I changed the settings on 'netplwiz', and made the account 'Homegroupuser$' an administrator, and removed the administrator privileges for the account i use. now i cant access any administrative settings.
View 1 RepliesI am currently on a different computer than the one where I am locked out of the Administrator account.
Less than 3 weeks ago, I bought a new laptop that came with Windows 10 installed. When I finally set up the new laptop and tried out Windows 10 for the first time, I was annoyed at the whole thing with Windows blocking some programs from being installed and a lot of other annoying prompts. This is when I found out about a higher level of Administrator access known as a Super Administrator to avoid most of these prompts, and install programs without being blocked by Windows. So what I did created a new user account with the Command Prompt and gave it Super Administrator access without setting a password. Once I logged into my new user account, I deleted all of the other user accounts on my computer, since I had no need for the other user accounts (such as the Guest account).
The real trouble happened when my computer crashed and experienced a BSOD. After the computer rebooted from the BSOD, I found out that I could not log into the Administrator account because it prompts for a password, but I never set up a password for the account. Inputting no password does not work. I am not sure how a password was set up on the Administrator account without my knowledge and whether this might have been related to my BSOD crash.
I have made an attempt to get back into my only user account, but nothing has worked so far. All of the built-in Windows diagnostic tools have failed to work, since they all require that I log into the Administrator account, which I am unable to do. My original plan was to use the option to reset my PC that lets me keep my files, but that won't work without having access to the Administrator account. What password is on my Administrator account considering that I never set up a password and somehow the account now has a password on it. How to get back into my Administrator account?
I installed Windows 10 from Windows 7, and now I can't open Settings using my account (which is an administrator account). I apparently have to use a different account, but I don't have one, and with no access to Settings, I can't make another account. I tried booting into Safe Mode, but I couldn't create an account there, either -- I clicked "create new user in PC settings" (or something along those lines), but nothing happened.
View 5 RepliesRecently I had to make a change in my computer that required the Elevated Administrator account to be used. I finally figured out how to open that account, did my thing, shut down the Elevated Administrator account, and returned to my standard account. Then I discovered that I must have done something else while in Elevated Administrator mode because after that I could not install or uninstall any program, could Not access System Configuration, could Not access Safe Mode (used the shutdown /r /o command. When I got to the selection window and pressed F4 I waited for 45 minutes with no Safe Mode result), cmd -> "run as administrator" does not work. When using the GUI to work on this (open Elevated Administrator) I get "To continue, type an administrator password, and then click Yes." But there is no place for a password and the Yes button is not active. When I use the command prompt I get an Error 5 message.
View 9 RepliesI would like to use some of the features that require you to log in with a Microsoft account rather than my own local administrator account. But when I did that, it totally changed my settings for my local account including desktop, etc. So I deleted the Microsoft account. how to keep my local account settings when signing in with a Microsoft account.
View 9 RepliesSo the other day I noticed my only account on my laptop had lost administrator privileges. I looked up how to fix this and went about doing. I booted into "safe mode with command prompt" but that realized I didnt need that, just regular safe mode. I turned off my laptop, and turned it back on expecting a normal boot.
When it boots up, it goes straight to the windows login screen for "administrator". No matter how many times I hit ok it doesnt do anything or will start to load but eventually come back with, "account has been disabled. Please see system administrator". As of right now, that's all I can do with my laptop, so its pretty much useless to me. Is there a way to boot into safe mode using the power button or holding an F# key?
I downloaded Windows 10 and created a Microsoft account. I wrote down the password. The next day a log in screen appeared (which I never had before) so I tried to log in. My password didn't work. I tried everything. I called Microsoft and filled out a form and emailed it in. They Told me I have two step verification and they would have to download a program to my computer and I will lose all my software.
View 9 RepliesI recently downloaded Windows 10. For some reason, my account on the computer --which is the only account on the computer-- is a 'standard account'. Because of this, I can't download or make some important changes that I need to make. I admit that I'm not computer savvy, but I've tried a few things. I've tried activating the 'hidden' Windows 10 administrator password but I can't because you have to run the cmd as an administrator to do this [when I try it doesn't give me the option to click yes]. I also tried adding family members to my account in order to make those accounts administrators. I created new email addresses, send the invitation, and accepted the invitations, but every time I log on to my Microsoft account, it still states that they invitations are pending.
View 2 Repliesmy son has deleted the master administrator accounts on my laptop and I am unable to restore the accounts.
How do I get the Windows 10 to reinstall the Operating system and recover the accounts?
No I cannot do it via restore or refresh as you need administrator facilities to perform these tasks.
I have been running windows 10 for a while now, without any BSOD whatsoever. About a month ago I added a new account and made it my administrator account, then changed the privilege on my original account to standard user account. No issues in doing so. I have been successful, in the past, in switching back and forth from admin to user accts with no problems. Today, though I logged into the admin account to do some updates. But after about 1 to 2 minutes into logging onto it, I get the BSOD with the error bad_pool_caller. The only thing that I had recently done was to install the beta version of Malwarebytes anti-ransomware (last night). The first thing that I did after getting these crashes was to uninstall that program. Unfortunately, that did not fix the problem (or was not the problem, I'm guessing). When I am logged into the standard user account I can run all day with no BSOD. I don't know any correlations between the admin account and the BSOD other than maybe there are some drivers it is looking for? Every time it crashes it says that it is collecting data before closing down. I went ahead and downloaded the dm_log_collector file and am submitting it.
View 2 RepliesI got 2 new computers with Windows 10. When I tried using one computer and somehow I just keyed my email and password and thereafter every time i start my computer i had to key in the password. I then wrongly deleted the administrator account. Now i cant restore the administrator account. I have tried everything suggested on the net. If I have to reinstall windows 10 to solve the problem
View 1 RepliesSo I upgraded my Windows 7 to 10 a few weeks ago and have been loving it. Decided to upgrade my parents computer to it as well yesterday. When my mom wanted to play a Free Cell game they were asking me to log into a hotmail account. They only have an Aol email account. Figure I'd sign into mine really quick and that would be the last I'd heard of it. Unfortunately now the computer associates a random hotmail account of mine that I have lying around as their main "administrator" account. What's worse, now they need to use my password whenever they turn the computer now.
That's really silly How do I delete my administrator hotmail account from their computer? I don't want them to deal with having to remember a password for an account I rarely use myself. Its their computer, not mine.
As the subject line says, how can i get my sons account off his old computer that was upgraded to Windows 10 and change it to my parents info. We will be giving them my sons old computer.
View 3 RepliesI have purchased a laptop from a friend. Just prior to my purchase Windows 10 got loaded. The compter has one account which is an administrator account. I think that the same account information is used as a login to Microsoft. I would like to remove the account and substitute my own administrator account. How do I do that.
View 2 RepliesAfter I had installed Windows 10, I restored some backup files I had from another computer using Windows 7. When I tried to access the files, I was told that none of my software could load the files. After doing some research on several of the Windows forums, I found out the account I had been using from the very beginning was not the "real" Administrator account. As such, I could not change any of the User Privileges. Research again indicated I needed to "activate" the EUC Administrator, which I did.
However, I was never asked for a Password when it was activated. Now, when I try to access the new Administrator account, I can't get past the Logon screen as I do not have a password. I have tried ALL the passwords I can remember from both the current Windows 7 and 10 User/Administrator accounts on this and the other computer, all to no avail. HOW do I either determine what the "default" password is or how do I change the "default" password without knowing what is in the system right now?
I found my computer updating itself, and it said I would be excited about the new updates. Well now when I click my calculator it says that it cannot be used in my Administrator Account and it asks me to sign in again with another Account. It was working before in my Administrator Account, why not now?
To say the least, I am NOT excited about this at all. Is there anything that I can do to get it working again? I tried right clicking it to see if I could open it with my Administrator, but nothing was there for me to do that with.
I am logged in to Windows 10 Pro as an Administrator. The operating system refuses to allow me to unzip an executable file to a folder on my C Drive failing because an Administrator account is required. It does not give me the option to provide my password to authorize the process. This problem surfaced when I did the free upgrade from Windows 7 to Windows 10 late last year. I found search results info suggesting that an embedded manifest embedded in the file may be involved. I can't find a folder where I am allowed to unzip the file.
View 1 RepliesWhen I "upgraded" to Windows 10, apparently I set up everything on the local administrator account. When I went to set up a separate account yesterday it disabled me from getting onto the administrator account, which is where I have everything set up. When I go to log in, both accounts are on the log-in screen but it won't take the passwords for the administrator account, which I know are correct and it even gives me the right hints but won't accept the pw. It says, "Your password was changed on a different device and you must sign in to this device once with your new password and then you can sign in with your new PIN. Well, I haven't added any devices, just a new local account. I really need to get back into the administrator account since that is where everything is. I've done the prompt, CMD, net user administrator /active:yes and it just denies access obviously because I am logged in as an administrator.
View 2 RepliesWindows is frustratingly taking up all of my time and I have tried everything google has to offer to try and fix it but it seems like no one has screwed up as much as I have on whatever forum.I'm trying to set my account to administrator because I can't install programs, change account settings, make any changes through CMD without getting the system error 5 access denied message and I can't set the administrator account through CMD either. I also don't have the permission to change anything in regedit and I can't even reset my pc because it requires an administrator password which I don't have, is not "nothing" nor is it administrator or admin or password and I can't change it through cmd either.I can't even access the administrator account because it is disabled and even with an elevated cmd I can't activate the "hidden" administrator account.
View 9 RepliesI had upgraded to Windows from windows 8.1 to windows 10. When I was on windows 8.1, I enabled built-in Administrator account and that is the only user which has the admin privileges.
But after upgrading to windows 10 that built in Administrator is disabled and none of the users are having admin privileges. Now what is the way to get admin privileges on one of the users or get the built-in Admin user enabled?
I have purchased a used Asus laptop that already has Win 10 installed on it from the original owner. All of the settings on the computer are linked to that owner's Microsoft account and administrator account. Is there a way for me to change the administrator information to my Microsoft account and email? I can log in using the old owner's password to access the administrator account, but I don't see any way to change the account to my information. If I create a new user account and make it an administrator account, when I log in using the new account, there is no access to any of the apps I need from the original account.
View 2 RepliesUpgraded to W10 from W7 several months ago now and activated and used only the built-in Administrator account. Which is what I have done for many years now to stop the UAC popups.
However, I have soon discovered this Administrator account, while blocking the UAC popups has some serious limitations. Like cannot run Edge or any of the Metro Apps. Yes, I have tried the workarounds but they too have issues.
So how can I transferred all my settings for my programs and windows to another local username?
When ever i turned my Pc on its showing invalid username/password...Its getting in to a user account for which i dont know the passwpord....its hidden administrator account i think once i tried that in command prompt,,,,,
i have tried various steps like
1:in command prompt i used net user administrator /active:no it shows "system error 5 occured "
2:i tried REGEDIT there when i open the SAM file is shows this user is already in use
how to fix this.
I have always used the hidden administrator account by default since about 10 minutes after I installed windows on my own PC for first time.
It's ridiculous how limited one is without it and I consider it a must-have feature for day-to-day operation within windows - especially true within the freaky, controlling environment of Windows 10.
Anyway... It doesn't work in W10... I can enable it as usual via an elevated command and can log-in to it just fine... but Windows doesn't seem to care either way and constantly asks me to provide administrative permission for silly things like renaming a shortcut... (sigh).
I am also getting far to many "You don't have permission" sort of errors that make me want to throw my PC out of the window.
I believe the account is enabled and I am using it exclusively...
I have 2 user accounts as previous before upgrading to win10, user account opens and works perfect, the main administrator account after logging in, the taskbar commences flashing and oscillating preventing me choosing i.e. Microsoft edge or chrome etc.
View 1 RepliesWhen I first converted from Win 7, Win 10 transferred my main ACCT: Patrick
But, the boot time became so elongated, the net gave me some tips but to so, I had to use SAFE BOOT. But the old F8 would not work so I used the MSCONFIG. But, then Win 10 CREATED a new account using my email and password I had for Microsoft Live web site, DELETED MY OLD PATRICK AND REAL ADMIN ACCT. It took considerable time to figure the PW it was looking for.
So went back to regular boot, renamed the EMAIL name to the original PATRICK acct as it had been deleted,
They did give me ADMIN rights but that rarely works when you do some heavy lifting.
This leaves me with ONE ACCT, PATRICK with ADMIN RIGHTS, not with full ADMIN privileges.
So, lets create a REAL Admin account.
Net says: in DOS mode, net user administrator /active:yes
Wrong, access denied
tried: net user patrick /active:yes
Wrong, access denied
When I was converted, it converted the Home Premium to Home.
How to CREATE a REAL ADMIN on "Home"?