Laptop Is Stuck In Endless Loop After Hard Reset - Windows Error Recovery
Oct 20, 2015
i was updating my windows 7 to 10. it was updating smoothly but then my father hard reset the laptop and now my laptop is stuck, it goes to the booting menu. then the "windows error recovery" screen, and when i choose "start windows normally" it shows the logo and says "starting windows" and then it just restarts. how do i solve this? this loop has been going on for the last 2 hours.
View 1 Replies
Similar Messages:
Oct 13, 2015
I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.
View 3 Replies
Aug 13, 2015
I recently upgraded to Windows 10 without a problem, but after a while I thought; why not do a clean install? I went ahead and tried to perform a clean install from the windows 10 settings, and chose all drives, and a quick reset.
It then started the process, after which it crashed with a BSOD telling me something went wrong and that it would restart. After that it kept restarting, sometimes with a BSOD, sometimes just freezing on the windows 10 logo. There were different BSOD errors each time it would crash, I can't remember all of them.
Some of them were along the lines of a driver stack overrun, some were telling me system32/winload didn't exist.
We tried a system restore from USB, but there was no difference. We tried going into the BIOS menu, sometimes it worked, sometimes it froze, and we made sure that the USB would be the first the PC would boot from. Still no difference.
At this point the PC just froze on the windows logo, still trying to initialize the system reset I think. I unplugged the drives and plugged them into my laptop to check what was wrong, and both drives were wiped, with nothing left, no hidden files.
Only with both drives unplugged, the PC would give me something different, an error saying that there is no operating system, which is obvious, so I don't think it's the PC, but windows that is generating this problem.
I tried booting from USB multiple times, with a system restore on it, a windows 10 installation on it, and a windows 8.1 installation on it, since that is what my PC started with.
View 3 Replies
Aug 4, 2015
Ok so basically, after successfully installing windows 10 from windows 7, I decided to clean my hard drive and reset windows because I deleted my "edge" and thus my apps were not working. The problem then started, the reset went fine until it reached 64% and read "configuring settings" then it just restarted my PC and went in a loop like this;
>startup
>bios screen (Asus/Intel)
>monitor turns off
>monitor turns back on
>blue win10 logo and loading circle
>black screen for 5-10 secs
>install screen displaying 64%
>restarts and loops
View 7 Replies
Jan 6, 2016
I was given an error message on reboot and followed a guide to editing the registry to restart the download. The download did not restart however, and my windows 10 is stuck in an endless loop of rebooting. I have downloaded a copy of windows 10 and put it onto a USB, but when I try to boot from USB it takes me back to the BIOS. The BIOS are 'Aptio Setup Utility 2011', and don't seem to allow me to change from UEFI boot to LEGACY boot, although the option is apparently there. Why the USB boot is not working correctly and how to make it do so, I am more than happy to reformat the computer but at this moment in time it's useless. The computer is an Alienware x51 from 2011. As previously mentioned the operating system the PC is trying to boot (or install) is windows 10.
View 4 Replies
Aug 26, 2015
I recently upgraded my Windows 7 PC to Windows 10 using Windows Update. The whole process was smooth. I never really ran into any problem. Because the PC is so relatively old, I decided to delete all files and reinstall windows 10 using the windows 10 feature 'Reset This PC' to start fresh and theoretically faster. During the reset when Windows is installing my drivers, I noticed that the screen is plain black - no mouse pointer and the amount of reset finished(in percentage) is not also shown. The screen is just plain black. I am pretty sure that both the monitor and CPU is on. I've tried waiting for atleast an hour. I turned my pc's monitor on and off - nothing happened. So I have to resort to hard reset/reboot coz I cannot really see anything on my screen.
When I turned the power of the CPU back, it gave me the error 'The computer restarted unexpectedly or encountered an unexpected error. To install Windows, click ok to restart the computer and restart the installation'. I pressed OK but after restarting, it gave me the same error over and over again. I tried the solution in this website ( during installation of windows | HERESJAKEN), and it got rid of the error. However, I am stuck yet again in a loop that continues to just restart my PC when they reach the screen that tells you how much of the reset is finished, in my case, im stuck at 64% of the reset. That screen is shown for like merely 2 seconds, then the PC will just restart again, then show the "Reset progress screen" again for 2 seconds then PC will just restart again, over and over. I think the only solution is to start the reset of the PC again, but I dont know how.
View 1 Replies
Aug 1, 2015
My installation is stuck in a reset loop. The Win 10 Ready to Install came up, so I clicked Start and it rebooted, back to the login screen, and then Windows Update came up saying it needed to Restart Now. After a couple of minutes the Win 10 Ready screen comes up again. I've rebooted about 20 times and get to the same point every time.
View 2 Replies
Nov 1, 2015
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
View 9 Replies
Jan 24, 2016
I tried to reset my computer today after 3 years of using it without any sort of re-formatting, and all three times the reset got stuck on 65% before a blue screen appeared and said that an error occurred. It would then give me the options of either:
a) returning back to my windows 10, with nothing changed
b) Trying to reset again
c) advanced options.
I tried the reset 3 times, and after the last try failed I went to advanced options to look at other ways to approach the issue, such as checking if there were any restore points that I could restore to (which there were none).
After that didn't work, I clicked on the first option of just returning back to my windows 10, and that was when it would not start up anymore.
My computer now is stuck on a infinite loop of the launch screen of the ASUS logo, it flashes, then goes onto the second ASUS logo, and this is all it does, go round and round.
I tried to boot it on F8, F9 (the ASUS recovery button), and the 'delete' button. NOTHING WORKS.
I finally tried F2, which led me to the BIOS page? And I clicked on the boot tab and disabled the first boot configuration option, and still to no avail. It returned to looping, and when trying F8, F9, after disabling that BIOS option, and it still won't do anything but loop.
View 1 Replies
Aug 16, 2015
I have a problem, I installed windows 10 and now I'm stuck in a boot loop after attempting a reset to wipe my files in hopes to make things a little faster, and now I'm unable to do anything other than enter the BIOS.
View 1 Replies
Nov 7, 2015
URL... and now its been stuck on a screen that says "Installing Windows" at the top with a percentage and circle in the middle and a note at the bottom that it's installing features and drivers. However, it has been doing this for two full days now. It comes back up at 64%, goes to 100%, restarts, then goes through the same thing. I have a Dell laptop and no error messages come up at any time.
View 1 Replies
Aug 10, 2015
I had a virus in my laptop so I reset my laptop to find that it's stuck in the INACCESIBLE_BOOT_DEVICE loop. I don't have any Windows disk to put into my laptop. My laptop is an Asus g750jx.
View 1 Replies
Jul 4, 2015
Have just installed 10 on a spare drive and installed that drive into my Sandy Bridge and the machine is now going through an endless loop of start up.
I can hear it make some sort of noise as if something wants to go and I have again tried the machine with the old 7 install drive and the same thing is happening.
The other thing is I am not getting a RAM beep or the BIOS to come up on the Gigabyte board (DEL) have jumpered the reset pins for the BIOS but still no BIOS or for that matter any graphics.
View 1 Replies
Jun 17, 2015
Just downloaded the newest update for Windows 10, I was asked to restart my PC to install it, that was over 30 minutes ago, since then my PC reaches the Microsoft logo and under it, it says Preparing Automatic Repair and then it restarts and does that all over again, what am I suppose to do? I can't even get past it.
View 1 Replies
Aug 10, 2015
I recently tried to fresh install Windows 10. I ended up getting stuck in a install loop with the error INCOMPATIBLE_BOOT_DEVICE so I tried to use a USB instead. This resulted in an error saying my USB was formatted in NTFS instead of Fats32 (even though I had just formatted it to be fats32).
My first question would be how to fix this error? Now, while trying to download Windows, I accidentally deleted my Linux partition (woops). My second question is to just delete all partitions on my hard drive and restart from scratch? I'm attempting this on a Lenovo Ideapad y510p.
View 1 Replies
Dec 12, 2015
I am currently unable to get to my desktop. My system appear to be in an endless loop of rebooting. I have tried a lot and no progress. Here's what I tried: Safe modeSafe mode with network(both safe mode bring me back to the endless loop)System repair(can't repair)Restart my computer(well, do nothing)Changing boot priority(do nothing)Let it run for 30 min(nothing)I reached the 3 first option by shutting down my computer 3times to get Windows to the repair option then to advanced settings. I don't have access to another computer.
Here's what it look like: Open my computerShow Bios pageShow blue window logo with a black backgroundShow 1sec a black screenShow a bigger blue window icon telling me it's gonna restartStep 2 to 4 againShow a bigger blue windows icon.
View 1 Replies
Jan 20, 2016
Recently upgraded my Toshiba Satellite NB 10A-laptop from Windows 8.1 to Win 10 and have been logging in via my Hotmail account. Went to settings to set up Local Account, completed the password settings. Then had the choice to Sign Off or Cancel. Chose Sign Off (thinking Cancel would void my new Local Account) and now, for many hours, my laptop is locked into an endless loop of Signing Off.
View 3 Replies
Aug 17, 2015
just got new pc and windows 10 with it when i install the windows and everything finishes and restarts. The pc just boots up back to the installation page. Stuck in loop the dam windows wont start up.
View 1 Replies
Apr 13, 2016
OS - Windows 10 (64 Bit)
RAM - 8gb
CPU - Intel Core i5 3.3Ghz
Vid Card - Nvidia GeForce GTX 570
Yesterday I had deleted a Word document by mistake, so I used System Restore to try and get it back. System Restore told me NOT to turn off the PC whilst it was running, and next thing I know after it got halfway through my PC blue screened and I had to restart. Now every time I load up the PC it does the following...
It loads up to the Windows 10 icon > After a few seconds it says 'Your PC ran into a problem and needs to restart' with the error code 0xc000021a > It then restarts itself but THIS time it tries to start Windows Automatic Repair instead > It then says 'Automatic Repair couldn't repair your PC', and gives me the option to click Restart or Advanced Options. This is where I'm having the most trouble, as the mouse and keyboard don't seem to be working at all on this screen so I can't even click any of the options. It's like the screen has frozen/crashed > The only way off this is to then force a restart using the power button on the PC.
The above just keeps carrying on in a loop every time I turn on the PC now. I still have access to the BIOS where my mouse and keyboard DO work.
View 9 Replies
Aug 11, 2015
I have a acer aspire es1 laptop and i upgraded from 8.1 to 10 and when i switch on my computer from cold boot it loads up but when at the login screen it gives the spinning wheel saying hibernating above it but will not go any further.
View 2 Replies
Sep 8, 2015
I keep getting the "Automatic repair" at boot time and then it diagnoses and later it says it failed.
I've checked several forums now regarding this error, I've tred the following :
1. I tried setting the recoveryenabled to No in using bcdedit. No use.
2. Tried rebulding bcd, No use.
3. Tried resetting by choosing "keep my files" option{Because they are important and I've several programs installed which i don't want to lose).
4. I did chdsk on all drives.
5. Even though I've restore points, it says no restore points found.
View 1 Replies
Jul 31, 2015
Original post [URL] ....
So I force-restarted my computer to hopefully refresh the system but I just got back into the loop. It may be a conflict with some files but for now it's never-ending. What should I do?
View 1 Replies
Feb 20, 2016
So i have 2 hard drives, one new and one beginning to die on me. I have windows on the dying hard drive, and do not have the original disks or product key. I tried using DriveImage XML to copy everything onto the new drive, but for some reason when it boots it says "Hard disk failure" when i have the just the new hard drive in there (i am 100% sure it is plugged in properly). I really dont have the money to buy a new windows disk, and so i was wondering if it would work if i were to factory reset my computer and have windows 10 reinstall on my new hard drive, or is there an easier way?
View 1 Replies
Aug 16, 2015
I upgraded from windows 7 to windows 10. After experiencing some problems I thought the laptop might run faster if I simply reset it. I picked the option to remove all personal files since everything is backed up anyway. After resetting my PC boots up, goes to a blue screen where it says it can't start up with the error "INACCESSABLE_BOOT_DEVICE" then restarts and does this process again.
My laptop has pretty good specs so it should have been running faster than it was and I am now stuck as to what to do.
View 1 Replies
Jun 29, 2015
I have a Windows 10 computer, but whenever I try to turn it on. It just gets stuck on the windows logo. I have tried a recovery USB, but it hangs as well on the windows logo.
When I tried doing an automatic repair, it also hung on the windows logo with Preparing Automatic Repair for hours. I am doing this for my friend, and he doesn't want to loose his important files (yes, i know, he should have backed them up).
View 1 Replies
Aug 18, 2015
So I upgraded to windows 10 but I wanted a clean install of it so i figured a factory reset would do it thinking it would have windows 10. But that was stupid now I have windows 8.1 with no windows 10 icon so my question is will the icon come back so I can upgrade back to windows 10 or am I stuck with the older version?
View 5 Replies