Using the same settings and programs as in my 8.1 installation. Nothing funny, or game-related running in the background (also tried disabling everything possible). The problem is that the monitor will not turn off, either from the Power/Display power-off options (nothing happens after set time passes), or with a program like ScreenOff and Monitor Off.
Using one of these apps, will start turning the monitor off, but it will turn itself back on automatically almost immediately. Something is interfering but I cannot figure out what. No security software installed (using Defender, tried disabling it). The only way this works as intended, is in Safe Mode.
I upgraded my Windows 8.1 computer to 10 over a month ago. Although I like Windows 10 a lot, there is a problem I've been having with the monitor not turning off automatically.
The display is set to turn off after 5 minutes of inactivity, but it never does. No matter how long I set the wait time. I set up a hot key to automatically turn the monitor off. It worked in 8.1 but in Windows 10 the monitor turns off for a half second and then turns right back on.
I did not change any hardware settings when I went from 8.1 to 10. I've tried unplugging various things connected via USB but nothing so far has solved this problem.
The monitor I have is the Dell E2414Hx 24-Inch Screen LED-Lit Monitor.
Since upgrading from Windows 7 x64 to Windows 10, my monitor/display on my desktop will no longer go to sleep/turn off after the scheduled 5 minutes. I had no issues with this in Windows 7. I have updated the BIOS, video drivers, USB wireless mouse driver and anything that could be related and no change. All i want is for the monitor to turn off after the set time. I don't use a screensaver. There is no driver update for the monitor (Viewsonic VX2450). I've also tried uninstalling the monitor driving and reinstalling but no change. Seems like the system also will not sleep when set to sleep.
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
I did an upgrade from Win 7 , and Screen Saver / Turn off display after 5 mins was working under Win 7 64 bit.As my title suggest Screen Saver / Lock screen Slideshow / Turn off display after 5 mins are not working under Win 10.The Lock screen Slideshow is there when Win 10 starts but only shows ONE image, never moves to another.
THINGS I've done so far to get any of these working ...Screen Saver / Lock screen Slideshow / Turn off display after 5 mins.I’ve turned off all the Wake on lan functions.Tried different folder/ images for the lockscreen Slideshow ,window spotlight and picture.Tried to set new power options , was able to get SLEEP to show up in "Start" as it was not there before, but once click , the display DID turn off, but wouldn’t turn back on with mouse movement keyboard presses, had to do a hard reboot. Win 10 started without issue and the SLEEP mode was no longer aviable via the power "start" menu.
how to get all of these working. Really would like my display to turn off after 5 mins , and the Screen saver to work , the Lock screen.
Since the last update my turn off display does not work. I changed the timing in settings/personalization/lock screen/screen time out to 4 minutes but the display stays continuous.
I noticed my power options only seem to work once. If i go into power settings and set it to turn the monitor off in 1 hour it will work. Once I move the mouse and turn it back on it wont work a 2nd time until i change the time to a different number like 45min.
I have a Toshiba laptop running Windows 10. My main display monitor is a LG 24 widescreen plugged into the laptop.
With Windows 7, I had no problems in using Fn key f5 to set the display to only the LG (showing as "CRT" on the screen). This did not change when I re-booted the laptop.
With windows 10, it reverts back to to the default setting and I get the laptop screen and the monitor lit up.. I frequently get a different resolution on the display too, until I open the laptop and re-set the display with the Fn key. This is annoying, as I use an external keyboard (which doesn't flip the Fn key) with the laptop lip down.
I've also tried via Control Panel (Display) but that doesn't hold the setting either.
For the last 2 months since I got my new PC, I have been using my TV as a monitor for my PC. I had a few issues with resolution due to my TV overscanning the display but I used the resize feature in the NVidia control panel. However, yesterday when I downloaded Windows 10, it installed fine but when my computer opened up again it was trying to use my TV's native resolution which was a problem because of the overscanning. So I went to the NVidia control panel, and when I clicked the resize button (before choosing the new resolution) the TV just said it was receiving no input. Whenever I then tried booting my PC, it would display to my TV until Windows had loaded, then it would say no input.
The same thing happened when I connected to the TV through my motherboard rather than my GPU. So I spent ages trying to get it to work and eventually connected it to an old monitor. However the monitor only has a DVI input slot, which my GPU doesn't have, so I had to connect it through my motherboard and it worked fine. I then uninstalled all NVidia stuff from my computer, including the gpu from my device manager, and manually installed the new GTX 970 windows 10 driver from their website.
When this was done, I connected my graphics card to the tv through the HDMI, keeping the computer connected to the monitor through the motherboard. Both displays then worked as a dual display setup. However, even now whenever I try booting up my PC with only my gpu connected to the TV the same thing happens that was happening before and the TV will only display through the GPU when the motherboard is also connected to the monitor. I have ordered a DVI to HDMI cable so I can attach my monitor directly to the GPU, which will hopefully work, and then I will stop using my TV, but I would rather fix this problem and carry on using the TV until I can buy a better monitor.
Is there a way to prevent the screen from turning off when the computer is locked? She likes her lock screen images but the screen turns off after 30 seconds or so when locked. (I tried telling her to use desktop wallpaper, but she likes the lock screen better.)
I have three PC's all running the same OS setup but one no matter what I try after 2 minutes the display goes blank, move the mouse and the desktop is there! I found in link but for Windows 7 with the term called "System unattended sleep timeout" added to Advanced Power Settings" but cant find anything like this in Windows 10. And I do not know even if this feature is part of Windows 10 it could be something totally different.
Today I upgraded to windows 10, and the first thing I noticed was that the display on my main monitor was out of bounds(1920x1080 btw). I know the task-bar and icons on the desktop are there, but they aren't in the frame of the monitor. My other display is flawless, but the main one isn't. I turned down the refresh rate from 60 to 30 on the main monitor, and that let me see everything on my desktop, however, there is a flicker when I go over stuff. Also, I feel that there is somewhat of an input lag with the mouse.
I am having an issue with the Windows 10 machines that I have installed thus far. I do not use a screen saver, but use the power settings to turn off the display after a certain period of time. When the display goes off, it forces me to authenticate to get back on the computer. I have tried to shut off the screensaver, check, than uncheck the box for "On resume, display logon screen". No matter what I do, I cannot get this to NOT make me authenticate when reawakening the display.
I do run a domain at my house for background info. Been working on this for a few days now with no real progress.
I set up a wake-up alarm in the Computer management --> Task Scheduler that automatically plays a custom mp3 every morning at 7AM.The speaker is in my monitor and it goes sleep 10 min after idle. It's ok, I don't want to keep it turned on for whole nights. But, when the scheduled alarm comes, it does not automatically turn back on the monitor and therefore its speaker doesn't play the MP3 because the monitor remains in sleep.I tired various ways to make the alarm turn the monitor back on but failed.I just need my music file played as an alarm in the mornings.
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
Does the new Maps app being built for the phone and PC features voice turn-by-turn navigation? I know the current Maps app does not. You need to use Here Drive or another third party app for voice navigation.
I am having problems with me Mouse and key board, on boot up they will turn on for about 20 seconds then turn off. Then a error comes up,inaccessible_ boot_drive. But if I restart my pc the mouse and keyboard will do the same thing but instead of the error I get, choose keyboard layout, and a list of options but I cant choose them because the mouse isn't working. This all started happening after I upgraded my power supple but I when I put my old power supple in I had the same problem. I have windows 10and I have tried using different keyboards and different usb ports.
MSI R9 390 GPU AMD Catalyst version 15.7.1 Main monitor is CrossOver QHD270 via Dual Link DVI Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
