I recently bought a MSI laptop, and decided to update the BIOS.
However after the update my laptop just doesn't boot anything, no USB, no hard drive, nothing.
I already enabled/disabled secure boot, used UEFI etc. and tried to flash the BIOS again, but nothing worked.
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS/UEFI setting. And my BIOS/UEFI can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
My project is due in 3 days and I've got all my files in there. Is there a way to fix this? Or to recover my files?
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS setting. And my BIOS can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
Exactly as it says on the title. When I power it on, the GPU fans go full blast, it stays that way for a little while and shuts down automatically. There's no splash screens or anything either so I can't go into safe mode. Sometimes it shuts down almost immediately and then starts up again by itself. Sometimes it seems to start fine, the fans spin at their usual speed, but nothing appears on the monitor and eventually it just shuts down again, it's not properly booting up though because my drawing tablet's lights don't go on when I plug it in.
All this after the latest update. I restarted the thing so it would install the updates, but it got stuck on "Restarting" screen with the dot things spinning. I left it for several hours until I forced the shutdown and it has done this stuff since. I do recall the task manager not starting up from the security screen though.
What I've attempted so far:
Taken the battery and power cable off and held the power button for atleast 2 minutes.
Taken the second graphics card off. And reset the battery again.
Left it overnight like that to see if it would actually do anything (As if).
Started it up without the battery.
Tried to get into safe mode, nope.
My laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
I have an i7 build, asus z97a mobo i upgraded my graphics card from an nvidia 970 to a 980. When i powered up system went to bios, i cant get windows to boot. I reinstalled the 970, still no windows, then tried onboard graphics, took out mobo battery and jumper on board to reset, still cant get windows
View 1 RepliesMy problem is that I can't access UEFI Firmware settings or Boot from USB/DVD in the Advanced startup. They are missing. What can I do? I want to go back to windows 8.1 (Don't have windows.old folder), but it gives me an error when I install it when windows is running. That's why I want to boot from DVD, but I can't.
View 9 RepliesI was playing with disc partitions and i accidentally deleted something... The problem is, that when i start my computer, Windows boot manager error appears (with no options, nothing, just some text about how should i reinstall / repair...), but when i start my computer, i have no way to access BIOS (I know how to access bios in my pc, I was accessing it like 20 times during last few days while installing various OSs... always with F2).
So actually I am stuck in a loop: start pc - cant access bios - windows boot manager error- restart - cant access bios - win boot manager error - restart....
With windows, i had problems with accessing bios before, but it could be solved by some kind of "absolute shutdown" of a system - holding shift while clicking "Shut down" - then i could easily enter bios with F2 during start.
Have a Dell XPS 8300 which came with Win7 Home Premium. 10-12 days ago, finally got my system upgraded to Win10... but, after completing the password, all I get is a black screen.
FINALLY figured out it's because this motherboard came with an on-board VGA and delivered with an add-on VGA/HDMI board... It's truly annoying... but tapping Window-P (keys) gets me to where I can choose "which screen"... biggest rub being I'm doing it in the blind.
Soooo... I want to get into my PC's BIOS to disable the on-board video... at other times, I'd like to be able to change other BIOS stuff like Boot Sequence, etc. HOWEVER... Win10 seems to have disabled the keyboard (no F2, F12, etc) until Win10 takes control and intercepts. Googled and found several "fixes" but none work.
how I can boot this system... and get into it's BIOS... PREFERABLY directly at startup?
Also, why does SHUTDOWN NOT totally power this machine off?? Hate internal lights being on... keep seeing my Ethernet lights blink... and getting tired of pulling the cord?
I have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then made sure drivers were updated. However, I did not upgrade my BIOs, from the information I had seen from MSFT. Didn't think twice, since they said if you were upgrading from 8 or 8.1 that should not be an issue. The system was running stable, after I did those fixes.
About 1 week ago, after a MSFT Windows automatic patch push, My monitor started not to respond during boot up. Ran some basic troubleshooting for the monitor (Ie: check plugs, check cables, check Video card). They all seemed to work fine and my system booted up normal.
The very next day, cold booted again and monitor did same thing, it was not getting any signal from the computer. Went through the checks, after a little bit of a delay the system finally booted. I checked my BIOs settings, which were all set up normally. I locked my computer after that and did not turn off the system, the next morning, my monitor was unresponsive.
I re-checked monitor, cables and even replaced the video card. Everything is good except no signal to my monitor. I disconnected all hardware except the video card and motherboard, to see if it was an issue with my power. I took out out the CMOS battery and also disconnected power to the motherboard for about 2 hours, to try and reset the BIOs to factory. No luck.
This leaves me with 2 things left:
a) Corrupted BIOs, not loading my drivers, or
b) motherboard went bad.
Going to try a bootable USB BIOs next.
I just got a new gpu put into my computer. A few things were changed around in the settings. It boots fine and everything is good. Except my number lock key use to light up during boot and I would just keep hitting delete which is my mobos command to enter bios and it would go in. Now when booting the numberlock key doesn't go on and just pressing delete doesn't work. It just goes straight into my windows login.
My computer works %100 fine and I just need to change 1 thing in the bios but I can't get into the setup. How to get my numberlock on during boot or to get into my bios? I don't even see "hit del to enter bios" at the bottom of the screen anymore. And my numberlock key doesn't even go on during start up until the windows login. I went into my settings and unchecked the fast boot up option in the power settings menu. Nothing has worked yet.
I have upgraded Win 8.1 Ent into Win 10 Enterprise. While upgrading I had an older version of BIOS. Since then I have upgraded to the latest BIOS version available for my MOBO. My MOBO is ASUS's P8H77.
I can not boot or restart into BIOS from Win 10. I have googled the problem and it was mentioned something about new UEFI method of OS installation. When I am trying to restart/boot using the Advanced Boot option my OS is missing the "UEFI Firmware Settings" option, therefore I can't get into my BIOS.
My questions are:
- All this is happening because I had an old version of BIOS and when I upgraded something got screwed up?
- Does my motherboard support Win 10 UEFI option at all?
- Do I need to do clean install? Is it possible to avoid such option?
Reason for all these trouble: My PC freezes when I leave it working overnight. I do not know how to troubleshoot it because no reason for the freeze is indicated in the Even Viewer. Why the heck my PC freezes? I do not get any BSOD or errors, just a freeze and the only way to reset the PC is to hold down the power button.
I turned on my PC and got a Windows 10 error saying my PC needed to be repaired. I can go into the BIOS menu but I don't know what option to choose to reinstall Windows 10. I have it downloaded from the official website on a memory stick but I am thinking of buying Windows 8.1 from Amazon cause I do not like Windows 10 and want the full version. I would go with Windows 7 but I don't know what is and isn't legit on Amazon. I do not want an OEM version since I may be upgrading my PC and will want to reinstall Windows if I have to once again.
View 1 RepliesBefore i upgrade to windows 10 from 7, do i need to update the BIOS? I have heard a lot of things can go wrong like the motherboard can get bricked.
Currently my bios version is 0805 (06/01/2014). The latest version is 2306.
Motherboard: Asus B85M-E
CPU: i5-4590
GPU: Asus Radeon R9 270 2GB
Yesterday I got a notification that my windows 10 upgrade was ready on my MSI GT60-0NE laptop and decided to give it a try because I really disliked windows 8.1. Windows update went through downloading the files and preparing the computer for installation. It then did the usual, configuring updates on the blue screen, got to 100% and just shut down completely. I left it there for about 5 minutes and decided to try to power it back on. When turning the computer back on, it stayed on for about a minute and then cut itself back off.
After waiting a minute it turned back on, then back off again. It kept repeating this for about 5 minutes. During this phase I saw absolutely nothing on the screen, no MSI loading splash screen, no cursor, absolutely nothing at all. I couldn't enter the BIOS, couldn't run recovery or even get into safe mode. Absolutely nothing worked. The battery light was also flashing blue which I had never seen before. During this time the hard drive light was flashing and flickering the usual red light.
I did a hard reset on the computer and then turned it back on. When i powered it back on the screen was still completely blank, no MSI splash screen, no cursors, couldn't enter the BIOS or anything. During this time the hard drive light was a steady red. The blue battery light was no longer there and it was back to its usual constant red light. After about 10 minutes the computer turned itself off. Being frustrated I left it overnight and tried again this morning.
When I power the computer on now, there is no hard drive light. It doesn't even give a single flash of red. The computer will stay on but just stays there at the black screen. I've tried to look for solutions but I can't get anything to work. The only thing I can hear running is the fan.
I've tried to remove the hard drive and boot to see if I could get into bios, still a black screen.
I've tried removing the video card and booting to see if I could get anything through integrated graphics, still a black screen.
I've tried to plug the computer into another monitor, still a black screen but it does recognize the signal.
Specs for the GT60-0NE 403-US:
Intel Core i7 3630QM (2.40 GHz)
Nvidia GTX 680M (4GB)
Windows 8.1 64-bit (Windows 10 now?)
i had secure boot up and running on my windows 8.1 machine after a clean install, but now since Microsoft upgraded me to windows 10 it seems as my secure boot is off again, but it's enabled in my bios is so weird, it's enabled in bios but off in windows 10? Is not much of a big deal to me in a since but just wondering why it still shows as on in bios but off in windows 10.
View 9 RepliesI have a Linx 8 tablet running Windows 10, and despite several hours of web/forum trawling I cannot access my BIOS settings to view my boot manager, either through the Settings/Restart method, or in Safe Mode. I can get to a screen that lets me choose between either UEFI Settings or Boot Manager (by holding the power and the volume up buttons together at start up). Selecting the UEFI option takes me to the expected prompt, but choosing Boot Manager just starts Windows as normal. I simply cannot access my Boot Manager; I have disabled Fast Boot.
View 9 RepliesI was given an error message on reboot and followed a guide to editing the registry to restart the download. The download did not restart however, and my windows 10 is stuck in an endless loop of rebooting. I have downloaded a copy of windows 10 and put it onto a USB, but when I try to boot from USB it takes me back to the BIOS. The BIOS are 'Aptio Setup Utility 2011', and don't seem to allow me to change from UEFI boot to LEGACY boot, although the option is apparently there. Why the USB boot is not working correctly and how to make it do so, I am more than happy to reformat the computer but at this moment in time it's useless. The computer is an Alienware x51 from 2011. As previously mentioned the operating system the PC is trying to boot (or install) is windows 10.
View 4 RepliesI finally got around to building a computer and it was working fine until a few days ago I turned it on and something strange happened. Directly after the msi dragon bios prompt screen, when it should be booting Windows, the screen starts flashing white with two black squares on it. It only seems to happen after it has been off for some time, like over night, and after turning restarting it a few times it eventually works. For some reason invidia driver 355.82 does not like Windows 10 try darkbreeze's solution and install driver 355.60.Here is a parts list
i7 4790k
msi Z97-G45
msi gtx960 4gb
evga supernova 550 g2
G. skill Ripjaws 2x8 ddr3
Samsung 850 evo 250gb ssd
Migrated OS 8.1 from HDD to SSD . Migration software installed command line in bios "Boot Manager on Disk 1". If I do a format of SSD will bios revert to original without the reference to disk 1. I intend on doing a clean install of Windows 10 retail version in UEFI mode....
View 2 RepliesMultiboot system with Windows 7 on 1st partition and Windows 10 on 2nd partition-same drive. Using the fancy blue Bootmanager Selection screen that comes with win10. Win 10 is the default OS. If I select windows 7 from the bootmanager selection screen the system does a complete bios reboot then goes directly into windows 7. Selecting windows 10 does not do this reboot, just starts win 10 as would be expected. Is this normal?? I have had Multiboot with Win 7 and XP and do not remember this happening.
Win7 partition is marked "Active" (first partition on drive) bootmgr file is on this drive I think
Win10 partition is marked "Inactive" (second partition on drive)
Tried turning off Fast Boot in Win 10 ....
Its annoying and time consuming to go through another complete bios boot up every time I select my Win 7 OS.
I have an old Alienware area 51 which I have upgraded to win10. I have two 500gb sata drives in raid 0 connected via motherboard the raid is via the onboard raid controller. I have installed a new ssd via an add in card. I have installed a clean install of win 10 on the ssd but the bios refuses to boot from this drive it boots from the old drives instead. If the old drives are not connected it boots from the ssd. I can see the ssd as a drive when it boots from the old install. If I select ssd as first boot pirority it still boots from the old raid instead and when I go back into the bios the boot order will be switched around. Wanted to boot with the ssd and leisurely pick through the carcass of the old drives before wiping them eventually.
View 1 RepliesBasically when i go to turn on the PC it turns on and gets stuck on the screen where it tells me to push DEL or f2 to go to the bios settings. The problem with that is it wont let me access the settings at all when i push either of those buttons. So then I turn my PC off and then on again and it boots fine. Then I check for updates to see if it's some bug and I'm up to date. So I restart to see if the problem has been fixed. And it gives me the same frozen screen of the BIOS options. Then i turn it off and it boots fine, wash and repeat.
Build:
CPU- i5 4790k
GPU- MSI GTX 970
MOBO- Asus Z97
RAM- Corsair Vengeance 2X8 GB
PSU- Corsair 650 watt
Memory- Samsung SSD 120GB, Western Digital Black 2 TB
How to update devices with 16GB and EUFI bios ?
It says internal memory is not enough, I even tried using external USB or external but still I can't install Windows 10 Fall update on my new Windows 10 Tablet.
-Intel® Ethernet Controller I210-AS
Msi x99a sli krait edition (flashed n2.0 to n4.0)
Windows 10 64 home edition
System is only a year old.
Flashed bios for updated memory compatibility.
Directly after all works except Internet.
Network controller is now missing (no "other devices", or exclamation point next to device.)
A month ago the wifi card had to be removed to free up pci lanes for an m.2 nvme, so I have no alternative method for Internet access.
Windows sees absolutely no networks or adapters.
Ethernet port is not blinking.
Mobo utility driver disc doesn't see a device to install drivers for.
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
