Laptop Always Goes Into Recovery Mode After Upgrade
Nov 11, 2015
I upgraded from Win8.1 to Win10 on my Lenovo Laptop and every thing was fine .Then i went and installed the Nvidia driver for my graphics card and restarted .On doing the restart i was getting a blank black screen. So then i went into safe mode and installed the Intel graphics drivers that came with my laptop and restarted .
On doing the restart I am always going into recovery mode now . Even if i try to boot in safe mode it goes into recovery mode. I tried even to do the windows repair via the recovery mode but it does not work.The only thing that i have is the command prompt in recovery mode .Can I install the latest driver via command prompt in recovery mode ? or how should i fix this issue ?
View 9 Replies
Similar Messages:
Nov 12, 2015
I upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop then flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired .. Due to critical system driver missing or corrupted (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse.
I've searched for the last day forums and most people seem to have boot/bcd errors and so don't work for this problem. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
View 1 Replies
Oct 22, 2015
Yesterday I made an update from AVG, which needed the pc to be restarted. I did restarted it, and during the update it gave me an error page starting with " " and after it...my pc wouldn't work anymore. When I started it, it started with the black page showing pc components information and after that another black screen with a _ on the top left of the screen going on and off forever. Then I maneged to put Win10 driver in a Usb drive and I tried to boot from it, and it entered Recovery mode. Here I followed a guide which told me to select "Troubleshoot", then "advanced options" and finally "startup settings". The only problem is...there is no "startup settings".There's everything else but not startup settings, so I can't even try to make it work. How can i make my PC work again?
View 5 Replies
Dec 19, 2015
All of a sudden my Dell Inspirian PC crashed with a continuous message on screen: Recovery Your PC/DEVICE Ned's to be repaired. Please see the screenshot of error. I need to find out as to how I can now copy and save my documents on an external drive before using the recovery USB.
View 3 Replies
Sep 1, 2015
A couple of weeks ago I upgrade from Windows 8.1 to Windows 10. Now I'm going to sell my laptop, so I've decided to reset Windows 10.
I opened settings, update & Security, recovery and then chose the "Reset this PC" option. I chose Remove everything, but then I get prompted with a window saying "Could not find the recovery environment. Insert your Windows Installation or recovery media, and restart your PC with the media.
View 1 Replies
Nov 7, 2015
I recently upgraded my laptop, specifically "Acer aspire v5-473pg" into windows 10 and now I'm trying to do a clean install. The problem is there's a lot of partition on the partition menu when proceeding into a clean install and I don't know a lot about them. My laptop comes with win 8 single L and I didn't upgrade to windows 8.1, is it safe to delete this partitions (i'll attach some images)
btw my laptop didn't come up with installation disc or recovery disc. Can I just delete them all? I mean wouldn't they harm or do any corrupt files in my laptop? I found out that those recovery partition is essential if I don't have any recovery backups and MSR partition is from windows itself. Any step that I must do to clean install windows 10? should I just format Partition 4:Acer"? would it still be considered clean install? or should I delete something from this partitions?
View 9 Replies
Dec 2, 2015
I would like to revert from windows 10 to windows 8.1, as I install a preview version of windows 10 which has a so many bugs and due to that my phone is getting hang and unable to use lot of features
View 1 Replies
Oct 20, 2015
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 Replies
Jan 26, 2016
after performing an upgrade, I have 2 recovery partitions, the same size, one at the beginning of the disk and the new one at the end of the disk
I only need one, right?
Two ideas came to mind:
1 boot into linux, copy the contents of the second partition to the first partition, and then delete the second partition.
2 use EaseUs partition master to delete the first partition and then move the second partition to its place.
View 8 Replies
Jan 16, 2016
I accidentaly shutted down the Lenovo Yoga tablet 2 8" Windows 8.1 during Win10 update. The system won't boot and I don't know what to do. Recovery partition is also corrupted.
What I've tried so far:
1) Install clean Win10 x86 Home copy using Microsoft Media tool - Windows will be installed, but touchscreen, sound etc. doesn't work. Windows Update is unable to find and install those drivers
2) Install clean Win 8.1 x86 Enterprise copy using Microsoft Media tool, then in repair mode try to switch Windows.old Windows, Users and Program Files with current system - doesn't work, the system won't boot and everytime I try to boot the system, it tries to repair system. Without success of course.
Download Windows 8.1 with Bing x86 in hope the system will be in the same condition as I bought it. I also hope it will find required drivers.
View 1 Replies
Oct 18, 2015
I just upgraded to win10. at boot up, my raxco instant recovery app is supposed to initiate a progress bar that gives you 10 seconds to click f1 in case you are having a problem, and you can retreat to a different snapshot. The progress bar isn't materializing. How I can correct this. I didn't have this problem in win7.
View 4 Replies
Sep 25, 2015
My Dell venue pro 11 tablet comes with a 32gb inbuilt space with windows 8.1. Then I got the free windows 10 upgrade which went smoothly.
But now the problem is after the upgrade there was very little space left in my Cdrive. The recovery partition takes up 6.5gb of space. I thought of deleting it using a 3rd party software.
I need to free up that space, currently i have 11 gb free space, adding this would give me 17 gb.
View 6 Replies
Jan 16, 2016
I have a Dell laptop with Windows 10 on it. When it goes into sleep mode, if I swipe the touch pad within a few seconds it will come out of sleep mode. However if I'm not at the computer so that it is in sleep mode for a while, then when I swipe the touch to pad wake it up sometimes it will wake up but sometimes it won't. If it won't wake up then I have to use the power switch to shut it off and reboot it.
View 5 Replies
Oct 30, 2015
I am having a hard time trying to get back to normal mode. My external monitor vga driver was automatically turned off when computer restarted in safe mode. Now, I am working blind, I know there is a sequels of keys to press when computer starts up in order to return to normal mode.
View 3 Replies
Dec 13, 2015
Been using this laptop since October with no issues. Upgraded to Win10 yesterday and now, every couple of hours, the laptop goes into airline mode. Once I was able to restore wifi in the settings area, but most of the time when you turn off (move the slider) to airline off, the wifi slider does not come on.
The keyboard method does nothing to restore wifi. My wife has had the same issue since upgrading two weeks ago.
View 3 Replies
Dec 16, 2015
When I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.
What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings
What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found
When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt
View 3 Replies
Mar 6, 2016
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
View 1 Replies
Aug 17, 2015
windows 10 has got some serious problem which is with the AEROPLANE MODE.
View 1 Replies
Apr 7, 2016
I have a Dell 11 venue Pro (7140) tablet and I upgraded to windows 10. My tablet comes with 128Gb and I found out that I have many recovery partition. I am not sure which one I can remove it using DISKPART. Below is what I seen on the Disk Management Screen. Only C drive has volume label of C.
1. 500MB healthy EFI system (100% free)
2. 40 MB Healthy OEM Partition (100% free)
3. 2.00GB Healthy Recovery partition (100% free)
4. 109.56GB Healthy Boot, Page File, Crash Dump, Primary partition (40% free) Volume OS (C:)
5. 450 MB Healthy Recovery Partition (100% free)
6. 6.59 GB Healthy Recovery Partition (100% free)
View 3 Replies
Jan 30, 2016
Just installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
View 5 Replies
Dec 31, 2015
I have a Lenovo P580 laptop. The screen wire got shorted out, so I just always connected it to a TV and never really had a problem. I recently upgraded to Windows 10 from 8.1. After getting that issue with the start menu and cortana not working, I tried the make another profile, etc stuff from the internet. I changed my laptop to always load into safe mode using command prompt... NOW, every time it loads up, it loads into safe mode... only problem is I can't see it or do anything because the output for my tv doesn't work.
So... I bought a new wire for the laptop screen... nothing. Bought a new screen... nothing. So I assume the motherboard is damaged... The HDMI and VGA ports worked up till I set it to boot into safe mode...
Is there anything I can do? short of replacing the motherboard?
View 9 Replies
Sep 27, 2015
This happening right after i instal 10 on my laptop. Its about 5-10 mins after my laptop sleep then its shut down automatically.. And i believe there is nothing problem with power & sleep settings.
View 1 Replies
Aug 11, 2015
How can I fix the sleep function for an HP laptop using Windows 10? After it goes into sleep mode, it won't wake-up. Have to cold boot to restart.
View 2 Replies
Mar 10, 2016
Laptop does not wake up from sleep when either power button, keyboard buttons or mouse touchpad are pressed. A forced reboot is always required. HDD light off, monitor stays black and battery light and fan still on.
Have had this problem for over a week since downloading and using Advanced SystemCare and Driver Booster. Once the problem occured I uninstalled them but nothing changed. Also there was a few recent windows updates at beginning of March but haven't read anywhere that they are causing similar problems. Have tried the obvious fixes but nothing seems to work.
SPECS
Asus X555LA
Windows 10 Home
Intel® HD Graphics Family
BIOS version date 14/08/14
View 3 Replies
Aug 30, 2015
I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
View 9 Replies
Aug 24, 2015
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 Replies
