I have an SSD with a Windows 10 installation on it. This Windows 10 is and upgrade from Windows 8.1 which was an upgrade from Windows 8. I still have the Windows 8 key and installation media. What I'm doing is building a new computer, but my hard drive is still new, so I want to keep it. When I put it in the new system I plan on doing a refresh or clean install, so that everything is nice and clean.
But, I don't have a product key for Windows 10. Is my only option to use my Windows 8 CD then upgrade to 10? Is there a way to retain my 10 installation then reset it? This one hurts my brain. What I think would be best is right before I move the hard drive is do the reset, then move it to the new computer, but then I don't know how windows will active since I can't use the 8 key and it can't do a internet activation based on hardware because all the hardware is new.
I was wondering if it was possible to copy the Windows 10 OS to another hard drive and still be able to use the old one. I have an old laptop, mainly used for videos and internet use, and I would still like to be able to have it for mobility purposes. I'm in the process of building a gaming PC, so of course, I'll need an OS for that as well.
I just bought a new computer and it comes with Win 10. I need to plug in my old hard drive with all my installed programs and data (Win 7) and moved them to that new drive (Win 10). Is there a software that you would recommend for this and what should be done? Clone or image? I am lost in terminology!
I just got a new computer with Windows 10 (Jury's still out) and am trying to access my Buffalo external hard drive from it (i believe it is a NAS. It lists on my desktop as LS-CHLD2F). I disabled windows media player cause I don't want to access it through that (screws everything up). I also installed the Buffalo disc on the new computer but that didn't seem to solve anything. I would like it to show up in my network but just don't know how to get it there and obviously don't want to reformat my hard drive. I just want it to be seen. All of my work is on there and need to access it as is.
Update: I am now able to access it from the desktop but still isn't showing up when I go to File Explorer then Network. It is a Linkstation.
I have a Toshiba Satellite S55-A5294 laptop computer. It is running Windows 10. I had the drive encrypted using Jetico's BestCrypt full disk encryption.
Several weeks ago, I was using Windows, put the computer to sleep, and when I came back an hour later and woke it up, I got the "Preparing Automatic Repair" screen. This was followed by a message that automatic repair was unsuccessful. This problem has happened in the past. In the past, it was the result of a Windows update overwriting the BestCrypt bootloader (BestCrypt encrypts the system partition, so it has to have its own pre-environment password prompt, which can then pass to the mounted system). However, this time it wasn't the case.
As it turned out, I had a corrupted volume. I was able to recover my data. I pulled the hard drive out of the Toshiba computer, put it in a USB enclosure, and connected it to a Lenovo Thinkpad E530, also running Windows 10. In this configuration, I was able to decrypt the drive, and access my data.
I restarted my Lenovo and forgot to disconnect the Toshiba's hard drive. The Lenovo booted right up, into the Toshiba's desktop. I backed up my data, and, for good measure, made a disk image of the whole thing.
I pulled the drive out of the enclosure, and reconnected it to the Toshiba, from which it originally came. When I turn it on, however, I get a BSOD informing me that I have an error:
INACCESSIBLE_BOOT_DEVICE, and the computer then automatically restarts. Upon restart, I receive either the same thing, or a "Preparing Automatic Repair" screen, which then tells me that my computer failed to boot, and suggests a restart. There is also the option for advanced troubleshooting. If I restart, I get locked into the same loop.
I am still able, however, to pull the drive out of that computer, and boot it up when it's attached to my other computer.
I tried connecting the drive to the Toshiba (the original computer from which it came) via the USB enclosure, and I still get the same errors. The Toshiba is able, however, to boot a Linux Live USB.
I know that the drive is bootable. And I know that the Toshiba is willing to boot. They just won't play together.
I ran chkdsk on the system volume, and found no errors. I tried using the Repair option on a Windows 10 installation USB, and didn't really get anywhere.
why the same disk would be bootable on one computer, and not bootable on the other.
So i have 2 hard drives, one new and one beginning to die on me. I have windows on the dying hard drive, and do not have the original disks or product key. I tried using DriveImage XML to copy everything onto the new drive, but for some reason when it boots it says "Hard disk failure" when i have the just the new hard drive in there (i am 100% sure it is plugged in properly). I really dont have the money to buy a new windows disk, and so i was wondering if it would work if i were to factory reset my computer and have windows 10 reinstall on my new hard drive, or is there an easier way?
I upgraded my windows 7 computer to windows 10. I have an external hard drive that I am unable to open. When I connect it to the computer now, a reformatting window pops up asking to do this. Obviously, I don't want to delete the data on there as I used this drive as my backup. How can I go about opening this drive?
I checked on someone's else computer running windows 7 and my data is there, but my friend upgraded his computer to windows 10 and now I can't transfer data that way.
The hard drive is a WD Scorpio, model WD25000BEVS. Don't know if that is useful. I am wondering if part of the issue is that I have this harddrive is from a previous laptop that ran windows vista. That computer failed bcs it was a subpar HP product. I literally baked the motherboard several times for it to work. I finally gave up and got a new computer but kept the drive. I should have reformated it but I only deleted everything but the user folder.
I am wondering if part of the issue is ownership of the drive. I know that when I first used this drive I had it take ownership of the hard drive. I know this can be done in window 10, but I can't seem to ever open properties of the harddrive while its plugged in.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
I have an old computer with a bad motherboard that I am thinking about taking the hdd out of and reinstalling it in a new computer and duel booting between win7 and win10, my question is "can it be done"?
If I remember correctly, Windows 10 Product Key (or license) is based on a hardware ID of some sort. If I have a working Windows 10 on a HDD (or SSD), and I'm ready to junk that computer and want to move that "licensed" version of Windows 10 and the HDD to a new machine, how does Microsoft deal with the hardware ID since the ID is based on the old hardware and not the new?
Why I do this is unimportant. In Win 7, when I move my daily backup files (2 weeks worth about 20gb) from my current BU folder to my save BU folder, the move took a couple of seconds (I think because only the file pointers were changed.) Under Win 10, it takes in excess of 2 hours (I think there is a physical move of file data.) This is my third try since installing Win 10 on my (admittedly slow) server. Will renaming the files work?
I currently have one drive that contains a System Reserved partition (which includes the boot files). The status is System, Active, Primary Partition.I have another drive with the C: partition. The status is Boot, Page File, Active, Crash Dump, Primary Partition.I've been told that if I remove the disk (it's a bit flaky) with the System Reserved partition, I won't be able to boot up. If this is true, is it possible to transfer that partition to another drive? If so, does it have to be at the start of the drive? Alternatively, can I make the C: partition include System status?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
Desktop Icons move back to the left (default) side of the screen after customizing. this happens when the the computer is put into sleep mode and is woken up or when the monitor is turned off and turned back on. I upgraded to windows 10 Pro 64bit from windows 7 ultimate 64bit. This problem never happened with windows 7.
-Automatic Sleep mode is turned off - when I manually put computer to sleep mode and wake it up the icons are rearranged
-Automatic turn off monitor has been deactivated - when shut off my monitor but keep my computer on and then turn back on the monitor the icons have rearranged
-I have small icons setting
-Auto align icons has been deactivated
-allow themes to change icons has also been deactivated
My Computer: LG 34UM65 - 21x9 - 2560x1080p resolution AMD 9590 Asus Crosshair V Formula Z Gigabyte HD7970ghz Corsair Platinum Ram WD HDD Samsung 850Pro - Windows 10 is installed on the SSD My Drivers are all up to date. and Motherboard Bios has just been updated to 2201
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
I have had windows 10 since the beta and I recently bought a kingston 120gb ssd I want to do this by reinstalling but since I got windows 10 during the beta with no install disk I have no ability to simply reinstall but how to transfer my license.
I have two hard drive on my PC, as SSD for the OS and a HDD for all my storage.I seem to have a problem with search, that it will only find stuff that is stored on the SDD.To get it to look for other files on the HD, I have to click search my stuff, and even then it still doesn't work.Is there a way to fix this? As most of my stuff is on HD and click search my stuff is a bit annoying.Also when I click rebuild index, nothing happens. I get a dialogue box saying it will take a long time, but then it doest say its indexing
My old computer was a windows 8 that was upgraded to windows 10. I just ordered a new i5 6600 which comes with windows 10, a 250G SSD and 1 TB hard drive.. My old hard drive appears to be a Seagate Barracuda 1TB SATA which seems to be the same as the one in my new Vanquish. My old hard drive is 2/3 full and is backed up often. My question is can I move this old hard drive to my new computer as a separate drive without formatting it and use the data on it (or transfer my data) or does it need to be formatted (thus giving me roughly 2 TB of space with the 1 TB provided with the computer). It was my C: drive in the old computer.
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
Haven't had to rip lately, thought it was easy, went to play a cd in the player and I can't rip cds in Windows 10 to hard drive. What am I missing? WMP will not allow ripping.
So, I currently have Windows 7 installed in a standard HDD and I bought an SSD a while ago with intentions of reinstalling windows on it. With the Windows 10 update coming in tomorrow, I was wondering if I could install the Windows 10 update on the SSD. Even if it's just installing it on the current HDD I have and then doing a clean install on an SSD. Point is, I want to know if there is any way I can have Windows 10 running on my SSD after tomorrow.
