Mouse And Keyboard Don't Work - No Cursor
Jan 12, 2016
turned my computer on yesterday and it loaded up fine, apart from there was no cursor and my keyboard wouldn't work. I have a R.A.T. 5 mouse and a Coolermaster QuickFire keyboard. I know that they're on and working because their LED's are on. I decided to plug in my old ps2 keyboard and restart my PC to enter BIOS. I checked and it recognises that the keyboard and the mouse are connected into the USB hub and says they're working. Another thing, even my ps2 keyboard doesn't work when my computer gets past the start screen!
View 1 Replies
Similar Messages:
Sep 13, 2015
So my computer started running a bit slower then it should be, at the point where my computer to open would take half a min, so i did fresh install. So i left installation overnight, i wake up in the morning and it say "Hi there" installation menu where you choose Country, language, keyboard layout and timezone, but it's totally froze, i can not see mouse cursor or use my keyboard, if my monitor goes to sleep i can't turn it on back. I did read that it's problem with drivers not installed. I've tried restarting pc few times. Is it true that problem is with drivers not installed correctly or at all?
View 1 Replies
Jan 31, 2016
I have been getting random BSODs, sometimes they happened 3-4 times a day and sometimes I will not have one for 3-4 days. Also sometimes my computer will just freeze, mouse cursor and keyboard not working and I have to hard boot. Also some times when it freezes, a stutter/buzzing noise is head through my headphones. Attached is the files
View 9 Replies
Nov 5, 2015
i upgraded windows 8 to windows 10.now the mouse cursor and keyboard function keys is not working
View 3 Replies
Aug 2, 2015
I've just installed windows ten and my usb mouse wont work, even the cursor isn't visible, nor is there any lights on my usb keyboard. I've tried the other usb ports on my pc, the results are the same, nothing. So now I am stuck with the start page, I can't move on , why this has happened.
View 4 Replies
Aug 24, 2015
Installed Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 Replies
Aug 11, 2015
I have a Dell XPS 17 laptop. Worked great under Windows 7. Tried Windows 10 but was unable to get the wireless LAN driver to work, so I went back to Win 7 via the official "Go Back to Windows 7" option in Windows 10 - now the keyboard and mouse won't respond after start up. They work fine in the bios, but are completely unresponsive on the login screen - even when I boot in safe mode. No USB ports work, so I can't try another keyboard/mouse. Was going to reinstall but I'll lose the existing data. Now I'm going to have to pull the drive and copy over manually, then reinstall. Last thing I was going to try was disabling EVERYTHING in the BIOS just in case there was some kind of weird IRQ conflict, etc.
View 1 Replies
Dec 5, 2015
I just went from Windows 7 to 10 and now my USB keyboard and mouse are unresponsive.
View 5 Replies
Aug 31, 2015
I recently tried windows 10... didnt like it. Did the recall back to windows 7 option. Let it do its thing. Came back and my computer was trying to rapair itself... said could not reboot windows is checking for a solution.. I let it go.. it said no solution found. And just turned off..So I restarted spammed f8. Tried to start in safemode.
Got to password screen and mouse and keyboard won't work...So I restart, spam f8 again. I select repair windows this time, cancel the repair process then clicm.advanced options. Try to look at restore points... and it says none exist... that is bs. I did restore points twice a week. when. I try to start normally it loads her goes to a blue screen with tons of writing and letters and errorrs but no time to read any...
View 1 Replies
Aug 15, 2015
I'm guessing it doesn't recognize the 10 drvers. And without the keyboard I can't log in because I have a password. Keyboard does work in bios though but not in safe mode.I really don't want reinstall and lose all my data
View 1 Replies
Aug 21, 2015
My mouse and keyboard (both are USB) don't work, but they are lit up. I tried replugging them, but that doesn't work. I tried using F8, but that doesn't work. I also don't have a PS/2 port, as I am running BootCamp on a Mac. I even tried using the Apple Keyboard.
Before this problem, I had issues with BAD_POOL_HEADER (BSoD) on Windows 10 after updating drivers. Checking if I had any system restores, it didn't have any that I made before the update. So, I reset my computer, with all files intact. Then my problem arises; keyboard and mouse do not work, and I'm pretty much stuck on the login screen.
View 1 Replies
Oct 21, 2015
i just formatted my pc. I got the following screen; URL... My mouse and keyboard are not working eventhough there is a light burning in my mouse
View 1 Replies
Aug 15, 2015
I'm stick on the below screen. My keyboard and mouse will not respond. I don't get a login prompt. The time is correct and the little icon in the bottom right indicates if my Ethernet cable is connected.
I had Window 7. I used the microsoft provided upgrade to install windows 10. The process seemed to have completed successfully. I was able to get a login prompt once and successfully logged in. I opted to not send any information to microsoft at the initial propts. I got to my desktop, everything seemed to be working ok. I thought there were a few startup apps I didn't need in my tray. So I turned off auto startup on login for OneDrive, Skype, and my logitech camera. I restarted and now I get stuck at this screen.
The time updates correctly over time, its not frozen. I can plugin/unplug the Ethernet cable and the little icon in the bottom right will change to indicate if it has internet. I can press the power button on my computer and it correctly interprets that as a shutdown command and it gracefully shuts down.
My mouse/keyboard wont work. They used to work fine. I am able to use the mouse/keyboard in my BIOS with out a problem. However the moment the system starts to load, the lights on my keyboard and mouse go out and they become unresponsive. I tried various combinations of pluging the USB keyboard/mouse into different ports. I tried using different mouses and keyboards. I tried disabling legacy USB support in the BIOS. Nothing works.
I tried getting into safe mode but can't. Most solutions to get into safe mode require your system to already be working correctly. Holding F8 or F8+Shift don't work.
I'm currently installing windows 10 on my lap top so I can try to create a restore disk. Which should then allow me to go into safe mode and try to repair what ever has gone wrong.
My computer is sporting an i7 with 16 gigs of memory. I use a 128gb SSD for my system and have 3 other hard drives for various data storage. No other OS installed. The computer has been functioning fine for the last two years.
View 9 Replies
Aug 7, 2015
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
View 5 Replies
Dec 21, 2015
Okay, so I take blame for accidentally messing up my Windows 10. My NVIDIA graphics card wasn't working and wasn't letting me install my drivers. Well that aside, now that I installed older Drivers Windows 10 registers something horribly wrong. It wants to do a system repair. Okay, good, fine with me. But then when it gets to the page for me to select a keyboard layout, I have no mouse and my keyboard doesn't work either.
Anytime I press a button on them their backlights turn on, but then turn back off when I don't do anything with them.
I can't afford to get a new OS, I have no DVD Drive so I definitely can't do anything that requires a disk. What do I do?
View 6 Replies
Jul 30, 2015
I've tried to disable Palmcheck but that did no good.
View 3 Replies
Aug 17, 2015
I am new to using Windows 10 - 'just upgraded from Windows 7 about 3 days ago. So far I'm enjoying it except for the trouble I'm having with my mouse cursor. Any time I transfer to another monitor (I run a 3 monitor setup), my mouse cursor gets stuck if I try to move to the next screen via the corners of my screens.
I've read everything I could on every forum I could regarding registry edits and disabling various features and nothing seems to work. As far as registry editing goes, everything I read is for Windows 8.1 and my machine doesn't even HAVE the registry keys mentioned in those work around. It's very frustrating and counter intuitive to keeping my Windows experience productive and ultimately a bit of a deal breaker.
View 2 Replies
Oct 19, 2015
I recently upgraded my notebook to Windows 10 from Windows 7 and in like 1 or 2 days after my mum used it, it now has a blank screen on startup and you only see the white mouse cursor moving. This is apparant no matter how many times I HARD press the power button to switch it off and switch it back on.
Also, I tried to stick a Windows 7 CD in so I can reformat it BUT as soon as I press the power on button, the option to press Del or F12 to enter bios settings to change boot order does not work?
View 9 Replies
Jan 4, 2016
I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.
I have tried various Windows supplied options with the following outputs:
1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible
2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required)
3. Start Up Repair - issue not resolved
4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point
5. Booted in Low-Resolution video - again same
View 4 Replies
Aug 3, 2015
I just upgraded from 8.1 (brand new) and I can move my mouse cursor for a couple seconds then it freezes and starts showing a loading circle every few seconds.
View 6 Replies
Jul 15, 2015
As the title says, my mouse cursor is behaving strangley, it has lines going through it and has enlarged itself. I've not modified anything in the cursor options, I've even click on default settings, restarted my PC ect and it's still not reverting. The strange thing is, if I log out of Windows, the cursor goes back to normal, but as soon as I log back in
It used to look like this:
Whereas it now looks like this:
View 9 Replies
Dec 2, 2015
Its invisible when on the graphical metro boot menu... It only recently got like this.. How can I fix?
View 3 Replies
Aug 3, 2015
I upgraded a desktop computer from Windows 7 ultimate to Windows 10 and there seems to be an annoying black screen issue which happens before the login screen.
After the Windows loading logo, the screen stays black for about 60-80 seconds (and all I can see is the mouse cursor). After 60-80 seconds, the login screen pops up and everything works fine and I can login.
I already tried the following:
- Updated NVIDIA drivers
- Completely removed NVIDIA drivers to see if it was a drivers problem
- Booted into safe mode, still happens
- Checked event viewer, nothing weird in the logs
- Made the PCIE slot the default slot for the primary monitor in the BIOS
- Ran the sfc /scannow command, no violations found
- Ran all Windows updates
- Took a look at the services and startup processes, nothing weird here
- Turned fast boot off/on, no change
- Full Malwarebytes scan, no infections found
I ran a xbootmgr trace log, here's the summary XML file: processSummary numProces - Pastebin.com
I'd like to keep the fresh installation option as a last resort.
View 4 Replies
Aug 15, 2015
i upgraded my windows from 8.1 to 10.evrything seems fine but when i launch my games it won't run.i run dxdiag then i noticed that my intel vga and nvidia 840M's driver were uninstalled. I open the ASUS installer and installed my display driver.when i reboot, the screen goes black with the mouse cursor in it after ASUS logo.3 leds were lit.the hdd led is blinking. i reboot several times and hit F8, unfortunately nothing happened.
View 1 Replies
Aug 16, 2015
I just upgraded to Windows 10 from Windows 7 and I have a 2 monitor setup. I like to drag/drop windows from one monitor to the other, but Windows 10 has a barrier it seems right in the top corners. If I'm on the left monitor, and I go to drag a window to the right monitor, it will hang in the top right corner of the left monitor and not move, until I move the cursor down slightly, then it'll let me move it. Is there a way to remove that stopgap so I can move windows freely from one monitor to the other without having to go around the top corner?
View 7 Replies
Oct 14, 2015
I have had this issue for only a couple of days now. I've tried uninstalling/reinstalling the drivers for the mouse, sound card, and headset, which still hasn't worked. I've seen other sites talking about an "Intel Technologies Access Services" which isn't showing up in my task manager or services (I'm assuming that's a good thing). I guess I'm just not exactly sure what else to try at this point.
View 5 Replies
