I had installed windows 10 from betas and i have never reached 80 celsius on my laptop. i am measuring my temperatures with speedfan and also tried with hardwaremonitor but the same readings. my laptop fan is running on very low RPM if it is even running, i searched for programs that can control fan speed but without luck. i dont know whats wrong and i want to fix it ASAP because my laptop life is decreasing because of higher temps. my usage is not even that big. i have only 7 chrome tabs opened.
,I have been using Windows 10 and am getting a problem with overheating.when I use VSO convertXtoDVD to do a video conversion which is quite CPU intensive ocassionally Windows 10 will Shut down my Laptop and I never had this problem as much when I was using Windows 7.Could Windows 10 be my problem or do you think it maybe a hardware issue?My Laptop fan is working fine but the laptop is getting quite hot.I ran speedfan after a shutdown and my cpu temps were roughly 56Cfor one core and 57C for the other at idle.I also ran speedfan while using convertX and during the conversion the cpu temps increased to 96C on one core and 97C on the other is this way too hot or should it beable to cope with these temps?
I upgraded from win 7 ultimate to win 10 pro, but then downgraded back to 7 because my HP laptop was overheating all the time.
My problem is that the WIFI show connected with internet access, but I can't open any website or do any download (tried many browsers, the wifi is workin on my phone, and the driver is installed and rechecked, and did troubleshooting).
I have a Toshiba Laptop with an AMD processor, 4gb Ram, 500 Gig hard drive with 366gb free. It is running very slow. I have over 70 processes running. I'm pretty sure I don't need that many but I don't know what is needed and what is not. I've tried to copy the list but can't figure out how to do it. I'm using open office.
Ever since i updated my laptop to windows 10, the fan has been running on full speed and i am not running anything intensive (just Firefox), task manager shows some Microsoft background task host and i really don't want to change back to 8.1.
So after i upgraded to Windows 10 i noticed my Computer was running slower. I hoped it will become better after a while but so far nothing improved, i also noticed that starting the PC up takes forever.
But the real problem is that it keeps Crashing due to overheating when trying to play a game. I used to play the game on Ultra-settings with firefox in the background no problem on Win7 but now it crashes even when nothing else is running and the game is set to low.
I updated to Windows 10 using the direct method (downloading the file from Microsoft's site rather than waiting for the update in my bottom right corner). Since I've updated, my computer has begun to drastically overheat; the simplest things such as unplugging and walking around with it will cause it to stutter and freeze for sometimes up to 5 minutes straight.
Both the Windows 10 laptop and the Windows Vista laptop have discovery on and file and printer sharing on. The printer is connected to the Windows Vista laptop. The Windows Vista laptop can see the files within the Windows 10 laptop. The Windows 10 laptop can see the Windows Vista computer but as soon as it tries to see inside it gives an error about "spelling of the name, etc." If using the diagnosis tool it says "One or more network protocols are missing from this computer". "Resolving problems as administrator" does not solve anything.
hard disk of a laptop with windows 10 used as external USB drive to another laptop and it workded but there are some problems that display is poor and shows windows is not activated but in my previous samsung laptop it was activated when i downloaded it freely from Microsoft. Other things are going smoothly till now.
I have a laptop running Windows 7 that is connected to a printer. I am connected to the internet using a WiFi connection. I have a homegroup called workgroup. My wife has a laptop running Windows 7, connects to the internet using the same WiFi modem and prints using the printer on my laptop.
I downloaded Windows 10 on to my Windows 7 laptop and all of a sudden my wife can't print anymore. Microsoft, you've done it again. How I hate this!
I fooled around with HomeGroup settings on the Windows 10 laptop and the system attributes on my wife's laptop and now I can see her computer on my Windows 10 system. But I cannot see the printer on my system from her laptop.
I tried to click on my compueter from her laptop and I get a request for username and password. I don't know what username and password to use. I gather from reading the forum that I should put the name of my laptop in the username but I don't know where to look for the password.
I have noticed this problem come up on my Dell 7537 (Check out my profile for details) when I close the lid to put the computer to sleep, the HDD light turns off, but the fan continues to run, even after several hours. When I open the lid back up, it is just a black screen where I have to hold the power button to do a hard reset. The same thing happens with initiating a shutdown sequence, although that one only does it some of the time.
I've just downloaded my Windows 10 upgrade and can't send mail through Outlook 13. On a forum I was told to run the sfc command but when I tried, I was told that I'm not an administrator. Mine is the only account on my PC, so surely I must be.
I use a 120gb ssd on W10 build 10547 and always get rid of Windows old files for earlier builds. When I add up all the space used when C drive is opened in a new window, it comes to 31gb. Trouble is that the disk has actually 88.2gb used, confirmed also by Partition wizard. AMD uses 2gb, docs/downloads 9gb, windows 14gb, recovery 5gb, 32/64 programs 1gb, it really should be a slim system.
I usually do a "synchronize folders" within Total Commander for doing a differential copy of regular applications I download and use.
Anyway, I have found out that TC insists on some files being "different" or "changed" after I have ran them. I have found out w10 "automatically sets" current date and time to the executable file after it has been run. Is this normal? Or is it Windows Defender who does it?
None of my windows apps is running if i run xbox or groove music or something it says it has been blocked by the administrator. please contact your admin for more info. How is it possible i am the only admin!!! also in start menu where we click on our name to sign our do something else, there it shows another account named as Administrator. I never created that account!!
This is very strange, but for some unknown reason Windows 10 will not let me open some programs (e.g. file explorer, task manager, chrome. But, it will let me open Word, Excel and Edge. When I go to shut it down it just keeps running and running. It is almost like some App has taken over part of the system and won't let go. I have let it run for 4 hours and it never shut down. Obviously I have to disconnect the power cord and do a hard boot to get it back.
For the last couple of days, when automatically running Facebook of of my START apps list, after Facebook opens for a while it just cancels out without any warning. No problems before this. However, if I run Facebook thru the Internet after signing "ON", no problem. I uninstalled the Facebook from START and re-installed it from Windows Store and it installed with no problem. However, when I try to run it automatically from START, the same happens. It runs for a while, and whenever it feels like, it just kicks me out and cancels. As I stated above, this has only been happening the last two days.
Every time when I open CodeBlocks the task manager shows CodeBlocks running in the second plan. How can I change and back CodeBlocks run normally in my pc?
For some reason, ever since i built my computer back in late 2014, it has been going very slow. Programs take awhile to start up and the initial boot takes about 5-7 minutes. However, all the games I play run very well. I actually overclock both my CPU and GPU with low temps. My specs are as follows:
GPU: AMD Gigabyte R9 270 w/ 2gigs vRAM CPU: AMD FX 6300 OC'd to 4.0GHz RAM: 8gigs of 1333MHz DDR3 Motherboard: Gigabyte GA-970A-DS3P PSU: Sentey 725w
Edit: I forgot to mention that the USB 3.0 ports rarely work. This has been a problem ever since I got the mobo. I will probably just call Gigabyte at some point if no is able to figure that out
I've got 8GB RAM and while I was playing XCOM 2 with no other apps running (except for what's running near the clock, AV, Firewall, Steam, etc) and awhile playing windows gave me an error stating that Windows is Low on Memory and it shut down XCOM 2.
I upgraded from Win7 to Win10 when 10 was made available. I run 4GB RAM, A core2 6700 2.66 cpu, 64 bit, Comodo Firewall, spyware & antivirus. I did not notice this constant running of the HD using Win 7 with the same software.It seems something is demanding constant harddrive use at or near 100% much of the time. Some of the time there is such a demand the HD seems to be screaming for mercy.
I have checked for viruses, trojans, spyware and disk errors with nothing foundI use both online and offline malware check systems... nothing is ever found. I like the layout of the new Windows but I do not like all the demands it makes on the HD & CPU when I am trying to use it. Task MGR indicates CPU and HD usage is high usually above 30 percent for CPU & above 90% for HD.
I recently installed Windows 10, the FULL VERSION, not the Technical ISO, and ever since then, Battlefield 4 has been running significantly worse on my computer. I don't know if it is just the operating system or what, but I am running a 980 ti with an i5 4670k cpu and I can definitely say that it was smoother on Windows 7. I am playing with everything on ultra settings at 1080p.