Mic Won't Work After Update
Jul 29, 2015
So after I updated to windows 10, all my settings went back to default (custom resolution, monitor icc profiles etc). That was fine, I changed it all back but one thing I cant get fixed is the fact that my mic from my iphone headphones will not work as they did prior to this install). The problem is 100% with realtek audio manager and i cant seem to find the settings that would fix it. I know its realtek because after I uninstall realtek and restart, my default sound card goes to HD audio manager instead of realtek and then my mic works perfectly fine right after.
How I can get realtek to make my mic work? or to uninstall realtek as a whole? Every time I uninstall realtek, it automatically installs its way back to my computer.
Also, my webcam that is connected to a usb in the rear works perfectly fine, however, the quality of it isnt as good as my iphone headphones so i'd still like to get that fixed.
View 1 Replies
Similar Messages:
Dec 8, 2015
I am having a weird issue with Windows 10 on my custom built machine. I have Windows 10 Pro version 1511. I just today started having this issue. I am assuming it was after the latest update because I had no issues on the initial bootup.
I fired up the pc, logged on like normal, and nothing out of the ordinary happened. Windows tells me it has an update installed and needs to reboot. Not doing anything important, I decided to reboot and get it out of the way.
Well, upon rebooting, it goes to my locked screen like normal. I click on my mouse to bring up my pin screen to unlock the pc, and the mouse won't work. I look at the bottom of it, and the optical light isn't even lit. Keyboard's number lock light is on, but nothing on the keyboard responds either. I turn on a USB audio interface I have, and it shows that it won't connected to the pc like it should either. It is like all the USB ports are dead.
Not knowing what to do, I hit the old reset button, and boot into my BIOS. Mouse and Keyboard work fine without any issues in the bios pages. Load back into windows, and I notice that the mouse's optical light is on, UNTIL it loads windows up. It then goes dead.
I tried taking a PS2 to USB adapter to the PS2 port, and that didn't work either. Eventually, after I leave it sit on the login screen long enough, the USB ports become active and I can finally log in and use it like normal. But it takes literally 5 to 10 minuets. I check device manager and it does not appear that any USB drivers where updated or changed.
So far, I have rebooted twice and the problem happened at both boot ups, but eventually the USB ports kick on and let me log in. After I log in everything seems to be working fine.
View 1 Replies
Dec 3, 2015
Since the last update my links in my Windows Live email and several other programs won't connect anymore.
View 3 Replies
Jan 5, 2016
Windows 10 went wrong Again! First I lost all my favorites, then my Computer experienced exceptions (what ever they are?) followed by random Crashes.
So I did a clean install using my ISO disc and tried to Install Page Plus X4 which was working fine before but it won't work now, even though I installed the latest patch.
I get told its an incompatible Programme, even though it worked OK before I did a clean install, with a note that says that Microsoft are looking for a Solution (you could have fooled me!) also I did the bit about using the Settings that worked on a Previous Programme but that didn't fix it either.
Also uninstalled and re installed the Programme but that didn't work either as did installing net framework.
Also when I get new emails, I am no longer getting advised of any new emails, so I have to keep checking my email box myself.
I looks like I may have to do yet another Clean Install.
I've tried turning off the Automatic Updates but that doesn't seem to work (maybe I'm doing it wrong, so how do I do that).
View 5 Replies
Jan 8, 2016
I've done a clean install and yet the issue persists. What should I do?
View 1 Replies
Aug 3, 2015
We couldn't get online to download your updates. We'll try again later, or you can check now. If it still doesn't work, make sure you're connected to the Internet.
have tried to search online, but no one lately has posted the same problem, this started 2 days after installment.
View 9 Replies
Nov 12, 2015
Laptop: HP-Pavilion Dv6-6c40ca
OS: Windows 10 (free upgrade)
Wireless adapter: Broadcom 802.11n (BCM9413HMGB)
I did the free upgrade from Windows 7 to windows 10 three weeks ago. It was a clean wipe/install and everything worked fine. I had working WiFi for three weeks.
Then I noticed windows updating itself when I powered-off the other night. The next morning my wifi was knocked out. Thew wifi symbol is still there, it just has a red circle with an x in it now. It doesn't show any networks. My other devices can 'see' over a dozen networks and can connect to my home network without issue.
Things tried:
-Uninstall/reinstall driver and restart
-"Roll Back Driver" and restart
-Download and install the latest driver from HP and restart
-Tried this solution to a tangentically related problem (that of people losing their WiFi directly after upgrading to windows 10)
Thoughts:
-the driver is very old (2012). the one from HP was uploaded in 2015 but when I click on the info I see it is issued in 2012
-Attempts to find the driver directly from Broadcom result here but these are all for Linux.. I am sure that Broadcom has windows drivers too, but how to find them?
(not sure how to link directly to image hosted on Google Drive. So this link is to a ss of my wireless adapters driver page in device manager) [URL]....
View 1 Replies
Dec 22, 2015
I upgraded to Windows 10 about a month ago. Two days ago my computer is all the sudden automatically downloading some. Massive update that took a long time and rebooted my computer without prompting me.
After the download was complete I was able to use my computer seemingly as normal, but upon the next restart, the start menu wouldn't open, and the mouse wouldn't click on any of the icons. I tried a restart and got two pop up error messages saying something like "Windows failed to start properly." I tried a hard reboot a coupe times, same thing.
Google searched the problem, found this and followed the steps: How to fix Windows 10 start-up problems - Blackscreen, Bootloop, Infinite Loading [HD 60FPS] - YouTube
No luck. Now every time I boot up my computer it goes to the "automatic repair screen."
I have tried every option available from the "automatic repair screen" menu, including System Restore: because I just downloaded Windows 10, I had no restore points. System Image Recovery: it says have no image to recover). Start Up Repai: tells me Windows can't repair the problem. Command Prompt: I've been able to get in there but I don't really know what to do once there (tried what was suggested in the video above, no luck, everything was already set to zero) Startup Settings:WAS working, I was able to start up in Safemode once, still couldn't click anything and start menu still wouldn't work. Now when I click on Startup Settings and click the restart button to get to the Startup options it just brings me back to the "automatic repair screen" ...I think I've rebooted so many times at this point that my computer can't reboot without taking me there.
I've even tried the "reset this PC" option multiple times and every time it starts to reset, gets to 1% or 2% and then I get an error message saying something went wrong and the PC can't be reset.
View 1 Replies
Nov 14, 2015
My wireless HP keyboard Sleep function used to work perfectly before Windows 10 install. Simply used to hit the Sleep button to close down, and then again to reactivate the computer. Since installing Windows 10 it works to shut down, but does not reawaken the system. Very annoying - I don't want to have to open my laptop and hit the Power button every time, how to resolve.
View 2 Replies
Jul 30, 2015
I updated to Windows 10 this morning, and after doing so realized that my side scrolling on my mouse pad (I'm on a laptop) doesn't work anymore. Googled, found out it was a driver issue, and went to download the correct driver.
However, acer aspire drivers don't have the touchpad driver updated for Windows 10 yet. Do I have to wait until the driver comes out to fix this issue? If so, how long that could take? (They have the important drivers updated already, those for bluetooth and wifi)
View 9 Replies
Jul 16, 2015
Before 1 hour i updated to the last build but some problems appeared. I cant open Market when i click it shows the logo and then it close also when i try to play an mp3 it pops an error box saying "the remote procedure call failed" i cant open videos as well and also photos tab from start doesnt work too . I had a clean installation of the latest Official ISO from MS.
For example when I try open a pic I get this ....
View 3 Replies
Nov 2, 2015
I am having trouble accessing MS app store and also updating office 2016 through any of the office applications.
My question is, will win 10 apps and office 2016 default update through windows update?
View 3 Replies
Aug 15, 2015
Bought a new PC that came with Win-8.1 and decided to jump direct to Win-10 with a clean install... no update from 8.1.
It worked fine for the first 3 weeks but within the last week when I do a Restart it goes into the "Don't turn your computer off while doing update" or something to that effect.
It restarts three times getting as far as 55% but the next time it restarts (the 4th time) message says "We couldn't complete the updates. Undoing changes". When it finishes it restarts again and finally boots correctly.
PS: If I do a Shutdown and power up again the it boots correctly... no restarts!
View 4 Replies
Mar 26, 2016
For the past few days I have been having the issue were an update keeps failing in windows 10 so every time it re downloads the update it tells me that my pc is going to restart in about 10 minutes regardless of what I am doing and this is about at least 3 times a dat and it is extremely annoying.
The update is a thing called "microsoft malicious software removal tool" and windows wont let me disable automatic restarts or automatic updates and i dont even need this "update" because its just a virus removal tool which I don't need but windows wont let me cancel the update.
View 1 Replies
Dec 9, 2015
Well only 'View installed updates' works. (the earliest shows only one of 21 November - I thought November had a big update. no?)Clicking these does nothing:-
Win Update Elevated Installer
Win Update settings
Advanced Win Updates options
Check for Updates
As I updated via this on another computer yesterday with no problem (except updating 4 items took over 4 hours!!) what can be my present glitch be?
View 2 Replies
Aug 24, 2015
I cannot get the sfc to work in windows 10, all I get is an explanation of the checking modes. I have logged in as administrator and put in sfc /scannow...
View 1 Replies
Aug 12, 2015
I have just installed windows 10 and I am listed as the administrator. However, if I try to save a newly written document in a folder that I have always previously used for that purpose, I get a message which says:- You don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the Documents folder instead?
I have also noticed that many folders in my C: drive have a small icon attached (a tiny box with a blue top and right facing arrow head). If I try to access any of these folders I am refused permission with the message "access denied". For example, if I try to enter a folder shown as C:/users/all users/documents I get this message. There are dozens of places where this 'blue arrowhead' occurs.
View 8 Replies
Aug 5, 2015
Impossible to get local printer to link to windows 10.
View 5 Replies
Sep 7, 2015
My mail app does not work
View 4 Replies
May 4, 2015
I am in the UK. I have changed the region, language, keyboard and system locale all to US English and it still flippin doesn't work. Says Cortana is not available for your market. What am I doing wrong? Am on latest build on Dell Venue 8 Pro tablet.
View 1 Replies
Aug 10, 2015
USB flash drive works fine, printer works fine, just any mouse. The laptop is a Compaq C500. Tried updating driver in Device Manager but I get an error: windows encountered a problem installing the driver software for your device. Windows found driver software for your device but encountered an error while attempting to install it. The driver installation file for this driver is missing a necessary entry. This may be because the inf was written for windows 95 or later. I went to the Intel(R) N10/ICH7 Family USB Universal Host Controller - 27Ca and downloaded the most recent driver but when it tries to install it just says error encounter setup will cancel.
View 1 Replies
Aug 26, 2015
So I had Windows 8 and upgraded to Windows 10 now my mouse won't move . I can't click on any options I can only bring up task manager. One tech support guy told me I'd have to bring my computer in to reinstall Windows 8 because it doesn't show up as an option when I tried to reset it. But ive noticed a lot of people had this problem should I take It in or do any of you have something that works so I don't have to pay.
View 1 Replies
Jan 14, 2016
My 2 USB 2.0 hubs on my case won't work, while the 3.0 works just fine. I've tried updating drivers, reinstalling them, and even uninstalling every USB driver and updating all of them. I finally went to:
C:WindowsSystem32DriverStoreFileRepositoryusbstor.inf_amd64_b9f7cf2be3ee13d5 a
And there are only 2 files in the folder: usbstor.inf and USBSTOR.SYS. I'm missing usbstor.pnf, could this be why my USB 2.0 ports won't work? If so, where can I get this file at? I can't find it anywhere.
View 1 Replies
Jul 30, 2015
I don't use cortana, and I was expecting the search bar in start to function like Windows 7. I don't understand the point of the search bar, all it seems to be able to do is show apps and search the web. Even the list "all apps" in start seems to be a random selection of programs that are actually installed.
Steam has a shortcut on the desktop and takes up most of my HDD, but when i type "steam" into the search bar it couln't find anything. Why can't it search files/folders/programs?I know it's easy to use windows explorer, but it's frustrating having a nicely layed out search bar on the desktop that can't search properly.
View 1 Replies
Aug 2, 2015
cannot get the webcam to work. Device Manager does not show any problems, but I see that there is no imaging device for the webcam! It worked under Windows 8.1 fine.
View 1 Replies
Jan 27, 2016
my start button wont work, i cannot restart my computer and even from the sign on screen the only option i ave it to shut down. my icons are still on the taskbar but i cannot view them and when i open my browsers its deleting my last sessions even when i have them saved to appear each time i open the browser. my time and date is gone as well as any viable option to get to my drivers and computer settings. the only thing ive been able to get to is the actio of using the windows button and pressing r but each seach i get an error message that anything i type cant be found.
View 3 Replies