Laptop Crashed / Boot Media Missing And BIOS Can't Detect Drive
Oct 6, 2015
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS/UEFI setting. And my BIOS/UEFI can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
My project is due in 3 days and I've got all my files in there. Is there a way to fix this? Or to recover my files?
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS setting. And my BIOS can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
Installed Win 10 and get it working. My problem is I have Win 8.1 Pro on a Samsung EVO SSD T-1. I went out and bought a Samsung 225 gig SSD HDD to install Win 10. I downloaded the Win 7 ISO and it worked perfectly. When I first tried to install Win 10 on the boot up with the USB flash media drive I went into setup on Win 10 and when I selected the new hard drive for the installation it gave me a message that it could not install on that drive. The other partition on the drive said system info. I hit delete and it installed. I don't know if I should have re formatted.
I go to bios setup on my motherboard Asus Z-97 and select Samsung EVO and it goes directly into Win 8.1 Pro. If I reboot and select in the bios Windows media drive it boots into Win 10. My question is I thought (based on all the screen shots I see here in the forum) that when I boot up my computer it should take me to a blue screen with 2 selection boxes Win 8.1 pro or Win 10 and I should be able to select.
I would rather see the 2 boxes where I can select one of them. My last question is when I bring up my Win 10 the fonts on the menus and etc. are so small I cannot hardly read them. I am using a LG 21.9 3440 x 1440 ultra wide monitor and have my text at largest and my screen zoomed to 150.
Originally the DVD drive would not show at all in File Explorer, despite Device Manager recognising, drivers up to date, etc. Dell diagnostics reported various feedback ranging from perfectly ok (SupportAssist, on-line smart diagnostic quick test) to failing some tests (on-line optical drive tests) and requiring attention (sadly, the attention it suggested I use was a 'fix' tool on the Microsoft website that would not run on Windows 10 operating platform so I have not been able to persue further)
Things improved a little after downloading and installing all of the urgent and recommended Dell updates, plus installing all of the Windows updates. Now the laptop shows the drive in File Explorer, and occasionally media is recognised and even played. For example, inserting an audio CD into the drive immediately after booting up will run autoplay and the tracks are displayed as expected in File Explorer.
However, subsequent CDs (or any other media) are not recognised. The drive 'acts' like it should (led goes on, whirring sound made, etc) but nothing happens. File Explorer displays whatever the previous media contents were.
So for example, if I insert an audio CD with 10 tracks immediately after booting, the CD will autoplay and the 10 tracks will display in File Explorer. Everything seems fine. If I then eject this CD, and put in an audio CD with 5 tracks, File Explorer will continue to display the 10 tracks from the first CD. The new CD wont autoplay. Its basically not recognised.
This is quite frustrating because it means I have to reboot every time I want to change media.
My custom-built pc all of a sudden won't boot in to windows. i get the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key", and i have made sure that my hdd is my first boot option. i want to reinstall windows now because that seems like the only way out, but i cant because i have no recovery usb or disc. what can i do to boot to this harddrive, that my bios detects just fine.
I am using build 10130 NL, today I got update to build 10240. After the update I have the problem "Missing operating system" . I am using a ASUS X77J series laptop with SSD drive.
My laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
How do I boot from dvd drive on HP laptop? According to Google it says press esc repeatedly and then f9. I did this and it did not work so I went into the BIOS and changed boot order to cd/dvd drive at the top but it will not boot do I have to press another key?
I elected to postpone the Win 10 upgrade for two days to allow me to save an image before installing the new OS. However, when the process requested a restart, I naively went ahead and to my horror, the Win 10 install was underway
As all too often in these situations, the install on my Dell Laptop (Win 7, Home Premium), stalled at 44%.
Hitting the reboot key had the install attempt to reinstate the original OS. This failed.
I'm presently in the situation where a reboot asks for the Win 10 installation disk, to enable a reinstall (I presume). Obviously I do not have an installation disk.
Not to be deterred, I attempted to reinstall a relatively recent Win 7 image using my Dell software recovery disks. Things seemed to proceed in an orderly fashion until at a point I received a blue screen of death a consequence of the disk software saving my computer from terminal damage (as if I wasn't terminally damaged anyway) .
Now, as we all know, at any given time there is incremental data on our disk that will be lost in any format, even in the event of a successful past image recovery.
I guess the question is this: If I were able to access a Win 10 installation disk, and use it, what is the likelihood of this screwed installation recovering itself in such fashion that I end up with a Win 10 OS and my data intact?
I encountered this issue recently, and it's caused me a fair bit of frustration. I keep searching for solutions but it seems nobody has any. What I can do to restore Windows 7 (preferably with my files intact) or at the very least finish the upgrade to Windows 10?
ASUSTeK COMPUTER INC. X551MA Serial #: E5N0CX006715187
Windows 10 Core (10.0.10240.16590) my computer crashed brings up Recovery file: BCD Error code: Oxc0000034 then goes to Aptio setup utility screen. i signed in as administrator and added passwords now i just need to know what i need to do from here.
I have a new all in one desktop. I want to use the monitor as an extenal screen for my laptop. I connect the hmdi lead from the laptop to the AiO hdmi input socket. The laptop 'sees' the external monitor (Fn and F5 tells me this) but the monitor will not detect the laptop.
Windows kept asking me for the password upon startup and would not recognize the password I input each time. So I would have to reset it. I went to the forum and read how to shut the password feature off by holding the windows key + r , typing the letters provided and unchecking the box. The system then asked me to restart. My laptop will not restart - blue/black screen appears and nothing else.
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
I had updated to Windows10 a couple weeks ago. Everything was running smoothly until my most recent NVidia gfx driver update. It seemed to stall at 99% completion and then I lost the sound to my computer.
After numerous attempts to fix my sound I decided to just restore my computer and wipe it clean. Big mistake.
Again upon 99% completion of the restore process my computer crashed and then entered an infinite loop and booting and loading to a screen that would say "innaccessable boot driver".
This seems to be a common problem with windows10 and people who restored or wiped their computer, they all got the same error message I did. Except the fixes that have worked for them aren't working for me.
I have even purchased a fresh copy of windows 8 and a new SSD in attempt to remedy this but to no avail. Even after removing my other SSD's and keeping only the new one in, it now loads to a screen that says "reboot and select proper boot device, or insert boot media in selected boot device and press a key".
I have tried messing around in the bios but nothing I do seems to work.
I have a MSI g45 z87 gaming mobo Gtx780 Kingston ssd
I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:
- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options - plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal - plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV - reinstalling nvidia and onboard-graphics drivers and update to the latest - Made a clean install of windows, tried windows 8 also but the same result - Updated my BIOS and EC - Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable
Just realised that, since I upgraded from Win 7 64 Home Premium to Win 10, it has not detected the laptop's Bluetooth device. It doesn't even feature as a device in Device Manager ... not even one with a problem.
I have an HP Laptop. I have the Insyde H20 bios. My bios menu does not have the option of overclocking CPU ( even though my CPU does to 3.9Ghz ( i7-3940XM Extreme Edition))
My bios menu does not have he option of increased video sharing (Video Memory).
My bios menu does not allow my ram to run at higher ram speeds.
My bios's version is HP's F3.A
Are there any UNLOCKED HP or ANY bios menus with that have these options for the insyde h20 bios?
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
Am trying to re-install iCloud on a 32 bit machine and keep getting the error message that I am missing media features and to download them. I have downloaded the Media Feature Pack for N and KN versions of Windows 10 and installed, but no luck.
Have tried the "Turn windows features on and off" trick to see if WMP was unticked and do not have any Media Features options at all.
Computer seems to have wmp in C:Program Files (x86)Windows Media Player, but cannot run it as it is saying that it is not properly installed and needs to be reinstalled. Clicking on the link takes me here:
I've just bought my first SSD and want to install windows 10 onto it. I used the media creation tool to install the OS onto a bootable USB but when I try to install the software onto my SSD I get an error. It reads:
"A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now."
I have tried hooking up my optical drive and inserting the disks that came with the motherboard and graphics card but it says it can't find any drivers. I'll attach an image below of the problem I'm facing.
I have an i7 build, asus z97a mobo i upgraded my graphics card from an nvidia 970 to a 980. When i powered up system went to bios, i cant get windows to boot. I reinstalled the 970, still no windows, then tried onboard graphics, took out mobo battery and jumper on board to reset, still cant get windows
I'm a student and my university has a subscription to Dreamspark, so I got a Win10 key, along with an ISO-file from there. I'm using a Lenovo G700 and trying to perform a clean install from a bootable USB-stick.
I have tried creating this USB-stick with the "Win7 USB DVD Download Tool", using different guides from the internet with NTFS and Fat32 filesystem, launching the setup normally and through UEFI, using the "Media Creation Tool" ([URL]) to create the USB-stick directly and downloading the ISO file first and creating a bootable USB-stick from that with all the methods above, but no matter which of these methods I use, I get the following error during installation:
"A media driver your computer needs is missing." (URL)
Unfortunatley, I am currently running Win7 Pro x64 on my laptop and the following page says, that the upgrade to Win10 only works from Win8.1, not Win7: [URL]
When I try to use the "Media Creation Tool" to instantly perform an upgrade, I get the following error:
"Something happened... 0x80070422 - 0x90016"
What drivers could the installation possibly be missing? I don't have any external devices plugged in, except for the bootable USB-stick, of course. I tried downloading all drivers for Win7 x64 and Win10 x64 from the Lenovo page ([URL])
