So I just recently updated to Windows 10 on Sunday and now the little blue busy circle is constantly flashing. I have already tried restarting, checked for updates on drivers and nothing is working .
View 4 Replies
I know there is others who have this issue of the flashing blue working circle next to the mouse pointer on the screen. I have read through he forums and tried what I could find but so far no luck getting rid of it.
I upgraded from Windows 7 to 10 - on my Asus sonicmaster laptop and now the flashing blue circle constantly shows up in and on and off state. Like it is trying to load or check something. How to get rid of this?
I have this constant loading going on somewhere in my computer. it interferes with my games or if I put anything to full screen it automatically pulls it out of full screen and minimizes it. It also interferes with my typing. If I'm trying to type in an address to go to a website the flashing loading will make it so I have to keep clicking in the address bar to finish typing out the address. auto saved usernames are also an issue. where I'll type the first three letters of my username. It will pull up then immediately disappear. I have to be really fast to click it or result to the constant clicking of the username bar to put my username in.
Also an issue with right clicking anything. the right click "open, delete, new folder, etc" will come up and before I can move to click what I want it disappears. I restarted my computer and it went away once. I thought the issue was resolved and paid no attention to it. I then turned my computer off and back on after a virus scan and the problem persists again. I tried turning the computer off and on again but again the problem continues. how I can find whats constantly loading/causing the flashing loading icon next to my mouse?
after installing windows 10, a blue circle next to the arrow cursor continues to flash after logging in. the keyboard seems to be affected because sometimes a key has to be struck several times for the computer to recognize it.
View 4 RepliesI put window 10 on my dell XPS-420 I sign in it goes to my home page and the screen keep on flashing i can not do anything the arrow that the mouse move there's a blue circle that keeps on going and when it stop the screen stop flashing too it last 10sec then it start to flashing again with the blue circle keep turning like it up date something well it 2 days and the same thing the pc on for 2 days too ...
View 4 RepliesThis just started yesterday. Did not have it previously. Now when I boot the blue circle is always by the mouse pointer. Nothing I do gets rid of it.
View 1 RepliesInstalled win10 and after an hour (?), restarted and got the log on screen. After logging in, windows did some customization and displayed the screen similar to win7 After log on. The screen is frozen, with a blue animated circle (similar to hour glass function), but doing nothing. Logged off using ctrl+alt+del, logged in, same result. Restarted, same result. What do I have to do to make it work or just go back to win7
View 3 RepliesThis revolving blue circle interferes with typing an email......MOST annoying. No wonder Windows 10 is a bummer.
View 1 RepliesI have a freshly upgraded laptop (8.1 > 10) which worked fine until now. When I try to shut down the PC, it just hangs at the blue shutting down screen and the circle keeps on spinning.
I have to hard power off the laptop by holding down the off button, but that isn't going to do the laptop any good.
What can I do to fix this? Is there anywhere that will tell me what happens when shutting down?
Have desktop HP Pavilion P 6000 4GB DDR3 1 Terabyte memory. Had no problem with Win 7, but frequently get the blue spinning circle next to my pointer. Some times it continues to surf other times it give a temp freeze. Checked CPU percentage not high but disk will jump to 100 on startup. The computer light and sound is chomping away when I am just reading the news. Ads in the middle of the page on both sides of any game I play along four or five TV commercials during a 15 minute online Hearts. Reset to factory settings. Hardware problem or Win 10 too busy data mining. I google an issue and 10 minutes later check my email getting solicitations on the same issue.?? Edge was very fast when first downloaded. Oh yes download speed is 35 but runs closer to 40.
View 1 RepliesHave a Pavalion P6000 series $GB DDR3 ram and a Terabyte hard drive. Page hang up. Check and all drivers indicate updated and the ram is running about 49% with Edge browser open. Using Webroot Security Suite I did an Analyze function and got bac k "Active process has a possible memory leak (Edge.exe)" When I googled this it was a problem asked several times when people changed from Win7 to 8.1.
View 1 RepliesI currently have Win10 32bit. I made a bootable USB and DVD to upgrade to the 64bit version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just the logo. I let it sit for about 4 hours and nothing changes. I've tried many methods but none seem to work.
Core2Duo 3ghz
4069 RAM 560ti video card
1 terabyte HD.
Intel P35 BIOS for P35-DS4 F12
I also have my hard drives partitioned
Legacy mode BIOS
Since loading windows 10 then mouse pointer working circle blinks with the can light blinks. Everything seems to work fine it just really bugs me. I went to setting and mouse then to pointer and it it set on the pointer only or top/first on list. this is a 1 month old Asus X550Z that came loaded with 8.1
View 1 RepliesI have a constant flashing blue wheel by m cursor. It wont allow me to use drop down boxes, skips letters while typing etc.
View 1 RepliesMy computer has always been fine, until one day i was getting pop ups and redirected randomly, i notice a strange file called "techsmart computer" and was trying to delete it but couldn't so i wanted to go into safe mode and forcibly remove it, i open the start up menu simply check safe mode only and restarted, ever since all i see is the black screen with it loading with nothing else no repair, error message just it loading then it goes to the login screen the blue one and for some strange reason it is flickering as it its turning on/off and its a never ending load! if i press the power button its shutting down and it stops flickering, i searched online for solutions and nothing relevant and of the possible solutions i cant do because i can never get into the login screen, this is not a instillation issue or driver or graphics card, etc... started ever since i checked the safe mode, i want to mention i'm writing this using a different computer, also don't know if its a 32 or 64 bit.
View 1 RepliesSystem Specs:
Corsair CX850M PSU
MSI NF980-G65 Mobo (nForce 980a chipset)
AMD Phenom II X4 970 CPU
8 GB Corsair DDR3 1600 RAM
Nvidia GTX 570 GPU
Samsung 840 PRO SSD
1 TB Seagate HDD
What's Happening: I'm getting random BSOD's mostly from ntoskrnl.exe all pointing towards hardware failure or driver issues, as well as games crashing anywhere between 15-90 minutes of play time. These crashes are just a simple "game.exe has stopped working" and don't report that the display driver has failed or anything. In event viewer the exception for the crash is always a 0xc5 (Access Violation). For some reason this doesn't seem to affect 2D games as I can play Spelunky for as long as I want with no crashes. Google Chrome crashes pretty often as well, seemingly at random. I never had any issues on Windows 7 and this all started the instant I upgraded to Windows 10.
Since this has started, I first attempted a clean install of windows and continued getting crashes. I then got memtest86+ just to be sure it wasn't memory and let that run overnight, which reported no errors. Most recently, I've attempted a clean install of display drivers using the guide here, went to MSI's website and only found updated audio drivers, and got the most recent chipset drivers from Nvidia for the nForce. I'm still getting crashes, and just got my first BSOD since doing the clean install (IRQL_NOT_LESS_OR_EQUAL from ntoskrnl.exe).
Basically, I'm just wondering if there's anything obvious I should be trying that I've missed or if I should give up and try to revert. It's entirely possible the driver at fault is Nvidia's display driver since I've seen a lot of complaints about it, in which case I would have no choice but to get off windows 10.
I built a computer a few months ago using:
A Gigabyte Z97X Gaming G1 Motherboard
An Intel i7 4790K CPU
16 GB DDR4 Patriot Memory sticks
Samsung EVO 240GB SSD
Nvidia 256 GB Graphics card
Corsair CX750 Power supply
I immediately bought Windows 10 for it, and for the most part the computer worked fine the last few months. Every once in a while I would get a "Driver Stopped Working but has Recovered" that messed up the Windows control bar and required a restart to fix, but that stopped happening eventually with updates. I still got BSoD's from time to time, including "faulty hardware corrupted page."
Today I got a BSoD when I was logging in called "DPC Watchdog Violation," which I had seen before I think so I figured it would just restart and be fine. However, now I cannot restart the computer, because after the Gigabyte motherboard logo, all I get is a blue screen that flashes on and off quickly. It is just a blue screen, sometimes with a dot in the middle. No matter what I cannot get past this infinite flashing screen, even in safe mode. Commands from the keyboard do nothing once I reach this screen although I can the mouse around. I can enter the special Windows control menu before getting to the flashing blue screen, but nothing has worked from there
Things I've tried:
-Disabling restart after BSoD -- no effect
-Restoring system image -- error, then no effect
-Resetting Windows -- no effect (although I've lost all my applications now)
-Removing my graphics card and plugging my monitor directly into the motherboard -- no effect
-Updating BIOS -- no effect
Currently trying to figure out something I can do in the registry. My last option is completely redownloading Windows 10 without saving files, but I'm not confident that will work given everything else I've tried.
Laptop issue. I was using it without any problem, but ten I restarted it. I could normally login, but when desktop shows up I cant click any icons, run task manager and when pointing mouse on taskbar, it changes to wait circle. After some time window saying that program stopped working shows up but it does not change anything.
View 4 RepliesI am having troubles with my mouse. I am currently on Windows 10 and have just encountered a problem. It started when I closed down a tab and the mouse flashed to the top left corner of my screen, now as soon as I move the mouse it instantly moves it back. Something weird is sometimes when I open up a different tab for example a game, the mouse does the exact same thing but in the middle of the screen. I have tried unplugging and re-plugging the mouse back in AND Turning On and Off The Snap On mouse feature.
View 3 RepliesJust upgraded to 10. Not blown away so far, but it's a lot less stupid than 8. Glad they gave it away for free, seems like the fair thing to do considering they actually charged people money for 8.
Anyway, I'm here because my mouse settings keep reverting back to factory every time I restart the laptop. I can't stand finger gestures and tap to click, but they keep coming back like a bad case of herpes. Unlike my herpes, I'm still hoping I can cure this problem.
The loading symbol keeps flashing which is effecting what I can do on my computer. For example on Microsoft edge I will be typing and then it will suddenly select the text, so when I do my next letter it deletes everything I have done. It also effects things like drop down menu's or when I left click by going of it so I don't have time to select the option I want.
This does not seem to happen all the time but it currently is and has been since I turned my pc on.
It has only happened since I have downloaded windows 10. I do not have windows 8.1 on my computer as I deleted it so I cant really go back to download it again.
My mouse stutters and freezes and jumps around when at 4k at 60 Hz and certain windows flash too. and the mouse is squished and stretched. but if i leave all settings the same and switch to 30 Hz everything works fine.
View 9 RepliesI upgraded from Windows 8 to 10 without a hitch an hour ago and kept all of my personal files and apps. I set up my start menu and everything was working fine, but I wanted to change the image on the logon screen (or whatever you call the screen in between the lock screen and the screen where you enter your PIN/info). So I took a risk and downloaded the 3rd party app here:
[URL] and uploaded an image and hit apply. Of course right after doing that I went to lock my PC to see if it worked, and as you can tell... it didn't.
I've tried rebooting and it hasn't worked. It's just very rapidly flashing between a blue screen w/ a loading circle and my lock screen image.
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
View 5 RepliesCan't scroll by holding middle mouse and moving mouse in IE in the latest build.
View 2 RepliesSo I recently upgraded to windows 10, the Installion performed successfully, I selected my account and chose the express settings, after this I was presented a green screen with a series of dots spinning, I let this run for well over two hours in which nothing had changed, after waiting I did a hard shutdown.
When loading up it gave me a blue screen where I had some options to choose my os, where I selected windows 10, the screen then went black with the windows logo, then the green screen returned, I then went to bed and upon waking up it was still stuck on that green screen.
I tried clicking, escape, when pressing Ctrl alt del I was presented a navy blue screen with a few options, network status, ease of access and shutdown options. I've done multiple restarts, on the blue screen where you select os i have tried safe mode and now I am attempting to restore previous build.
