I have a Logitech wireless keyboard that uses a USB device. After a update on the 10 of March my keyboard stopped working. I have tried another wireless USB keyboard Mircosoft and a a wired Microsoft keyboard without success.
I have followed a few of the suggested fixes after doing a search without success.
After upgrading my Dell Inspiron 15 3521 to windows 10, my number keys stopped working.
I have updated the touchpad and keyboard drivers but they are still not working.
My mouse and keyboard don't work. I just want to play counter strike...
View 1 RepliesAfter upgrading my Dell Inspiron 15 3521 to windows 10, my number keys stopped working.
I have updated the touchpad and keyboard drivers but they are still not working.
On my main Windows 10 machine my mechanical keyboard has suddenly stopped working. The keyboard itself works perfectly fine on my other systems and laptops but seems to not work on my main one. The keyboard works on the bios screen and any other part of the start up except from the login screen which is when it seems to completely stop responding. Buttons such as caps lock and also the num-lock stop lighting up the LED's and no keys seem to work. The computer recognizes other keyboards, which is how I'm writing this post, but it seems that my expensive mechanical doesn't work on this specific machine.
The keyboard itself is one that only requires the HID Interface, so you just plug it in and it works and I've even tried uninstalling all keyboard drivers but this is still no dice. I'm not really quite sure what to do, seeing as the keyboard only seems to go wrong on this machine, and other keyboards work fine,
I have a Toshiba Satellite laptop. It kept prompting me to upgrade to Windows 10, so I did so. Now the button that disables my touchpad (also the F5 button) is not working. The touchpad will not turn off.
Secondly, when I try to move the cursor, the "right click" menu pops up wherever the cursor lands, and it will not let me type. I have to use an external mouse to click out of the menu, then put the cursor back where I wanted it to land.
How can I make the disable button on my keyboard work again, and how can I fix the mouse so that the right click menu only comes up if I actually right click?
Today my keyboard stopped working, there was a usb error message pop up but i didn't realise what it was about, then then my k70 corsair keyboard stopped working, i tried restarting and doing an sfc scan but nothing changed, then i started looking into device manager but all the drivers were up to date so i tried reinstalling the HID keyboard driver but nothing changed, i then looked into the event viewer and found the issue (attached screenshot)
View 5 RepliesAfter installing windows 10 on my HP laptop PC, some keyboard keys have stopped working. The keys that don't work are: { 'escape' 'g' 'h' 'backspace' }. I am sure it is not a hardware problem because on occasion, all the keys that previously did not work, start working again. In fact, as I am typing this thread, my keys are working correctly. When they stop working, I try to uninstall or update the driver in device manager but that does not work. Keep in mind this started happening after installing Windows 10. I have not had this problem in Windows 8.1.
View 9 RepliesStart > Power > Shutdown did not anymore shutdown the PC... I had to do reset and restart Window 10 again. What can be done ? Command mode shutdown ?
View 7 RepliesThe HP Solutions Center stopped working after Security Update for Microsoft Windows (KB3132372) was installed Apparently this update controls how flash player is used. HP Solutions Center uses flash player and will not start. I use the HP program frequently to scan documents and photos. Is there a work around for this, or do I have to uninstall this update?
View 4 Replieshave a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 RepliesWas installing Win 10 last night. Since it was late she went to bed letting it run. This morning it was @ "configuring update for Win 10, 55% complete, do not turn off computer". I hasn't moved off 55%. I'm not sure what to do.
View 1 RepliesMic stopped working after windows 10 update. I can't raise the db levels and it does not record any sounds. Its like its muted all the time, but i cant unmute it. Its an HyperX Cloud II if that matters.
[URL]....
I have tried to update an older laptop to Windows10, three times, or roughly 8 gigs of data. In all three attempts it has failed and stopped at 32% of the installation; and in all three attempts Windows had to automatically roll back to Windows, in my case Windows7.
Searching for solutions, none of them work, one of those solutions is to disconnect all your peripherals and try again based on the error you see in the image. I only have one peripheral and I seriously doubt it would cause Windows10 not to update when I have the same device on another machine and the update to Windows10 worked successfully; although I disconnect the one peripheral and I was right, same problem, Windows10 failed to update ?
Sorted my Matshita dvd-ram and also a Lite On portable drive for me.
Right-click the Start button > Command Prompt (Admin) and type
reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
Win 10 was working well on my Toshiba Satellite.(i7 4 gig ram).Then I lost the ability to download with Cannon Camera software. This program stopped working. ( got off pictures by removing SD card and putting it direct in laptop.)Next computer slows down and run st 55 to 60 Deg C. (air temp about 23 deg and desktop computer running at 35 deg.)
Then Blue screen telling me Video_Krnl............ failed/error.Ran restore point and system worked again for a while(2 days).Now I can only get 3 to 4 minutes before blue screening and failing. Have blown out cooling fins but little to no dust as computer is only just one year old. Regularly run AVG and Wise 365 cleaner over it.
This morning when i turned on my computer the sound was not working.I reinstall all my sound drivers, i reboot my computer a lots of time, i cheked if everythings was pluged correctly and everythings was supposed to be fine but the sound don't work !
View 1 RepliesRecently i have upgraded to Windows 10 from Windows 7. Everything was fine the first hour, then all of the sudden the mouse stopped working and it was no where to be seen. The mouse that I use is an old Logitech mouse that has a ball to control the mouse. So, I plugged in another mouse and it was working, but the clicks were backwards.
View 1 RepliesRecently discovered Windows Explorer stop working. Ran SFC /ScanNow result were some flies were repaired, which directed me to C:WindowLogCBSCBS.log, nothing found there. What to do, it was only by accident I discovered it was not working, no error messages or any signs.
View 2 RepliesThe start button on windows 10 has stopped working for me. It came right after I installed a new graphics card though in the days before I had noticed strange stuff like when I searched for an app and clicked on its icon within the start menu nothing would happen. File explorer, settings etc stills works but are very slow.
View 2 RepliesI checked on the stability report last night, and I found out that the "Get Office" app has been having issues every single day.
The computer does not crash, and there was no error message. Without examining the stability report, one would never know there's anything wrong.
I uninstalled the app, and everything seems to be fine now. I sign onto Windows locally, without using my Outlook account.
I Tried to connect to my 2 other PCs this morning. I just get a screen where it says it's 'Initialising Display parameters' but will not get past this screen.
Was working perfectly yesterday! I can take control of these same computers if I try it from my Linux Ubunto PC. So that rules out the network and all of the other PCs which are still on win7
I tried the other day to search for a program on the start menu and it worked fine. I then set up Cortana for speech mode and all I get now when typing in the box are four blue dots scrolling at the top of the search box.
View 2 RepliesMy start menu stopped working several weeks ago and I have been trying all the suggestions found of the various forums with the exception of reloading Windows 10. It looks like Microsoft should be responsible for publishing a solution to this problem realizing how many people are having the same trouble.
View 5 RepliesOn October 29 the start button and the Windows 10 taskbar stopped working. I have called Microsoft tech support and chatted online five times but they have not been able to resolve the problem. Windows 10 worked alright for over a month, but then this problem occurred. I believe there was a Windows 10 update around that time.
View 9 Repliesmy most used App the Windows Weather app has stopped working, I click on it to open and it open and then closes again right away. Is there anyway I can fix this? Is it a common Win 10 app system fault with the app or is my PC specific that has the problem?
View 7 Replies
