After I free upgraded from 8.1 to 10 a new partition showed up. I just deleted it and it became unallocated space.
How can I merge this space with my primary partition. Both are on a 256 SSD.
When I right click C: in disk management, the extend volume choice is grayed.
Until recently, I ran a dual boot system with Ubuntu - but for business reasons, I uninstalled it (along with it's bootloader). Anyway, I cleared up the hard drive space in the Disk Management app on windows 10, I have about 350GB free space from Ubuntu and I cannot extend the C: partition, you can see what I mean here
I can't seem to extend my partition and whatever program I use I have to buy the full version to extend my partition,
I had 2 useless partitions, one at the very beginning of my HD and the second at the very end. My setup is GPT Basic btw.
I would like to know, using MiniTool Partition Wizard version 9.1, if it is possible to merge these former partitions (now 'unallocated' space) into the Windows partition (C??
I right clicked on both of the unallocated space 'partitions' but any operations (namely, move) was greyed out.
I would like to clean up the disk layout (even if we are talking about only 1 GB. of space)
I just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
For various reasons I decided to completely format my hard drive and partitions when installing windows 10, to give it a clean start.Now when I'm in windows 10 I have 2 drives, at 465gb each and a third one with 40mbs allocated as Dell Utilities and 930gb of unallocated space. No matter what I try I cannot link that unallocated space to anything. Even trying to create a simple volume out of it falls down by saying "the size of the extent is less than the minimum". I've tried extending my existing drives and using it but it throws up the same error or something about not enough space.
View 1 RepliesI installed Windows 10 on a new PC, with OS on Samsung 950 PRO. For data disk, at this stage, I use a Samsung 840 PRO which I transferred from my old 8.1 PC.
The data disk now shows in diskmanagment 351MB unallocated space, and 119 GB NTFS Healthy (Primary Partition).
How can I reclaim the 351MB unallocated to get maximum capacity of the data disk?
Maybe this a standard case of repartitioning, but I am not familiar with that and do not know how to do it.
Is it advisable to leave some of the hard disk space, say 1 GB or 2GB or ...... unallocated. Is there any benefit or harm.
View 7 RepliesInteresting start to the weekend with Friday evening booting up my pc to find that Thursdays overnight update had left my partition drive unallocated. Read around for a few hours and found that reinstalling my acronis virtual disk driver would be the way to go. All seemed well and then there was another windows update and again the beyond the 2TB partition was gone. This time there is no fix with reinstalling the virtual disk driver and I don't want to mess around and wipe the perfectly good partition that Windows 10 has decided is not a fan of.
View 1 RepliesI just performed an upgrade from win 7-64 to Win 10. I had a 128GB SSD with the OS installed and a 4TB Seagate drive broke into two partitions- F and H drives at 2TB each. These were both application partitions only. After the upgrade, only one partition showed up (F) and the (H) is gone. The F drive now shows 1.6TB of unallocated space which I assume was the H drive. Drive manager doesn't let me do anything with it.
View 1 RepliesNoticed this #2 partition, (128MB), on my lappy, is it serving any purpose? Best way to include it in the C: partition
View 9 RepliesI have four primary partitions (System, C: , D: , E: ) and some free space in my Win10 laptop. Now, I want to make create an extended partition which will hold C, D & E as logical partition. How can I do it without loosing data (i don't have a spare hard disk where I can backup the data).
View 6 RepliesSo I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
Anyway, a while ago, I was playing with booting installations from a HDD, which worked, but now it seems I'm stuck with the partition I used to store the installation on.
So I have two questions:
1. To delete the H partition, I need to first set the C one to active, correct?
2. Is it even safe to delete the partition since it's a "system" partition?
The H partition is empty as far as general files go, but since it's bootale, it always shows up as a boot option, which is mildly annoying.
Image: [URL] ....
Need to make a ext4 logical partition but it is allowing only primary:
View 9 RepliesThis has suddenly happened, explorer is missing the 'space' information from the display.
The build up to this was simply creating a Windows disk image using W10's own utility. Mysteriously the space bar on the problem partition showed some usage, about 1.7Gb but nothing could be found in the partition. I've even tried deleting the partition in Disk Management and reassigning a drive letter but nothing gets the display back.
So, I've had this 1Tb HDD lying around unused, so I had the bright idea of shoving it in place of my Dell Latitude E6410's original 640Gb HDD, use that in place of the old 60Gb HDD on my T60 (a mere 60Gbs just weren't enough to accommodate my Google Drive - running on Linux with InSync - and Mega cloud storage), and put my latest W10 Pro system image on the 1Tb in the E6410.
All well and good so far - except when I checked the partitions after I reinstalled the system image from the original 640Gb, this is what I got:
Which wasn't too surprising, given how Windows works. What I wanted to do was to expand C: into all that extra unallocated space, but as you can see, the recovery partition is in the way. I wouldn't be too surprised, either, if there was no workaround that doesn't involve reinstalling Windows.
I have a 120 gig solid state hard drive, that I have my OS installed on (Windows 10)
I was going to install windows 7 on a second partition on that hard drive, so I shrank the current partition and it gave me unallocated space.
I had a few people tell me it wasn't possible to install windows 7 on the same hard drive as windows 10... for some reason or another.
So I decided to expand the partition back to its original size (the whole hard drive).
Before I shrunk the partition.. I had 60 gigs left, I shrunk it by 20 to install windows 7 on.
Well after some people told me it wouldn't work. I decide to re-expand the partition to take back up the whole drive.
Problem is, when I did that.. I loss that 20 gigs, it says that 20 gigs is 'used' space now. I tried scanning the hard drive for errors and defragging (won't let me defrag that drive.. I assume cause its either a solid state drive or the windows drive)
I don't know how to get that lost 20 gigs back.
Wondering if it is possible to have the same appdata, Program Files, etc. on dual OS (Win7 & Win10 Tech Preview) or even better, have both OS's on the same partition.
View 1 RepliesI have reg file, which alter some restricted keys and it works only from desktop.
Like: [-HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionRun]
I do not understand this, I am an admin, it does not work, whenever UAC is On or OFF.
I get a successful confirmation message from any location, but obviously it is lying to me.
Now that there are no parental controls on local user accounts, I set up a Microsoft account for each of my children so that I can limit screen time and accessibility to websites. I am now trying to merge their old local accounts to the new Microsoft accounts. I can log in to their local accounts and I can log in to their new Microsoft accounts, however, I cannot sign in to the Microsoft account from their local account (I'm only assuming this is how to do it). I go to settings, accounts, Sign in with Microsoft Account instead, enter email and password, enter old password, click Next and get the message "Oops, something went wrong Whatever happened, it was probably our fault. Please try again."
My goal is to save everything they have on their local accounts (Minecraft files especially) and get it over to the Microsoft account so that I take advantage of the parental controls. So, deleting profiles is not an option, but if there is a way to get everything moved over, then I can delete the local account, but how to move everything over.
URL....From the registry?
I know that in this case I need also to know what is the primary display or how to get only the primary display value because I want to get the value that set only for the primary display..The key "LogPixels" in HKEY_CURRENT_USERControl PanelDesktop Is no longer relevant for me in Windows 10.
In build 10240 I can download a Danish language pack in Settings. However I can't set it as primary... How to do this?
View 5 Repliesis there any way to use SSD as cache to speed up primary HDD with Win10? I happen to have a 24GB Intel 313 drive I'm using for linux but I was wondering if I could use it to quicken my Windows...
View 2 RepliesToday, I tried to remove my old windows 7 (installed in drive D), dual booted with window 10.
However, I couldn't remove it because it was a System, Active, and Primary Partition.
And my Default Windows 10 drive C was Boot, Page file, Crash Dump, and Logical Drive (as shown in the picture)
I currently I have W8.1 which is running on a HDD. For Windows 10, I am upgrading to a SSD for my OS, some programs, etc. Thing is, I want to keep my HDD for a storage drive. It has many pictures, videos, songs, etc that I want to keep. Problem is, it is currently loaded with Windows 8.1 and some programs that I would also put on the SSD. How do I just get rid of Windows from it to make it my storage drive? Do I need to? Should I just get a second HDD entirely and find a way to move my pictures, video, songs, etc to it?
View 1 RepliesI used a SSD to put the OS and other required things. I received my hard drive a few days later and just connected it. How to set up my new hard drive as the primary for installed applications, such as games. I would still like to use the SSD for my more necessary applications, but want the hard drive for large files. I am on windows 10 btw
View 1 Replies
