This happening right after i instal 10 on my laptop. Its about 5-10 mins after my laptop sleep then its shut down automatically.. And i believe there is nothing problem with power & sleep settings.
View 1 Replies
1. My PC no longer shuts down. It starts to shut down but then never turns off. I have to hold down the power button to turn it off. Really weird.
2. When my PC goes into sleep mode it will no longer wake up. I've pressed every button on the keyboard but nothing wakes it up. The only way to get it back on is to hold down the power button to switch it off, then switch it back on again.
3. Now that Edge has replaced Explorer, I'm having trouble with some websites and also there's an issue with Java. Windows 10 removed Explorer but when I've tried to download it I get the message:
Looking for Internet Explorer? You're in the right place, but Internet Explorer requires a Windows PC.
Well, I do have a Windows PC!
i am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 RepliesSo, just like the title says, my PC keeps waking after I put it to sleep mode. It probably takes around 10-15 minutes of being in sleep before it wakes up. The reason I'm posting this question is because I have looked up solutions for this and they don't appear to be working.
I've checked my device manager; only my keyboard and mouse are enabled to wake my PC. I ran, powercfg -devicequery wake_armed, in my command prompt to make sure that only my keyboard and mouse are the only devices.
I disabled wake timers in the power options and ran, powercfg -waketimers, to see if there's waketimers. There aren't any.
I also ran, powercfg -lastwake, after my computer woke up automatically. I didn't take a picture of it but it said ther was a wake history count of 1 but it didn't state what was the source of it waking. I thought that was strange so I put it to sleep then woke it up with my mouse. Checked again with that command prompt and this time it specified the source which was my mouse obviously.
OS: Windows 10
My computer won't go into sleep mode automatically. Even when I manually set it to sleep, it will be awake again within 10 minutes or so. I've gone into the advanced power options to make sure that nothing is interrupting it while sleeping and set it so nothing could wake it up. I've checked in the device manager to make sure none of my devices are waking it up.
After it wakes up I'll go into the command prompt and use the "powercfg -lastwake" to see what could be causing it and nothing shows up. There are even times when the computer will turn itself on from being completely turned off.
I have a Dell laptop with Windows 10 on it. When it goes into sleep mode, if I swipe the touch pad within a few seconds it will come out of sleep mode. However if I'm not at the computer so that it is in sleep mode for a while, then when I swipe the touch to pad wake it up sometimes it will wake up but sometimes it won't. If it won't wake up then I have to use the power switch to shut it off and reboot it.
View 5 RepliesWhen I close the lid of my laptop, put it into sleep mode, or put it into hibernation mode, the laptop basically shuts down. The power light flashes on and off, but when I reopen the lid or press the power button to turn it back on, the screen flashes grey and reboots.
What I have tried:
Changing all of the advanced power options
Resetting my laptop (to before the issue started occurring)
Restoring my laptop to factory settings
Redownloading windows 10
Disabling the UEFI (BIOS) setting that allows the computer to be turned off to save power
Updating the drivers that were suggested on the windows eight forums
Downloading the chipset driver from Asus
Downloading the ACHI Link Power Management and trying all the settings
What I've done in the command prompt:sfc /scannow then Dism /Online /Cleanup-Image /RestoreHealth.I also tried the chkdsk command but there were no problems found
When I started noticing the problem:After I downloaded VMware's player and created a virtual computer with Ubunt
My Laptop( HP Pavilion 17 ) with 10586 build go to Hibernation from Sleep Mode.
I change the Power Options, but problem is not fix:
My current settings:
Just installed Win10 on my 4 yr old HP G60535D. Now I have have to re-boot everytime I shut the lid. Played around with power settings, etc etc but no luck. When I first open the lid, I can hear the computer running, a slight mechanical burp of some sort, then nothing... totally blank screen. I have to hold the power button down to shut it off, then re-boot. A 1st world problem for sure, but kind of irritating.
View 5 RepliesHow can I fix the sleep function for an HP laptop using Windows 10? After it goes into sleep mode, it won't wake-up. Have to cold boot to restart.
View 2 RepliesLaptop does not wake up from sleep when either power button, keyboard buttons or mouse touchpad are pressed. A forced reboot is always required. HDD light off, monitor stays black and battery light and fan still on.
Have had this problem for over a week since downloading and using Advanced SystemCare and Driver Booster. Once the problem occured I uninstalled them but nothing changed. Also there was a few recent windows updates at beginning of March but haven't read anywhere that they are causing similar problems. Have tried the obvious fixes but nothing seems to work.
SPECS
Asus X555LA
Windows 10 Home
Intel® HD Graphics Family
BIOS version date 14/08/14
I have a new Toshiba C55-C5241 Laptop, which came pre-loaded with Windows 10. (See Specs)
I clean installed Windows 10 last weekend. All went very well. I just started loading programs this weekend.
I started noticing the blue screen stops yesterday. These happen coming out of Sleep. I probably never would have noticed these before because I was not leaving the machine alone long enough for it to go into Sleep. So unfortunately I do not know when the behavior started - from the beginning or after some software installation.
Here are my reports: SCULLY-Sun_08_30_2015__64736_97.zip
Blue screens are mostly "Kernal Data Inpage Error" and the more serious "Critical Process Died", both I understand to be processor related.
I did not have the presence of mind to test or check any of this early on. But I do have images of the original factory installation and of the fresh, clean install (before any customization or software installs). I do not believe that I ever tried Sleep Mode on the original factory installation.
The stops happen very consistently when on battery power, less so when plugged in. For a while I thought they did not occur when plugged in - this was not the case. They seem to be more consistent when manually going into sleep, not so much when it goes into sleep from Power Settings.
All of the drivers in the clean install were the same as the drivers in the factory installation (at the time I finished). I did not turn off automatic driver update for a few days. I will check the driver list for changes later.
Software installed (in order) : Avast!, Firefox, Office 2010 (H&S), Nitro Reader, VLC (64 bit), Handy Address Book (a prog I've been using for years), Malwarebytes, CCleaner (never run), and Winamp. I am thinking of restoring the clean install image today (start over). Just to see if the behavior started then.
My desktop ignores the settings in Power Options and automatically goes to sleep. I have made sure that all of the advanced settings are set to Never. In the screen saver settings, it reverts back to 2 minutes after I apply the changes. Also, editing the value for ScreenSaveTimeOut found in location HKCUControl PanelDesktop from 120 to say, 3600, has no effect and reverts after refreshing. Deleting the key altogether also has no effect.
View 1 RepliesSo, recently I left my computer on overnight to download something, I did this multiple times before with windows 7, and everything went smooth. This time I woke up and my computer was turned off, but I live alone, so nobody could have turned it off. I turned it on again to finish the download and went on doing something else. After that, my computer turned off again. I already went into the settings and sleep is not on, and the screen also doesn't turn off. I also went into advanced settings, and I still can't find anything to be causing it.
View 1 RepliesMy machine will go into hibernate mode, but will not go into sleep mode. I just want to be able to wake it with the touch of the mouse.
View 1 RepliesI seem to be having problems where my PC wont sleep after 30mins as its set to.
View 2 RepliesI had problem dual booting win7 and win10. After many attempts I was able to dual boot.
But in the process, I deleted "system reserved" partition. So windows want start. I performed start up repair and it solved the problem. After that I reinstalled win7 ultimate which create "system reserved" partition again.
But the problem is hardware wan't shut down, hibernate or sleep. Windows shut down properly, but hardware remains active. I have to hard shut down it by pressing button.
Laptop model: HCL ME ICON L 1015
System Event log:
critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
I have Windows 1 on my Dell Inspiron 11 3000 series. A few days ago I took a quiz for one of my online classes and have to use Respondus Lock Down Browser, which I have not had any problems with in the past. However, after I X'ed out of my start bar at the bottom disappeared so I had to restart it. Well once I did and got the bar back when I go to click the power symbol to select shut down only a blank box shows up. I was hoping it'd go back to normal but it hasn't. So in order to select shut down I have to click Ctrl Alt Delete and click the power button option at the bottom left there in order to see the Shut Down, Sleep and Hibernate options.
View 1 RepliesI have updated my desk top with no problems and have set it to sleep after an hour, however it still goes to sleep after 10 minutes. It then sits with the blue sign on screen with no account pic or sign in box for ages before going to a blue screen which flickers for a few seconds before giving me the sign in options. I have tried adjusting all the power saver options to no avail!
View 5 RepliesWhen I walk away from my computer, I want it to go to sleep in 20 minutes. Sometimes I return after an hour, and the computer is still awake. There's obviously a rat in the woodpile here. Some software is changing my sleep setting from 20 minutes to "Never" without my permission. Sometimes it will sleep normally for a day or 2, then suddenly something resets my sleep time to "Never".
Is there a way I can block this activity, or re-set it to the proper 20 minute setting on each startup?BTW, I had the same problem in WIn7 and Win8. I was hoping it would be fixed in Win10. It has not.
Ever since install..all 3 pc's have been acting weird....won't sleep or shut down properly, random crashes, go away 30 min. and when I come back, all my icons are huge...???? and just now my Desk Top just powered off and it's completely DEAD!!!. No lights on the MB, nothing. It's like it's a goner....Since this pc prior to W10, ran flawlessly.
View 4 RepliesAfter upgrading to Windows 10, my PC will not go to sleep automatically nor will the displays turn off after the specified time (10 minutes). If I put it to sleep manually from the Start menu, it will go to sleep and usually stays that way until manually woken up. I had no issues with my PC going to sleep in Windows 7.
So far I've tried:
Unchecking "Allow this device to wake the computer" on my NIC
Disabling password required when the PC wakes up (saw it on another thread so figured I'd try it)Updating all drivers (chipset, graphics, etc)Updating my motherboard's BIOS
Disconnecting my keyboard and mouse
Checking powercfg /requests (its blank - everything is none)
It is fitting that I should start this discussion on the new Win10 site. With the latest update to 9926, I finally got the sleep menu to show up (updating the graphics driver) but the computer will not automatically go to sleep at the appropriate time. The other versions worked. I doubt this will last as I expect more updates to fix this but so far, the usual suspects have been tried and it is non functioning.
The sleep button and the power button set to sleep work fine. So far, nothing has woken it up but I have a sneaky suspicion that Homegroup now wakes up the computer when another machine asks for its shared folders.
i am having a strange issue with my windows 10 pro version, It was working fine until the 3rd cumulative update. Now my lap never goes to sleep. When i sleep the laptop it goes to sleep and then automatically wake after 30 to 40 sec, and sometimes even 4 to 5 minutes. I have troubleshooted the power option, removed all the scheduled events but nothing works. On searching the command prompt with powercfg lastwake command it shows The POWER BUTTON.
View 2 RepliesI set my computer to sleep after 25 minutes, and it worked until the day before yesterday. Since then it just doesn't go sleep automatically but I can put it into sleep mode manually. I guess I might installed something that doesn't let it sleep. But I only installed Origin in the last days, and it's not even running.
View 1 RepliesI recently had an update on my windows 10, on 3/14/16, and after that my laptop would not shut down, it will either stay on the shut down screen, or the screen turn off, but the laptop will be on, as well as the fan. I have tried different things to fix this but it won't work.
View 7 Replies
