I was just creating a folder on my C drive (SSD) when I noticed that the attribute is set to read-only. I've tried clearing the attribute many ways using the link below but to no avail. Right-clicking on the folder does not show the option to Take Ownership. how to correct it?
Remove read-only attribute from folder - Windows 8.1
All my emails, saved, unread and all the folders i created in my mail are gone....
View 1 Replies Since I have upgraded to Windows 10 Pro, I noticed that all my folders' attributes are read only . Even if I create new folders, they are read only on creation. When I try to remove the read only attribute in the folder properties, it looks like it's removed, but when I check it again, it shows that it's read only. I tried other methods, like diskpart, and tried to take ownership of the folders
Is there any way to fix this problem? I can create new files and modify existing files in the folders without any problem, but it's really annoying, for example Steam says it can't install games and updates, because the folder what I choose to install games is in read only mode, the only solution is to run it as an administrator. I need to run almost every program as an admin, to make them usable, or they report problems with read only folders. The OS itself is up to date.
When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
Got caught by this sneaky Windows 10 downloading to my laptop. This download created a new partition on my harddrive as a protected system drive. I have tried to take ownership of this new partition with no success, I have tried to restore to a previous date with no success - it fails. How I can remove this partition from my hdd?
View 1 RepliesJust shrank my boot system "E" drive slightly, now how do I move the new volume into the "C" drive?
View 9 RepliesOK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
I clean installed Win 10 RTM version on my laptop a few weeks ago. I have a basic GPT setup.
Installation went fine, however the installer created a 'Recovery' drive (D with a size of 600 MB (262 MB free) & a 'Local Disk' drive (E with a size of 451 MB (128 MB free).
I am stumped as to why it assigned letters to them. If you see the attachment of a snapshot of Partition Wizard, you will be able to see the setup.
My question, besides why the assigned letters is the where the status is listed as 'None'. Is it safe to delete these?? I am assuming that the only partitions i need to keep are the 'ESP', which is 'Active & Boot' - so it is needed to be able to boot into Windows. How about the one listed as 'Other' - the capacity is 128 MB & all 128 MB are used - do i save this one as well?
I really wanted a less cluttered setup - so when all these partitions were created, particularly 'D' & 'E', i was perplexed as to why they were created.
I installed Win10 recently on my PC.
When I try to save to local C drive (Documents) I get an error:
"SAVE AS ... You don't have permission to modify files in this network location. Contact the administrator per [sic] permission to make these changes."
I have looked at the C drive and can see no obvious issues, e.g. 'read only' is not set.
Recently, I connected a new SSD as a USB drive. It shows "Write Protected" in windows 10. However, same one if I connect to Windows 8.1, then the write protection is not there. Can not do driver update under windows 10 as it is write protected.
View 2 RepliesI have a program that I wanted to install into my Win 10 Pro Machine (64 Bit) and have found that the disk can not be read by the DVD/CD-ROM Drive. I also tried it in another Windows 10 Computer (64 Bit) and it also can't read the disk.The disk worked fine under Windows 7, in both the same computers. The drive works as it reads other CD/DVD's.
The disk is good as it works perfect in an other Windows 7 (32 Bit) and Vista computers (32 Bit). Computer is up to date with builds etc.
Since I upgraded to windows10 I am unable to watch movies from a DVD. I can read other kinds of disks just fine, just not movies. For instance, I wanted to watch the sixth Harry Potter movie. So I enter my DVD but my laptop just says there is no disk entered. I thought there was something wrong with my DVD at first. But it works fine in all other devices I have at home. So then I thought the problem must be my disk drive. But then I inserted the bonus DVD of the movie, and this one worked fine. WHAT? How is this even possible, both are DVD's, just the bonus disk doesn't have a movie on it. I tried this with all the harry potter movies we have at home and the same occurred each time, the movie DVD does not work but the bonus DVD (with behind the scenes and whatever) works fine. I have searched all over the internet and haven't found a solution. The only thing I find is people of which their Disk Drive isn't found anymore. But this is not my problem.
P.S.: It's a laptop, the details can be found on my profile I believe. And I wasn't really sure in which thread I should post this. As it isn't really a hardware problem, I don't think it's a driver problem (my pc says drivers are up to date) so I assumed it must be a software problem.
I am using am iMac with Bootcamp running Win 7. I have just upgraded to Win 10 with no problems. Except I can now not read my 2 x WD USB external drives. I am getting "the parameter is incorrect" error. In disk management it says the drives are active but RAW. If I connect the 2 drives to any other machine either Win 7 or 10 they are fine, so no fault with the drives. These 2 drives have always been used on the PC in question when running Win 7.
I have tried changing the drive names etc but still cannot read.
My only solution may be to connect the drives to another PC, back up, then format the drives?
Is there any simple way to synchronize folders on the same drive? On two different drives on same PC? On two different networked PCs?
View 1 RepliesI successfully transferred all my files and data from my old computer (windows 7) to my new computer which uses Windows 10,using "laplink". It placed all the files in "one drive". I set up a local account initially rather than a Microsoft account. So far so good. I then wanted to change my local account to a Microsoft account, which proved somewhat difficult. I ended up creating a new Microsoft account for myself, so I have now got 2 accounts for myself-one local and one Microsoft. In the Microsoft account, however, when I look into file explorer I seem to have lost about 95% of the files I transferred from my old computer. The folders are there but when I click on them it says "folder empty". I would eventually like to delete the local account but am afraid if I do so I may lose most of my photogrphs and music files.
View 10 RepliesI have decided to migrate to Win10 while maintaining my Win7 system until I'm sure (on the same box). Win 10 is installed on a new SSD, Win7 on an old SSD, with all my files held on a 1TB drive so I planned to just save any files I needed, like brower shortcuts on the storage drive.
In Win 10 I have had no issues viewing the files on this drive until today. I have a simple text file for storing information about the migration, and I can open it, but only see an old version of the file. It is fine in Win7. New files and folders I create in Win7 are not visible in Win10 at all now. What am I missing given all the old files created in Win7 are working fine?
E.G. If I boot into Windows 7 and create a folder on the root of the storage drive, called test, then boot into Windows 10 from my other SSD not only can't I see the test folder, I can create a folder named test. I've not booted into Win7 yet to see if I can see that from there.
I have a few Windows 10 systems with clean installs (not upgraded) whose C: drives are filling up with random hex named folders; over 50K of them. From what I have read, this could be related to temporary update folders, but they are not being deleted. The folders are named something like "00b332a3dcbf71fb88" and contain 0K of data, but they are extremely annoying.
What these folders could be and if there is a way to either stop these folders from appearing or at minimum, to redirect them to another location not on the root of the C: drive? If these are related to Windows updates, I will not be able to shut those off as these systems are all part of a group policy that keeps them on. I can shut down that policy, but prefer not to have to do that.
I'm trying to access my user folder on a different hard drive, but it takes forever to load and then afterwards does nothing. I think I've already set all the permissions and stuff but it still isn't working.
View 10 RepliesI recently got an SSD, with my old HDD set as a storage. I was trying to move the quick navigation folders on the left of Windows Explorer from the SSD to the D: drive (HDD).
However, with the 'My Music' shortcut, I accidently moved it to just the D: drive, rather than a folder within the D: Drive. This means the 'My Music' now directs me to straight to the D: drive, and when I try and move it, Windows says access is denied.
I plugged in the hard drive from my wife's PC into my own PC (both windows 10) so I could try to recover some files from it (as it's currently not booting into windows).As soon as I booted my PC back up I could see the second hard drive was there but since then I've been experiencing all sorts of issues. I am still an administrator but I just don't seem to be able to do anything - it's hard to describe, but I can't move or change or delete ANY files or folders on my system, I can't move files to or from an external drive for back up, on the desktop the right click menu doesn't come up at all and on files/folders it has no ability to access properties.
Also, whilst most programs still open normally, any Microsoft Office programs just don't do anything at all when clicked on. It's as if I have lost all control over making any changes on my PC.I assumed that the two drives were conflicting in some way so removed the second drive but the problems are still there.
I backup photos from my phone to Google Photos which then automatically syncs them to my hard drive to a folder in Google Drive. The folder containing these images in Google Drive has been included in the Pictures library, but the Photos app doesn't see them and says "No readable photos, videos or folders found." I tried uninstalling and reinstalling the Photos app. The pictures show up fine in Windows Photo Gallery. Does the Photos app has always ignored images in Google Drive or is this a recent development?
View 5 RepliesHow to restore these folders to their original drive after they were moved during sysprep...
View 2 RepliesI have an app which refuses to start and I cannot delete it from the Windows Start Screen (the option when I right click the icon isn't there).Is there a way I can manually remove it so I can reload it from the App store?I've tried going into the registry and deleting all references but some of them are locked.
View 1 RepliesAs my desktop PC (like a lot of I suspect other PC's) doesn't have built in GPS, it means that whenever Windows 10 tries to automatically determine where am I (for example, when I'm looking at the built in map client, or Cortana is finding something nearby) it actually thinks I'm around 70 miles away.
Is there any way to manually set my actual location more accurately in Windows 10?
I'd like to perform a manual revert to Windows 7.An elderly client accidentally upgraded what I believe was Windows 7 Home to Windows 10. This was within the last week, and Windows.OLD is still there, but “Go back to Windows 7” is not an option.
(Yes, he was the only user, and he was an admin. For some reason, Windows 10 says it's the Pro edition now. I don't know why. I don't understand why “Go back to Windows 7” isn't present. Client doesn't know what he did, nor what options he selected along the way. Yes, a clean reinstall could be done, but returning to the old setup saves about four hours of other reinstalls and setups.)
Microsoft has a KB971760 "How to restore a Windows 7-based computer to a previous Windows installation by using the Windows.old folder".I'd like to confirm that this same process would work from Windows 10 to Windows 7.
I used the Compatibility Troubleshooter and now I cannot select a compatibility mode manually or turn it off completely. Those options are grayed out.
View 1 Replies
