I don't see in the Mail App how to change the ports.
I'd need to change the SMTP port to 26 (not standard but my mail server is configured this way).
I know an e-mail client like Outlook or Thunderbird would allow it but this is not what I need at the moment.
The only option I found was SSL or no SSL, but I did not find how to pick the actual port.
I can't get my Outlook 2016 (windows 10 on a dell pc) to send my emails. I am receiving without problems. error message just says cannot connect with my outgoing smtp server. have been on the phone with my service provider, my internet provider, microsoft support and Office 365 support with no resolution I've tried the sfc /scannow with no resolution. It's working on my iMac with the Mail app just fine ...
View 4 RepliesUpgraded to W10 on Surface Pro3 and it seems Outlook 2013 SMTP emails failing to send. emails send OK on other devices and all OK via Outlook web.
When testing the setting in Outlook test email send OK but when going back into the email account email fails to send with following error:
Task 'email address' - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' Used different network connections with no success.
I've looked and looked and cannot find a way to change default font and size in the mail app. Is there a way or registry hack or what???
View 2 RepliesCan I on windows 10 mobile change the location of my mails from built in memory to the SD card? I'm using a Lumia 1320 with just 8Gb built in and my mails drain mi space complitly, so I wonder (and how) to have my mails on my SD card?
View 1 RepliesI am using a new W10 laptop, with newly-installed software for controlling a telescope. This requires a USB-Serial adapter, which I have used successfully with W7 on an earlier machine. Now I cannot configure the COM ports. I get the message "Device (or COM Port) does not exist". I have tried setting the COM port in Device Manager to all numbers from 1 to 15, but with the same results.
View 6 RepliesI have been using Windows Live Mail for years and have 3 email accounts synced in it. After some recent changes to my PC, the program is suddenly very slow to change between email folders. What I mean specifically is if I click on one inbox, and then click on my deleted folder, there is literally a 5 second delay before the view is switched to the new folder. This has never happened before, it normally take mere milliseconds to change between my email folders. Switching between any folders at all, even if they are empty, takes 5 seconds!!
As for the changes made to my pc, I recently was screwing around with my drive partitions and made a really stupid mistake. I accidentally created a new volume which took up my whole secondary HDD (not my OS drive, but where my emails are stored). Some quick google searching got me a free software that recovered my partitions and after a quick reboot my PC appeared to be working fine again. Except for Windows Live Mail... which when I opened had lost all my email accounts. I re-added them, and for some reason they started to download all my emails from the internet and wouldn't recognize the mail folders where all my emails are stored on my secondary hard drive.
It took over an hour to download all the emails again, which were stored in the default location on my OS drive. I normally keep them on a secondary HDD to save space on my OS SSD, so I was forced to delete all the emails on my secondary HDD where I normally keep them and then direct Windows Live Mail to move all the emails it had just downloaded to the location I just deleted my emails from.
So at the end of the day I made a really dumb mistake, fixed it, and then had to do this weird workaround solution to get my email storage working the way I am used to. All this screwing around now when I use my email it is super slow to switch between folders...
I have already tried doing a full defrag of the drive where my email is stored, as well as a repair of windows live essentials from the control panel. I have heard that addons can cause problems like this in WLM but until today I didn't even know WLM had addons. What I can do before I try reinstalling Windows Live Mail. If I do that I will have to re-download all my emails again...
I mistakenly chose IE as the browser for my emails to open in when I imported my mails from outlook and I wish to change this to MS Edge. How to I go about this? I've checked in the settings, but it doesn't seem to have what I'm looking for. MY IE doesn't function as well as Edge and I'd like to correct this.
View 2 RepliesLast night I have updated my laptop (Alienware mx17r3) to Win 10 Tech build 10041, updated all my drivers now my display port is not working, When booting I can see it showing BIOS and post screen but once I am in windows just goes dead with a msg no display port detected. Running my laptop screen, dell ultrasharp-u2913wm (Display port) and dell S2340L (VGA) port. On VGA both screen works fine no problem but as soon as I try running on display port dead as a doornail. I checked device manager its not even detecting the 3rd screen. Have updated latest drives from intel and ran windows update but to no avail.
View 1 RepliesSince installing windows 10 I can't use USB....
View 1 RepliesSo I bought a new monitor, the MG279Q and tried plugging it in to my PC via displayport, the monitor comes with a DP->miniDP cable, (from GTX780 DP to monitors miniDP) and the monitor gives no signal. However the computer does recognize the monitor and for example gives the sound alarm for new device attached. I can also see the device describes as "Generic pnp monitor" and I can see it in the Windows's own control panel for monitor + the nvidia control panel (pics in the end). But it won't allow me to set the monitor to use..
I suspected that the cable might be broken so I tested it with my UX32LN (GeForce 840M) laptop which has a miniDP. I plugged it to the monitor (from laptops miniDP to monitors normal DP, the monitor has both DP and mDP) and wow, image straight away. So the cable should be fine I guess.. But this is somewhat of an different situation as I use different port in the monitor compared to my desktops GTX780. And I don't have other computers or gadgets that I could use to test the monitors miniDP port.
Next I plugged in the monitor via HDMI to my desktop and that worked just fine. It recognizes the monitor without problems. Using my old XL2411Z monitor with DVI + MG279Q with DP or the MG279Q with HDMI+DP at the same time I can see the MG279Q being connected twice but it only chooses the HDMI connection and doesn't let me change it to DP even though it shows the connection.
Here are some pics to explain it better:
Multiple panel settings window. It shows the MG279Q on the top (under GTX780 the one not clicked) but it won't let me click it to use. Sometimes it lets me tick it for a second but instantly ticks the box off. The monitor nro 2 is the MG279Q via HDMI.
Surround+PhysX window shows that I've connected the monitor via DP but it is greyed out. It also won't let me make a surround set with the Xl2411z + mg279q DP.
Changing resolution settings only displays the HDMI connected monitor.
So I tried uninstalling the Nvidia drivers + freshly installing them, did not work at all. Neither did uninstalling the generic pnp monitor so the computer would reinstall the displays drivers. I also freshly installed from Win7 Pro -> Win 10 Pro and no difference (was intended to do that later on anyway so I thought that I might check, my laptop is running Win10 and it's DP worked after all). I also went to BIOS and checked that iGPU is disabled + monitor setting is set to PCIE instead of auto, no use. I would also test the GTX780's DP on other desktop computer but I can't. Anyway I'm somewhat suspecting a software/hardware compatibility issue as the monitor is being recognized. Doubt the fact that the monitors miniDP or my graphics cards DP port is broken..
What should I do or try? I really want to run the monitor via DP so I can utilize the 144Hz refresh rate.
Tech specs:
PC: P8Z68-V PRO/GEN3 (bios v3202) + i7 2700K, GTX 780 DC2 (vbios 80.80.21.00.AS04), 4x4GB 1600Mhz DDR3, AX 760 PSU, Win10 Pro
Monitor(s): MG279Q + XL2411Z
Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 RepliesAfter the cumulative update on 30 Aug 2015 WiFi isn't working... Even if I connect to Ethernet port it is not recognising. What to do
View 5 RepliesLenovo USB port replicator to work with a DVI monitor attached? I can't get win 10 to recognize that another monitor is attached.
View 1 RepliesOk so I have a wireless Bluetooth device. It has worked fine connected to a windows 7 and 8 computer. Now I am trying it on 10. For the software I wrote for it to work properly I need to be able to specify which COM port it uses when connecting.
In windows 7 and 8 I would then go to "Bluetooth settings", click "New Connection", and then follow the setup wizard. Here I would be able to set the device to be in Dev mode and specify the COM port to always use. In the new windows 10 "Bluetooth settings" program I can not find a way to do this.
Also I have two different "Bluetooth settings" programs show up in the start menu. One I can open up and it will show my device, but I am unable to do what I mentioned above. The other program with this name has the same icon as what is on my Windows 7 and 8 machines, but gives me the error "unable to start correctly (0xc000007b)"
I'm using a current Intel NUC (NUC5i3RYH) running Windows 10 Home x64.
I have this infuriating problem which may be related to the hardware but may also possibly be fixed in the OS. I've had no success so far changing power and sleep settings in the BIOS and Device Manager. I've had no luck with Intel directly.
The symptom is that any (of two different) USB TV tuners I use seems to lose the quality of signal anything from 20 minutes to an hour after I access that channel. If I change channel and then return straight back it instantly fixes it.
any registry or other settings I could try? Alternatively some utility or task I could use to poll or wakeup the port periodically? I'm just lost on this and have spent over a month off and on trying to work out ways of making it work.
when i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all.
i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date.
I have some home automation software (HomeSeer) running on a W10 machine on my network that has a web interface running on port 8080. I want to access this from other machines on the network. I couldn't access it by default so I created an inbound rule on Windows Firewall for TCP port 8080. But it still won't connect from other machines on the network. I know the problem is on the host W10 machine because when I temporarily turn off the firewall on that machine I can access the web interface from the other machines. For the rule I tried private only, and private+public+domain, and same result.
View 5 RepliesI just wanted to ask if it was bad that i had my HDD connected to a eSATA (Asmedia) port when installing my OS? I just tried switching the port from the eSATA ports to the regular SATA ports but it gives me BSOD saying "Inaccesible_Boot_Device". So i just plugged them back in eSATA ports.
View 1 RepliesHow to use power from USB port while it goes to standby/suspend mode. When I go to device manager- USB root hub- right click - properties -power management tab, the option "allow this device to wake computer" is inactive. But "allow this computer to turn off this device to save power" is active and unticked.
View 2 RepliesJust unboxed my computer from CyberpowerPC, GTX 720 graphics card, installed/updated all drivers with drivereasy (paid for just now) and I am still having the issue with HDMI port not working. I have tried to plug into a monitor and a TV, neither are working, I have also tried to use multiple HDMI cables, still does not work. My monitor has an auto-switch source availability and turned on, when I plug my computer into the monitor with HDMI it continually cycles, finds no signal and goes into sleep mode. Then rinse/repeats until I either turn off the computer, monitor or just unplug the monitor from the computer. Currently I am using a DVI(computer) to HDMI (tv) and its working fine. So I know its the port on the computer. Do I need to contact CyberpowerPC to send the computer back to get this issue resolved?
View 7 Repliesafter upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 RepliesAfter I upgraded to Win 10, Audacity came up with the error message, 'Internal PortAudio error' Or something like that, and the microphone won't work.
View 1 RepliesEvery time I restart or boot up my PC with my monitors turned on first I always get a issue with the monitor connected to the HDMI port, it always says "Input not supported" and all I do is turn my monitor off then back on and the issue has been resolved...
GPU: GTX 650
I tested the internal HDD with CrystalDiskMark and was able to get 109 MBPS both on sequential read and write tests. Then, when I tested my 1 TB WD My Passport USB 3.0 External HDD with CrystalDiskMark the sequential read and write speed did not exceed 40 MBPS the few times I tried. Got similar 30-40 MBPS speed when transferring movies from external HDD to internal HDD.So far, I have tried updating the external HDD and USB 3.0 Controller drivers. Tried with 'USB selective suspend setting' disabled (Under Power Plan Options). Also tried with write caching enabled. But havent been able to solve the issue.My laptop is running Win 10 Home 64-Bit. I am sure I used the USB 3.0 port. And, I used the USB 3.0 cable supplied with the external HDD. I don't have another USB 3.0 device so cannot figure out whether the issue is with my laptop of the external HDD.'
View 4 RepliesSo, instead of using my browser for my emails I set them up in Windows Mail, but although it will show all the folders it won't show anything in my inboxes. I've tried syncing but to no avail.
View 1 Replies