Monitor Displays Artifacts After Waking Up
Nov 4, 2015
I'm not sure where the fault may be for this, but here goes. I have a Dell E7250 laptop connected to a standard Dell e-port docking station. My monitor is a Dell U2515H connected via DisplayPort. Anytime I am away from my desk long enough, my laptop goes into sleep/power save. When I wake up the computer, the right side of my laptop shows heavy artifacts. If I unplug the DisplayPort cable from my docking station, then reconnect it, the issue goes away. I've swapped docks, cables, and even monitors, all identical, and I can't seem to narrow this down. I've also updated to the latest monitor driver for Windows 10 x64, and that didn't solve the issue.
View 1 Replies
Similar Messages:
Oct 17, 2015
I have two displays or monitors, side by side.The taskbar clock only displays on the right monitor. I would like it to display on the left monitor, or both monitors.How can I change this?
View 2 Replies
Oct 6, 2015
After upgrading to Windows 10, the "extend displays" function is not functioning well on my PC (ASUS monitors; ATI Radeon HD 2400 PRO display adapter). I have tried disconnecting & reconnecting and have tinkered with most related settings I am aware off, but all in vain.
I found a crude workaround accidentally. I restart my PC from the log in screen until the dual monitors start in the extended view (how this works!). It usually takes about two to three restarts.
View 3 Replies
Oct 16, 2015
Win10 runs flawlessly, standard PC, no problems never so far, PC+Monitor goes to sleep/wakes up on moving mouse, using keyboard... all is fine, drivers are newest. Only after Windows installed automatic updates unattended, mostly at night, it doesn't seem to go back to sleep correctly.
I just log off usually and the PC will sleep then. Windows update wakes it up, runs updates, but then the Computer keeps running. The monitor gone black does not wake up. Also the PC does not react to the PowerButton set to "shutdown".
Have to 5 sec. Button turn off/on. And every time after this happened and Windows booted properly, it tells me "updates have been installed"
View 4 Replies
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Sep 23, 2015
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
View 1 Replies
Sep 22, 2015
Windows 10 Home 64-bit Toshiba Satellite S855
I've modified my power settings to NEVER turn off displays and NEVER put the system to sleep/hibernate.
Nevertheless, after 5 minutes of inaction, displays go dark.
I haven't tested the sleep/hibernate part yet.
View 2 Replies
Sep 3, 2015
I have a Dell XPS 15 L502X + IN2020M_Digital monitor connected via laptop’s HDMI port. Graphics is a NVIDIA GeForce GT 525M. I upgraded from Windows 7 to Windows 10 and I can no longer Duplicate the displays.However, PC Screen Only, Extend, and Second Screen Only will work.In Device Manager I have uninstalled both the IN2020M and the Generic PnP Monitor and restarted. They were added back but no change.I basically confirmed that the monitor is not the problem because I also can't Duplicate the displays when a projector is connected via HDMI.
View 1 Replies
Oct 22, 2015
Recently upgraded to Win10 pro 64bit. I have an ASUS HD7770-1GD5 video card running both a 26in HD wide monitor as well as a 17in square non HD monitor. Duplicating the screen content on both is what I need. Somehow I had this working great in Win 7, but I must have something set wrong, as the content on both monitors now is indeed the same, but the square screen displays in landscape mode which makes it difficult to see. The clarity of the wide screen monitor is much less than optimal as well. What are the correct settings for this type of setup? I have the widescreen connected via HDMI cable and the older square LCD monitor is connected from the DVI output to a VGA adapter for the monitor.
View 1 Replies
Aug 7, 2015
When I first upgraded, the taskbar on my first display was located on the left side of the display and the taskbar on my second display was located on the bottom. I liked this. But I wanted to see how I'd like having both on left hand side. I went into taskbar properties. `Taskbar location on screen` was set to `custom` and I changed it to `left`.
I decided I didn't like this and wanted to change it back. But `custom` no longer appeared in this drop down and I couldn't find any other option to change them separately. Is there any way to change it back? Perhaps a specific registry key?
View 3 Replies
Sep 27, 2015
Have this problem where your task bar on you other display dont auto hide it is quite annoying.
View 4 Replies
Aug 17, 2015
Windows 8.1 had detecting my 2 monitors attached to the laptop. After the upgrade to Windows 10, its not detecting those two monitors.
View 2 Replies
Aug 7, 2015
I can't upgrade to windows 10 and it displays the message as in the attached image.
I have Windows 8.1
View 2 Replies
Nov 5, 2015
After doing a repair via SFC /scannow I noticed that the shutdown screen no longer displays during shutdown. The Shutting down splash screen displays, then the monitor goes dark. The screen that shows the processes that are hanging with the option to force shutdown no longer displays.
Is there a registry or other setting that will fix this?
I also made some registry changes (after the above) suggested by a magazine but they don't seem to be working. For example, to enable jump lists in the start menu, it said to add a DWORD called EnableXamlJumpView with a value of 1. I did this but no Jump lists.
View 1 Replies
Nov 22, 2015
I have a small network of computers and Homegroup is working a little to well. The network has had to have some changes, machines converting to W10 and changing names. The problem is there does not seem to be a way to refresh the Homegroup list of machines that have joined the Homegroup.
Or is there? do you know a way to display only the machines live on the LAN.?
View 4 Replies
Dec 12, 2015
Since the latest Win 10 update (12/12/15) the notification area shows bluetooth as highlighted. How do I turn that off? My laptop does not have bluetooth facility! There is nothing in the settings area to accomplish this.
View 5 Replies
Dec 16, 2015
I noticed a few days ago that all my file explorer views are double spaced. Coincidence? My 1511 update installed the day before this display problem,
View 4 Replies
Nov 7, 2015
Now the calendar just displays Microsoft's ugly icon in the calendar square. Used to be it would just have a number there. Like today it would have a 6 for Nov 6. I don't know how to do anything with the Start screen except Pin to it, remove items from it, rearrange items. I opened the calendar and looked at settings and saw nothing.
View 2 Replies
Sep 5, 2015
I have installed Win 10 from scratch (no update). I have 3 monitors. I have created a theme with a different background image on each monitor. After a random time, the three images are suddenly mixed up, image 1 appears on monitor 2 or three, etc. When I click on another theme and then on my own theme, the images are restored to the correct monitor.
My PC is part of a domain. Some buttons on the themes page that I had in win 8.1 are now gone, so I am unable to select things like slideshow etc. In fact, beneath the window with the themes, I have no buttons at all.
Some settings in the registry that I can use in order to prohibit the changing of the backgrounds? I tried Group Policy but that didn't work out.
View 1 Replies
Dec 31, 2015
I have just had my Win 10 Home edition re-installed. After I performed a Reset that corrupted. After the re-install, it updated and since then, my Incredimail crashes as soon as it comes on screen. Tried uninstalling / reinstalling and same thing is happening.
View 19 Replies
Mar 2, 2016
I just installed a new SSD and moved my OS onto it, however now I can't start my computer with both of my displays plugged in (1 HDMI and 1 DVI). The main display (HDMI) will flash on and off while the DVI does not receive any signal, until I unplug the DVI and then the computer starts like normal. Both displays work just fine after it has booted.
My display driver is NVIDIA GeForce GTX 950, and it is up-to-date as of the time I'm posting this. The Nvidia control panel recognizes both displays and has the HDMI selected as the main display without me having to touch it.
I could boot with both displays plugged in before I installed the SSD.
I did a clean install of Windows (not cloning) originally on the SSD and even tried to re-install again to see if it would fix it and it does not.
The only option in BIOS related to display is to go back to my processor's integrated graphics instead of my Nvidia card, but this really should not be related to the issue at all as both the DVI and HDMI are plugged directly into the Nvidia card's ports.
Something I found very weird when I was checking the BIOS is that if on boot I go to BIOS, exit, and proceed to boot, it works just fine. But not if I just do a normal boot.
View 3 Replies
Oct 11, 2015
I've had my Inspiron N4110 laptop for a while now and it seems it might finally be kicking the bucket. It works fine for a while and then it just starts flashing rainbow colors on the external screen I have it hooked into and static horizontal lines on the main display. This happens maybe once or twice every week. The fan kicks into high gear and I can't do anything, so I have to restart it. After the restart, it is usually extremely slow and cannot operate for the most part. In its most recent episode, it has worked pretty good. Before its most recent episode, I was able to figure out a few things. (its running windows 10 btw)
Using CrystalDiskInfo, I was able to figure out that the hard drive is okay
I used Auslogics Disk Defrag Professional to see if it was fragmented, but its only at 2%
I used the command prompt and ran sfc /scannow to determine that there are no system file errors
I used Auslogics BoostSpeed 8 to do a registry cleaning, and its fine.
Right before its latest episode, I removed a USB without doing the safe extract thing, but I doubt hitting that would have worked. This was happening before I upgraded to windows 10, but it has been happening more frequently lately. I'm running a virus scan with Malwarebytes and will post the results soon. I have not been able to determine a cause for this. I took a video of the problem ....
View 1 Replies