i don't want my mouse or touch-pad to wake my laptop from sleep when it gets triggered, I have been to 'mouse settings' & unchecked the part about waking up PC' & i hit apply & OK but no good. Now the touch-pad wont wake it up but my bluetooth mouse still does it. I'm at a lost as to what other settings i missed or if its a bug somewhere.
View 3 RepliesI have successfully activated hibernate mode (S4), yet whenever the PC is hibernated a shake of the mouse or the press of any key on the keyboard just wakes and turns on the PC. Needless to say I do not want this to happen. Hibernate (S4) works as confirmed by the fact that when it's waken up, the PC goes through the POST phase of the boot before loading W10. In addition a powercfg /a gives the following output
Code:
C:WINDOWSsystem32>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast Startup
Sleep (S3) works too. Although it seems to have the same effects on the hardware (turns off the CPU fan), the waking up it's much quicker, without POST. In addition, here's the log from Windows event viewer:
Code:
Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 12/12/2015 16:40:19Event ID: 42Task Category: (64)Level: InformationKeywords: (4)User: N/AComputer: DESKTOP-9NITH1LDescription:The system is entering sleep.Sleep Reason: Application API
[code]...
In the UEFI BIOS all the ACPI settings are in order, as shown in this photo. Bios is updated to the latest version.
View image: WP 20151201 11 43 34 ProEnabling/Disabling Fast-boot and/or fast start-up changes nothingI tried also a different USB wireless mouse, but no changes. With a PS/2 mouse the PC does not wake up from hibernation.Switching the Logitech Unifying receiver between USB 2 and 3 makes no difference.The same mouse and keyboard do not turn on the PC after a complete shut down.
So as the title says, every now and then Windows 10 randomly decides to wake itself up from sleep. It doesn't happen at any consistent time, some days it stays asleep until I actually turn the PC back on. Using powercfg /lastwake just gives me a wake history count and doesn't provide any information.
I can't figure out why this is happening. I've tried googling it and have found similar complaints but no real solution. It's not hardware that is waking it up and I have already disabled the "allow wake" setting for my network adapters in device manager.
Upgraded to Windows 10 and now the computer wakes itself from the sleep. I have already disabled network adapter, mouse and keyboard from waking the pc. I have also disabled scheduled tasks from being able to wake the computer.
View 1 RepliesPost W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
I've searched the board and found many similar problems to mine, but nothing exactly like it, and as such I haven't been able to fix it.
When put in sleep mode, my computer automatically wakes up at a set time.
I have disabled wake timers in the power menu, I have clicked of "allow [this device] to wake up the computer" on every applicable device (mouse, keyboard, HID-compliant device, NIC...)
Here's what the CMD-prompt says about armed devices:
As for the wake timers themselves:
since this a Windows process I can't just shut it down.I can't seem to find it in the Task scheduler though...
My system: Win 10 64 bit Retail, MSI B150M Mortar, Intel i5-6500, Samsung 512GB SSD, Corsair 2 x 4 GB Memory, etc.
Although my keyboard and mouse are allowed to wake the PC from sleep (in Device Manager), they don't wake the PC. Interestingly, pressing the "Power Button" on my Fractal R5 case does wake it up from sleep.
I did the w10 update fairly quickly when it was available. upgraded from windows 7 using their program. not fresh install. perhaps this is reason for weirdness.
My computer seems to be waking very often at odd times. using powercfg /lastwake i see one reason is:
"owner supplied reason: .../Media Center/mcupdate_scheduled"
My question: If media center was removed in w10 why does it still have a folder, and why are its pointless scheduled tasks still running? How do I remove these and other waking scheduled tasks?
Each morning when I wake up, my computer is on, rather than in sleep mode, as I left it. I have disabled the power of the mouse to wake it.
View 9 RepliesI installed Windows 10 right after it came out and have had very few problems but in just the last few days it stopped waking from sleep. The power light used to flash and it would wake from a mouse or keyboard button press but no longer. The system power will come on from a press of the power button but the screen remains blank. If I remove power from the system and then repower it and turn it on it will start the BIOS and re-boot to the state that it was in when I put it into sleep mode. Clearly the hibernate process is working but something is haywire with the wake process. How to troubleshoot?
View 2 RepliesSo I just installed a security program, and my windows 10 pc oddly goes to sleep and wakes back up instantly, twice. It seems like it stopped, but I would like to know if this should sound an alarm for any malicious activity.
View 5 RepliesI am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
I had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
View 3 RepliesTitle says it all. After waking from sleep mode the computer disconnects from the internet and I have to reboot to get a connection. Makes the whole point of having a "sleep" mode useless. This is annoying because often I go away from m y computer for a few hours during the day and don't want to have to reboot to get back onto my computer. Rebooting wears out the components and is uneccessary when it should simply wake from sleep mode with no hassles. I have a wired connection via ethernet cable. My router is always switched on.
View 4 RepliesWe have been using at home wireless logitech keyboard and mouse K270 and M505 respectively. All have worked great and have been using the unifying software. Since upgrading to Windows 10, I have been losing the pointer when my computer wakes from sleep or is unused for a length of time. Whilst I agree this definately looks like a window glitch. I have done all the usual things like refreshing drivers, new batteries etc.
View 1 RepliesMy motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.
I did the windows 10 upgrade, and all seems well, except waking from Standby.
If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.
But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.
I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.
Here is some investigating I did, hopefully it works:
Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?
I'm running my audio via HDMI from my graphics card and it plays through the speakers built into my monitor.
When I first did the Win 10 update I had no audio whatsoever, and followed some suggestions on online forums that lead me to disable the Realtek High Definition Audio which I did and upon a reboot- my HDMI audio was working.
But then I had another weird issue. My PC is set to never sleep as I use it as a media server, but my screens turn off automatically after 10 minutes. What im finding is that when I wake up my monitors the audio stops. When I view playback devices I can't do any tests because "the device is already in use by another application"
(note: I have the checkbox for allowing an application to take exclusive control of a device un-checked).
So far there are only 2 ways to restore audio. 1) restart the PC. 2) go into device manager > Sound, video and game controllers > AMD High Definition Audio Device > Disable... wait a few moments > Enable.
Recently my mouse pointer has been disappearing when the system wakes in Windows 10 Pro. I can still see it highlighting when moving the mouse and the dialog open with a right click. It only comes back if I open the Task Manager or a separate window. Strangely if I manually put the computer to sleep through the power menu this issue does not seem to appear, it only shows when the computer sleeps after the allotted time.
Not sure if this is an issue with Nvidia Drivers or a Windows Update.
Yesterday I downloaded and had a fresh installation of windows 10 (means I have no backup of my previous windows 7). Now since installation, whenever my PC goes to sleep I fail to wake it up by pressing any key on the keyboard or touchpad.
I've tried to find the power management in keyboard settings from the device manager but I failed to find any option there.
Device: HP Probook 450 G2
Screenshot of Keyboard Properties:
I have power settings to shut the screen off after 15 min. and put PC to sleep after 20 min. After returning to the PC after more than 20 minutes the PC won't wake up when I move the mouse or type on the keyboard. How do I wake the PC? This only happened since I installed Windows 10.
View 5 RepliesI have a MadCatz Rat9 wireless mouse and in windows 10 when I go to sleep mode the wireless mouse does not charge. I had windows 7 ul before and the mouse charged fine in sleep mode. In device manager I checked the mouse drivers and in power management allow the computer to turn off this device to save power is greyed out. Allow this device to wake the computer has a checkmark. why windows 7 charged ok in sleep mode and windows 10 will not.
View 1 RepliesRig only a few weeks old and I noticed for the second time now when my computer is left alone for awhile it acts like it's in sleep mode but mouse and keyboard don't seem to be waking it. I fixed it last time by just restarting computer...
View 1 RepliesI ran pc last wake and it said this
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
Wake Source [0]
Type: Wake Timer
Owner: [SERVICE] DeviceHarddiskVolume2WindowsSystem32svchost.exe (SystemEventsBroker)
Owner Supplied Reason: Windows will execute 'NT TASKMicrosoftWindowsUpdateOrchestratorReboot' scheduled task that requested waking the computer.
Let me preface this by saying that I'm an average user. I surf the internet, create documents, and basic things like that. I can attempt troubleshooting by following tutorials/instructions.
I recently upgraded my desktop & laptop to Windows 10. The desktop wakes itself from sleep most of the time since upgrading. This wasn't an issue in Windows 7. The laptop has not displayed this issue to the best of my knowledge.
So far I unchecked the "Allow this device to wake the computer" option in Device Manager--> Network adapters--> Realtek PCIe GBE Family Controller--> Properties--> Power Management. I saw that tip somewhere on the net.
I have my laptop set to sleep when I close the lid. That works. But after the computer is sleeping and the optical mouse has shutdown (lamp off), if I simply unplug the power brick it will wake up again, the sleep light goes off and the mouse lamp comes back on and it starts running (lid closed).
View 2 Replies