated drive in Disk Management as seen here: [URL] It also shows up in Speccy as a physical drive. I currently have 2TB of data on there (including an OS image I did just before the upgrade as an extra prep step), so reformatting the volume is not an option until I get the data off.
View 9 RepliesI upgraded my windows 7 computer to windows 10. I have an external hard drive that I am unable to open. When I connect it to the computer now, a reformatting window pops up asking to do this. Obviously, I don't want to delete the data on there as I used this drive as my backup. How can I go about opening this drive?
I checked on someone's else computer running windows 7 and my data is there, but my friend upgraded his computer to windows 10 and now I can't transfer data that way.
The hard drive is a WD Scorpio, model WD25000BEVS. Don't know if that is useful. I am wondering if part of the issue is that I have this harddrive is from a previous laptop that ran windows vista. That computer failed bcs it was a subpar HP product. I literally baked the motherboard several times for it to work. I finally gave up and got a new computer but kept the drive. I should have reformated it but I only deleted everything but the user folder.
I am wondering if part of the issue is ownership of the drive. I know that when I first used this drive I had it take ownership of the hard drive. I know this can be done in window 10, but I can't seem to ever open properties of the harddrive while its plugged in.
I finally upgraded to W10...upgrade went smoothly and at no time during the process was I asked to input a password. When the upgrade was finished the first screen asked for a password. I put in the password that I had been using for the welcome screen on W7 but it was not accepted. How I can either create a new P/W or get past this welcome screen.
View 3 RepliesHave a new laptop that has Win 10 Home pre-installed...no recover disk was supplied. Is there a way to see if this laptop is a clean/fresh factory install of Windows 10 Home....or was upgraded at the factory from a Win 7 and/or Win 8.1 ? It was sold as a Windows 10 Home laptop ?
View 6 RepliesI have an HP Officejet 6700 All-In-One printer which is connected online, no USB. The unit has been printing and scanning up I until I upgraded to Windows 10. The printer still works but I can not scan. I tried doing the command prompt "SFC /scannow" but the system could not find any problems.
View 6 RepliesCan't log into Cortana. Won't let me click on to my microsoft outlook account. And thus I can not get into edge.
View 5 RepliesOk i have a pc and a dell laptop that upgraded fine. My gateway has not upgraded past 10061 , i tried doing a reset and it just reinstalled 10061 with the same problem.
View 2 RepliesWhen I open camera, it is not working and in skype also...
View 1 Replies
