Yesterday while checking things on here I ran msconfig for the first time. I found that selective startup was checked off. Not something I set so win 10 must have set it when I installed it. Now what reason would this be for?
View 4 Replies1. If I try to select normal startup in msconfig.exe, it doesn't stick; always reverts to selective startup.
2. When I boot to the Windows 10 desktop, it always opens a Windows Explorer window at /windows/system/ which shows only a Speech folder in the right panel.
3. Checking my BootManager using BCDEdit, I see this but I don't understand what the entries mean or whether any of them are connected to the problems 1 and/or 2:
Code:
C:Windowssystem32>bcdeditWindows Boot Manager--------------------identifier {bootmgr}
device partition=C:description Windows Boot Managerlocale en-USinherit {globalsettings}
default {current}resumeobject {657a150b-658d-11e5-99b6-8e17c296bef1}
displayorder {current}toolsdisplayorder {memdiag}timeout 30Windows Boot Loader
[Code]....
I have noticed in my fresh clean install of Windows 10 Pro, when running MSCONFIG that my system is set to Selective startup. If I select Normal startup and click Apply, it immediately defaults back to Selective startup again.
I also notice that one service under the Services tab is not selected - Geolocation Service. Here too, when I select it and click Apply, the check box is cleared again.
I have not disabled any start up programs. Only thing I did was uninstall MS Apps Get Office and Get Skype.
I was instructed to use Selective Startup to get Quicken installed (didn't work), and now I can't get out!
This is a laptop that has been stuck with the Microsoft account login (cannot fix it as other options are grayed out). I cannot login with my Microsoft login (says password is wrong), but I can get in using just the Admin. acct., with same password.
Using Admin. acct., I cannot get out of Selective Startup, most items are grayed out, or if I can select options (Enable from Disabled), then I get an error that things cannot be changed.
My Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've tried to change it but it continues to be the same "selective Startup". This makes me uncomfortable cause possible future problems.
View 8 RepliesI am trying to determine why Firefox takes 20 seconds to open. This does not happen in Safe Mode so presumably another package is causing the delay. Consequently, I wanted to start in diagnostics mode. However, as soon as I click on the button for Diagnostics startup, the blue rotating circle appears next to the mouse pointer and never advances. I checked in Services and found the Diagnostics Host Service is not running and cannot be started.
View 9 RepliesI know how to turn off/on the "USB selective suspend setting". I actually don't mind that it is enabled however what I find annoying is when my external 'wakes', a window pops up showing all of my files on the external as if I just plugged it in for the first time. Is it possible to stop this popup window?
In Windows 8 when I plugged something in for the first time, I got a popup asking what I wanted to do with it. I didn't get that option with W10 ...
everytime i change the settings in there it wont let me save it even when i mark the make all the boot settings permanent. im using windows 10 i wanna change the maximum memory to 8192 which now is 0 and cant hide all microsoft services .
View 1 RepliesI was doing a selective startup from msconfig to test something, and restarted. After that I tried changing back to normal startup and it wouldn't work. It is not saving any of my settings either.
View 1 RepliesAny easy way to access msconfig in windows 10? I got the download. It wants to disable some apps at start up but I haven't a clue as to how without msconfig.
View 4 RepliesNot able to open device manager, disc management or any of those administrative tools. Main thing is that I'm getting a runtime error every time I try to open msconfig.
Runtime error!
C:windowssystem32msconfig.exe
This application has requested the Runtime to terminate it in an unusual way.
Running Windows 10 build 10532
Windows Defender is shown both running AND disabled. I have no third-party security or firewall.
I am unable to select this service here (msconfig)-(but rightly set as 'Automatic' in services.msc) nor am I able to set Normal Startup: on applying, all changes are cancelled.
I must have removed some needed startup program or app...?
HOWEVER, Windows Defender DOES start on boot and all is swell. No log errors except for Cortana, which is broke and shows a registry error, but that is another question, I think. In case it is not, here's the log:
Activation of app Microsoft.Windows.Cortana_cw5n1h2txyewy!CortanaUI failed with error: Invalid value for registry See the Microsoft-Windows-TWinUI/Operational log for additional information.
I tried to boot into safe mode via msconfig then after restarts it showed BAD_POOL_HEADER and PAGE_FAULT_IN_NONPAGED_AREA. I've tried chkdsk and system recover. I don't want to Reset my laptop. S
View 1 RepliesI tried to pin a desktop shortcut of msconfig system app as tile to the start metro screen but refuses to pin. It doesn't even exists 'Pin to Start screen' selection when i right click the shortcut. What should i do? I even copied the shortcut to the 'All Apps' folder and appeared on the left to the up and down app list but i can't drag to start screen as tile.
View 9 RepliesI have the very latest Build of Windows 10 Pro, but recently I have experienced problems with my PC’s general performance – I therefore decided to Run msconfig to then uncheck some 3rd party programs under services within the System Configuration Hiding All window services first.
What is happening is that when I disable all and then go about checking the 3rd party progs one by one, the 1st attempt to tick one of the programmes the system config freezes. I have to then reboot the PC but the same thing happens if I try and attempt to do this again.
if I try the same thing but booting within Safe mode the PC does not freeze – so my question is .. can this action only be carried out in Safe mode ??
I have searched the internet for a few days now but cannot come up with an answer to this .. if you are supposed to be able to do this under normal windows start up then I have a big problem with my OS but if this is a procedure that can only be carried out within safe mode then all is well.
Attached Files : Pic.jpg 61.71KB
I can't make it Windows 10....
View 6 RepliesI have three entries (among others) that are slated to startup when I logon. Each of them are featured twice in the start up tab of program manager.
On checking with autoruns I found that they occurred twice in the registry under
HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun
and
HKLMSOFTWAREWow6432NodeMicrosoftWindowsCurrentVersionRun 14-12-2015 02:23
Is this normal?
My laptop is running windows 10 64 bit.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
I'm unable to boot the computer. An Automatic Repair screen runs, then a Diagnosing PC screen. The Repair/Diagnosis fails and I end up on a blue screen that says the problem couldn't be diagnosed and provides options to "Restart Computer" (which just leads into the same loop) or "Advanced Options." I hit "Advanced Options", then "Troubleshoot", then another "Advanced Options", then "Startup Settings" (on this screen there are also options for "Reset System", "Restore Previous Build" and others, all of which failed), then "Restart".
It routed back to the same blue screen "Your PC did not start correctly".
I don't have any startup disk. Do not have other pc to download software.
When I tried to reset the PC, was prompted "There was a problem resetting your PC. No changes were made."
As soon as the start button is initiated, I receive a message saying " Error loading OS"What can I do to have the system start normally?
View 1 RepliesWindows 10. logitech K120 keyboard. How to set num lock to be on at startup. With win8.1 num lock was always on at startup
View 2 Repliesnum lock turns off at shut down
View 7 RepliesOnce every day after first start up my pc decides to reboot, and it seems to be quite random at which time it reboots. Can be just when I enter windows or after 20 minutes. Then the power goes back on for a sec and it tries to start but then in an instant reboots again and then it runs fine for the rest of the day. I have not done extensive testing on different components and since I dont get a BSOD I dont really know where to start and since it only happens once a day I can only test one solution every day .
View 1 RepliesIs there a way to disable the on screen keyboard on startup?
I don't need it on my desktops or my Surface pro...
Upgraded to Win 10 a couple of months ago on Toshiba laptop. All was well until about 3 weeks or so ago, after an OS update. Windows will still startup to the desktop however a couple of seconds after the desktop screen appears, the default browser (Firefox in this case but did not matter which one is checked as default - have Edge, Chrome and FireFox) opens to an MSN homepage. Not really a HUGE problem as I can click and close it out but it is just an annoying issue. Have been virtually everywhere in the system and cannot find anything that will stop this. Have checked plugins, searched for malware, looked at task and startup manager and can find nothing that will stop.
View 3 Replies