I have upgraded to Windows 10 and it's activated. Now I want to do a clean install using the "media creation tool", but I'm not sure if it's going to affect my C drive only or all the partitions. And also, should I just reset the PC from the recovery option in the settings?
View 2 RepliesI plan on doing a clean install. My question is do I still need to upgrade to windows 10 first or can I just enter the windows 7 key during the clean install of windows 10?
View 9 RepliesIn July I downloaded the Media Creation tool and created an USB version of the 29th release. I then used it to upgrade 2 pcs successfully. Now, I think I want to do a 'clean install' on a new ssd on another machine. Can I to I clean install with that USB? Seems to me I would have to have a product key or something like that to do an install on the blank ssd. If so where would I get one?
View 5 RepliesI am currently running Win7 Ultimate service pack 1 and am trying to create an installation of Win10 on a flash drive before I replace some parts inside my PC that will require an OS refresh. Unfortunately I am stuck at this screen.
I am sure my OS version is activated and I have extracted my windows key via Magical Jelly Bean finder but it rejected that key.
P.S. any PC stats linked to this account are a different piece of hardware
The Media Creation Tool will NOT run at all on my Windows 7 Ultimate desktop and my Lenovo Yoga 2 Pro with Windows 8.1. When I try to run it, nothing happens after clicking the message that allows it run. I know it does not start immediately but I have successfully run it on two other PCs with Windows 8.1. I've spent the better part of the last four days trying to get the Windows 10 upgrade installed on my desktop.
After starting the "tool", I've even let the PC sit overnight to see if it would ever start to run. It never does. I've rebooted numerous times and I've also tried running it from that PC, from a network drive and from a USB drive ("Run as Administrator" does NOT work either). Nothing works. I was able to create both a USB and DVD setup disk using the Media Creation Tool on a different Windows 7 Ultimate PC so I've also tried using both of those options to upgrade my desktop PC. If I boot from either the USB drive or the DVD, I can install a new copy of Windows 10 but, of course, cannot enter a product key that works so that does not work.
However, if I boot normally and then run Windows 10 setup.exe from either the USB or DVD, it does NOT run at all (just like with the Media Creation Tool). For a brief moment the other day, I thought I might have found the problem... I forget that I was starting to run low on disk space on that SSD. It was down to 21.6Gb available which, I think, should have been enough disk space but it might be borderline.
So I did manage to get the free disk space to more 50Gb. That, however, did NOT work at all. I've tried about every possible scenario multiple times and have gotten nowhere over the last four days. I even tried Microsoft chat support yesterday but started off with 454 people in front. I wasn't in front of my computer when my turn finally arrived -- so I missed it. Haven't tried it again but don't expect much from that anyway.
When you use the creation tool and enter the type os system etc. and it creates either a USB or a DVD is the file that you receive close to the latest ISO?
View 4 RepliesI seem to be unable to launch the media creation tool. Everytime I try to run the .exe (even in safe mode or as an administrator) after I get the UAC dialog nothing happens.
I don't get any kind of error dialog or even see the program or process in my task manager.
Im trying to do a clean install of the latest update for w10 pro but the media creation tool wont give an option for pro edition.How do I create media for pro edition or can I get the ISO somewhere ?
View 24 RepliesWhat can I do now that most troubleshooters in Windows 10 won't work since I think most of them are not available for Windows 10 It worked completely fine for me when I had Windows 7.
The Media Creation Tool is corrupted for me now that I am using Windows 10 but I want to clean reinstall Windows 10 with the Media Creation Tool.
trying to update by media creation tool downloaded ok and created iso dvd. on running i cannot keep personal files and apps it says
you cannot keep windows setting, personal files and apps because you have chosen to install windows 10 using a different language to the one you're currently using.
Trying to get the latest ISO with "Sp1 (I know its not called that)" already on there. I downloaded the media creation tool it errors out when selecting create a USB boot drive and when I download the ISO and try to burn that I get "Cannot read into from ISO file" - There is no where I can download a straight .ISO from Microsoft without going through this media creation tool !?
View 1 RepliesSo I ran the media creation tool and instead of choosing to upgrade this PC, I chose to write it to a USB stick so that I could do the upgrade at my leisure. So, I spent the time to download the 3 or 4 GB (we have super slow internet here) and put let it write to the USB stick. I then rebooted to the USB stick but there is no "upgrade" option and it asks me for a W10 product key.
Do I really need to run the media creation tool all over again and re-download that 4GB this time choosing Upgrade this PC or is there a way to run the W10 installer from the bootable USB flash drive that I've already got and do an upgrade instead of what it seems it's going to do a fresh install only from the USB drive.
When Windows 10 first came out I was easily able to create a 32-bit/64-bit hybrid install on a flash drive using Media Creation Tool. I now want to create one for my dad who is having trouble getting his system updated but can't find this tool anymore, only the individual ISO's for 32-bit or 64-bit. Did MS take down this tool? Is there somewhere else I can get it?
View 9 RepliesI downloaded the ISO using Ms's creation tool -- I selected create ISO.
After the download it prompted me to burn to a DVD -- I didn't want that because I was going to use rufus to create a number of USB sticks so I exited the program.
Now I can't find the ISO
Before you answer this i would also like to know if there is any way to upgrade from windows 7 enterprise? If there isnt can you tell me why this wont move its been on 0% for 2 hours now!
View 4 RepliesAfter reading an article in PC World, I decided to use the Media Creation Tool to create an ISO version of Win 10 on a USB drive. I downloaded the tool and ran it. All was well during the Win 10 download and download verification. The program then moved on to setup the USB when the terribly informative message appeared..."SOMETHING HAPPENED". THAT'S IT!!! Upon which the program terminates. I repeated the process once with the same results.
View 13 RepliesMy laptop was upgraded to Windows 10 two days ago but my desktop has not received the green light yet. I was reading that if you downloaded the Media Creation Tool from Microsoft's web site that it had an option that would allow up to upgrade your PC or create an ISO install disk. I downloaded the app on my laptop and created an ISO disk as a backup in case I need to do a clean install on that platform but when I tried to run the app on my desktop it brings up the UAC prompt asking if I want to run this program and when I click Yes, nothing happens.
I read some thread somewhere that if you're having problems with this app you need to do a selective startup where you don't run any startups and you disable all of the services and after restarting, I tried this and after restarting my PC running the Media Creation app again failed to do anything .
If I run Windows Update it says I have no updates pending but it was interesting that every time I've run the Media Creation Tool it puts an entry in my update log that says the update failed. The fact is the upgrade has not failed in the normal sense only the Media Creation Tool failed.
My concern is that I have a reservation for the upgrade but that too might fail so I'd like to get my desktop upgraded to Windows 10 asap.
Here is the problem, im trying to use the media creation tool to download the W10 iso, boot from a dvd and do a clean install, deleting all my data.
But the media creation tool seems to not be downloading a thing. for exalmple, i setup /Desktop as the download folder, but when it finishes, there is nothing downloaded. i've tried refreshing and a lot of stuff, but there is nothing. and it gets even worst.
Look at this sreenshots:
The file doesnt even allows to get deleted, it says it does not exist. The same to any change i try to do to the file.
I've tried lots of times, and lots of things. I dont know that to do, i really need to clean-up my pc, the same things happens when i try to download it to a usb flash drive.
I am trying to create a bootable OS for a newly built pc with the windows 10 media creation tool, but after I click all the settings I get an error saying: "there was a problem running this tool" with an error code of: 0x800704DD - 0x90016..I would like to know if this is an error on my part or the creation tools part
View 1 RepliesWhen using the Media Creation Tool from Microsoft what is the size of the ISO that is created for X64 Windows Pro? The one I created is smaller than one I created from the install.esd file. The size I see is 3.10 GB (3,333,357,568 bytes). Can that be right?
View 8 RepliesDoes the Media Creation Tool create a bootable USB or DVD. If not how can I make it bootable?
View 3 RepliesCurrently I installed Windows 10 Pro build 10586.0 from my USB flash drive created from the Media Creation Tool (MCT).My question is, I noticed that Microsoft has recently updated the MCT to the latest build.Before I decide to put this latest build onto my USB flash drive using the MCT, do I need to reformat my USB or will the MCT do the whole process for me by overwriting all the current Win 10 boot and setup files that were on my USB?So right now, I have all the Windows 10 bootable files created from the MCT, but the build that I have on there now is 10586.0.
So if I decide to create another Win 10 bootable USB using the MCT (Build 10586.36 or higher), will the MCT do all the reformatting automatically or do I need to manually reformat my USB myself before running the MCT?
I've just upgraded to Windows 10 and am currently trying to create a installation USB to carry out a clean install.
Twice now it has reached 100% and closed without any trace of the download on the USB flash drive i've chosen.
Do I need to format the drive in particular way?
Im currently trying to install windows 10 onto my pc but my C drive is only left with 13gb of space. How do i change the download location to other drives?
View 1 RepliesSo recently Windows 10 came out and I manually downloaded the Media Creation tool and started upgrading my PC BUT I had to turn it off and all of the data that it downloaded has taken up my small amount of space in my SSD (I only have 16 GB left) where does this tool store all of it's data so I could delete it.
View 9 RepliesI am in the same boat as a lot of people in these threads and unfortunately, Windows 10 is not automatically installing. I've downloaded the Media Creation Tool (x64) and have my original Windows 7 Product Key, but is there any specific disadvantage to installing with the tool instead of waiting for my reserved copy?
For instance, will I forfeit my reservation for a complete, free copy of Windows 10? Will I not receive a decades worth of updates?