so I'm having problems with my audio. Whenever I play a sound it goes straight to my mic, even if my mic isn't plugged in, and my computer thinks my mic is. If I say play a Youtube video, whoever is in Skype can also hear it, and the only way that they can't hear it is if my mic is disabled. I didn't have this problem before upgrading to Windows 10.
View 1 Replies
How do I boot my pc straight into the desktop without the username and picture shown.
View 1 RepliesSo when you click All apps, you get an alphabetical list. If you have more than two programs installed, scrolling through it becomes cumbersome.A friend from the Insider program mentioned clicking on the title letters in the list, which wasn't at all obvious, and that produces a list of all the title letters, and enables you to jump to the letter of interest... if you know it [1]. But it takes three clicks to get to the list... Start / All Apps / A (or whatever).
Is there any way to reduce the number of clicks to get to that title letters index?Or am I better off to install Classic Start Menu, once it is working for Windows 10?
I have a lenovo e425 laptop that recently received the windows 10 upgrade from microsoft. I am currently running windows 8.1 Pro and when i started the upgrade to windows 10, every time it reaches the 30% part where it finishes the copying files part, and it restarts, my computer shuts down completely like *poof*...
When I put my computer back on, and it says attempting to recover installation, it shuts down AGAIN like *poof* Then when I restart it again, it just goes back to "restoring previous windows" and it restarts then my computer shuts off again like *poof* Then when i put it back on, it comes on normally, and says failed to install windows 10.
My mouse is rather fokked, but in quite a subtle way; you see, since yesterday-ish, myself/my computer just can not figure out how to mouse. I like to play games, but this oh-so-subtle fokkery has got me on the ropes in terms of not losing my mind midprocess. Attached is a picture of 6 lines drawn from right to left in as straight a fashion as I could manage; from top to bottom: top is 500x:500y dpi, 1700x1700, 2700x2700, 3300x3300 dpi plus a bonus at 3300x3300, and an extra on a different surface at my typical navigation settings of 2700x2700. My mouse is a Cyber Snipa Silencer, ( Cyber Snipa - Silencer Gaming Mouse )
Now friends, my question is... Why has this fokkery occurred? I haven't changed my mouse-surface equipment for years. No updates have been installed to my knowledge. restarted my computer, still fokkery.
P.S. here is another picture of 6 lines, same parameters, but drawn from top to bottom, left (500x500) to right (2 sets 3300x3300 then 2700x2700 different surface.)
I have a problem when pressing the search button. When I press the search button it launches the browser and goes straight to Google and in the search area reads "{searchTerms}". I have the latest version of WP 10 (insider fast). According to one site I found it could be virus?
View 3 RepliesI had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
View 3 RepliesWhen I open my email account from my browser I am taken straight into my emails without having to put in my account name or password. I always sign out. I never check the "keep me signed in" box. But this invariably happens. Surely there should be some security measure to prevent this as it seems to leave the system open to hackers.
View 1 RepliesWhen I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 RepliesI set my screen to turn off after ten minutes but it doesn't shut off. Today I read somewhere that it could be because I have a USB hub plugged in. Sure enough I unplugged the Hub and my screen shuts down as I have set it up to do. I need what is plugged into my hub and it is a real hassle to reboot my machine when I plug the Hub back in. I have also noticed one more thing and that is that programs that run in the back ground for instance Seti @ Home slows way down since the screen stays on.
View 4 RepliesI recently did the Windows 10 upgrade. Previously, my speakers worked fine. Now, they won't work at all. My monitor has speakers, and they do work when I select the monitor. However, Windows is telling me that my desktop speakers are not plugged in. That's not true of course - they are plugged in the same way they always were before, using the 3-colored jacks.
The speakers are basic Logitech speakers - two desktop speakers and a subwoofer. I found the devices on the Logitech support website, and checked for drivers. Logitech says these speakers have no drivers.
I was wondering how to keep my laptop from going to sleep when it's plugged in. I have all the settings set to "never" but it still goes to sleep after ten-fifteen minutes. For what it's worth, it's a Dell laptop...
View 9 Repliesever since I purchased a new computer this summer I have had the problem with using my speakers, my HDMI and headphone(Corsair Gaming H2100 Headset) sound is working flawlessly. When I bought it it had Windows 8 installed and I had the exact same problem then. I have both Realtek HD audio and NVIDIA HD audio installed, and I have tried to use both independently with the same result, this has been bugging me for months and I truly do not know what to do.
Edit: the speakers worked without any problems until I got the new computer.
i had my HP Pavilion dv6 7050ca laptop for 3 years now and it was working perfectly until today...I put in my battery (I usually only run my laptop with power cable without battery) and unplugged it to go downstairs to work. After I was done, i put it to sleep, brought it back upstairs and replugged in everything (headset, mouse) including the power cable and once I woke up the laptop, it became insanely stuttery, from the windows 10 interface to the mouse cursor to games to web browsing to everything! Everything still opens fast but it is just the movement of things: mouse cursor, gaming, web browsing, videos, etc. I already tried shutting down and taking out the battery and running it with only power cable like I used to, reinstalling graphics drivers, restarting the computer, unplugging nd re plugging, nothing seems to be working!
View 1 RepliesI can not boot in uefi mode or with secure boot on, I can only use CSM mode. Also when I try to boot without usb drive(which has win 10 on it) in computer it just shuts down and then turn on back and give me error that all boot options have been tried press f4 etc
View 9 RepliesI am preparing this flashdrive for a friend with his favourite anime on it and I carefully prepared all the folders to have neat little icons and hidden the icons files (along with some surprises) in an invisible folder, etc.
But when I try the drive on my laptop everything's gone. The icon's revert back to regular folder icons, everything is in details view (which also makes the invisible folder decidedly noticeable). is there ANY WAY to have a folder retain all of its settings when plugged into a different PC? Both PCs (mine and my friend's) are Windows 10. My laptop that I used for testing is Windows 8 however.
It DOES recognize my camera as an external drive, and any thumb drive I plug in...however, it says there are NO FILES on those drives. I import pictures every day, and can no longer do this. Is my only option uninstalling Windows 10 and going back to 8.1?
View 1 RepliesAsus x54H screen goes black in win 10 when laptop is plugged off and on battery
View 2 RepliesI've had this HP Envy for years and today my battery won't charge. I'm plugged in, so it's not dying, but my battery is at 1% and the battery status mouseover says "1% available (plugged in, not charging)". I've tried all the search results for this problem, including going into Device Manager and uninstalling the battery driver then scanning for updates, but it's still not charging. I even went into Command Prompt and tried sfc /scannow but it didn't change anything.
View 5 RepliesHow can i switch between headphones and speaker use w/o unplugging my headphones? I'm trying to leave them plugged in all the time cuz i use them for gaming. My back IO plate has the standard 6 jacks. the board is a z77 mpower. My case has a front audio panel.
View 3 Repliesin windows 7 and windows 8 windows defender is working , we can set removable devices auto scan. but in windows 10 - defender is not having menu options to removable driver auto scan facility.
is there any solution for this, or should i want to change any registry entry to make window defender GUI to previous version of defender.
yesterday i updated windows to latest preview.. install got struck in the middle and then after few hours it suddenly completed.
then it asked to restart as usual, but didnt complete the process. it went to blue screen.
now it only restarting to bluescreen only i plugged in.. no response.. cant even hard reset.
I am running Windows 10 on my Lenovo Flex 3 15.
My problem seems a little complicated so I'll go step by step what happens:
1. I plug in a USB device to use it (like a flash drive or a printer)
2. Windows makes the "device recognized" sound
3. Nothing happens, so I go to device manager to see if the device is actually working. It's listed under "other devices" and it says "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device."
4. I reboot my computer WITH THE USB DEVICE PLUGGED IN and all of a sudden and without explanation the device manager recognizes the device and its driver and I can use.
5. I unplug the device and plug it back in and it goes back to step 2.
6. Also, when I click "update drivers" it cannot find them automatically and when I search for the driver manually it just gives me an error saying it did not install successfully.
This is such a frustrating problem because it means I have to reboot every time I need to use a printer or a flash drive. I also have tried everything I can think of: uninstalling every last trace of the driver and trying to let it install freshly on its own; checking the status of Plug and Play; etc.
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I just bought this sound card and installed drivers for Windows 10. (and a crapton of bloatware with UI of Win XP media player...)
Everything works well except one thing: when I change the sound (or mute) I don't see Windows 10 volume bar. I mean these:
The sound itself changes, but there is no indicator. Is there a way to fix that?
Windows 10 Pro play sound at startup is checked but the select a sound option is grayed out...
View 6 Replies
