My network connection user name shows "Secured". Right below is the same name followed by "- guest" and "Open". Is this a potential problem? Does this allow someone else access to my network connection? If so, how do I delete it?
View 2 RepliesMy pc was installed with windows 10 dual boot with windows 7. After I removed windows 7 from harddisk somehow the dual boot options were not removed. I am still able to log into windows 10 but it is kind of disturbing. How should I completely remove the dual boot screen and log into win10 directly?
View 1 RepliesMy Grandma pokes around way too much in her computer that has Windows 10 I used to remove all kinds of things in Windows 7 but since upgrading to windows 10 I all the things I had setup to no longer show are now back again after update. The things I would like removed are...
The power menu when you click Start (I use a CLI command in the Run Box to restart and shutdown)
The Network Icon in the task tray
The Volume Icon in the task tray
Any visible access to control panel (I use Windows+R to bring up run and enter "control")
When I go to Settings > Network and Internet i have very few option unlike most peoples windows 10 I've seen.
I have:
Data usage
Ethernet
Dial-Up
VPN
Proxy
But in videos and friends I've seen many more options...
I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
I ran into something strange this morning when I logged onto my computer: I couldn't connect to my wireless network anymore.
Fairly standard, I thought I'd go reset the router and have it be done with, but then I noticed that my phones were both still fully connected. (2 android phones on different OS versions). So my router itself wasn't have a problem, and I was still receiving internet.
I restarted my computer, as any good human being does, and the problem persisted. I then 'forgot the network' and restarted. Typing in my password again and trying to connect, didn't work.
I then remembered I had recently updated Windows 10 #sillyme (Not like I had a choice anyway x_x) So I thought maybe the driver had been updated. Nope. I even tried uninstalling the driver anyway and restarting. Nothing changed.
OK, so then maybe it's my hardware that's going bad? Luckily I have a dual boot So I booted up Ubuntu instead of windows and bam, everything is working perfectly. Absolutely no problems with connecting to my network.
Can't connect to WiFi network. I've already tried: restarting computer, forgetting the network, and uninstalling the driver. Also, it's not hardware as I can connect on the same machine using a different OS.
Decided to upgrade my Surface Pro 2 to Windows 10 today (got the Pro 3 so this is kind of a test toy now) and after the upgrade I have no network connections.
Device manager shows it is installed and working properly however there are no network adapters listed in Network Connections.
I tried plugging my Cat5 Dongle in and it seemed to recognize and install drivers etc... but again, its listed as working properly in device manager but its not showing up in Network connections.
When I click a zip file all the options are grayed out. If I right click I do not have an Extract option. If I click Send to Compressed (Zip ) folder it makes another copy in the same folder. What is the next step? How do I open zip this?
View 2 RepliesAfter spending many anxious days trying to elude a hacker, I Reset my desktop PC yesterday to get a clean Windows 10 install. The legacy network connection I know is routed through the Hacker who is using Teredo tunneling software. I am trying to set up a new and secure VPN network connection to the Internet. But the PC keeps whirring without any visible connection progress. The Network Connection dialog box tells me that Windows 10 is trying to create a WAN Miniport (IKEv2). The legacy connection is on Ethernet with a Realtek PCIe GBE Family Controller, which I imported to the new Windows install.I am worried that I don't have the correct adapter settings and that a new connection can not be created while the legacy one still exists.
View 8 Repliesafter upgrading from windows 8.1 to windows 10 I have no internet connection.From looking around various forums the problem is usually a VPN or anti virus issue so I have used the f secure removal tool to uninstall my anti virus and used revo uninstaller to remove hotspot shield VPN from my PC before upgrading with no success. The network connections icon looks connected when the pc is first turned on then it changes to the yellow exclamation mark. I have updated the network adpater driver to the latest and also tried plugging in a USB wireless adapter which has the same problem. Will refresh your pc in windows 10 resolve this issue and does this remove all my saved files?
View 5 RepliesI have just set up the "o2 HomeBox 6641".
How can one change the name of the network connection:
"WiFi" can be changed / renamed, but "o2-WLAN" cannot, I would like to rename it.
How / where can I change the WPA2 key, the password for the Internet connection?
And, do I need a password - there is no one else using the Notebook - to enter the program / GUI in the browser to change settings for the router?
If I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
The upgrade from 8.1 went smoothly, the only problem so far is that
I lost my Home Network connection and don't see how to re-connect.
My Home Network consists of 3 computers, an ancient XP, a newer WIN7,
an HP Printer and this one running WIN10.
Where do I find the screen(s) that will let me connect this computer to mt Home Network ?
This is all after upgrading from Windows 7 three days ago.
After two days of enjoying Windows 10, my internet just started going out. The pc would freeze for a sec and then id get a red x in the bottom and my wifi would be gone. In device manager, it always shows my wifi network adapter operation was unsuccessful. I switched to a different adapter and installed the latest drivers, which say are compatible with windows 10, and the same issue still happens. I also tried some CMD command I found online related to old VPNs and that didn't work.
Usually it only fixes if i unplug and replug the adapter. Disabling and enabling doesn't work. I repaired winsock and renewed tcp/ icp and that didn't work.. What can I do? I cant go 20 minutes without losing internet.
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.
I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.
I have a Packard Bell Easynote TK37 that has recently been "upgraded" to windows 10 and ever since keeps randomly losing internet connection. This is happening nearly every time I use the pc, it loses connection for 30seconds or so then reconnects.
The network adapter is Broadcom 802.11N
Connected to a Virgin superhub.
I have Avast internet security installed.
Husband updated his laptop to Windows 10 several months ago. So far it's been good, and he likes it...that is until this morning. He opens the laptop...no internet connection. It shows our wifi network, but won't connect. He enters his password...says he needs to enter password for that device. Enter password from before Windows 10...no good. Enter password for micorstoft...no good.
Using my laptop (Windows 7) to find fix. I've tried: Troublshoot network connection by right clicking. Right Click won't work...nothing happens. Maybe keyboard language is wrong...no settings button available to look at keyboard properties. Try connecting directly to router...won't make connection. We've rebooted the computer a couple of times, to no avail.
Our phones are connected, my laptop is connected, our chromecast is connected, so we know it's not the router. There is something up with his laptop.
Playing ring around the rosey is not the best way to spend a Sunday morning. no internet connection = no ability to enter password = not able to troubleshoot internet connection = no internet connection = no ability to enter password.
I installed an application "Clone File Checker" and uninstalled that using "iObit Uninstaller" with Power Unistall" option. After that, i am not able to open Control Panel, Programs & Features, Power Options and System from the Start Menu. Clicking on each of these gives an error in the enclosed screenshots, but all of them display the error message "This file does not have an program associated with it to perform this action. Please install a program, or if one is already installed, create an association in the Defaults Program Control Panel". Only the file names are different. When I try to set the Default Applications, I do get a similar error message.
Moreover, clicking on the File Explorer from the Start Menu opens the Explorer screen, but when I pin to the Taskbar and subsequently attempt to open tit from Task Bar, I get an error message.
OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.
i was create map network drive in windows 10 now i need remove but idont now how removed it
View 4 RepliesMy Windows 10 seems to share some files and i cannot figure out how to disable files sharing.
I have 0 files in my Media player library, also, i have no other dlna sw installed that shares anything.
How to remove these files from shared list?
I just realized that all the shared files are .mov files. Are the .mov files automatically shared somehow?
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
I have two wireless networks at home, and one is faster than the other. This is because the slower one is wired to my desktop, and the modem and router are the same box. So I would like to remove the slower from machines wireless connected. I searched the forum, and got a solution, the command below, but the answer, as can be read, is that the filter does not exist in the system. I am attaching a screen that shows GVT-15DF at the list of connections.
C:Userslarau>netsh wlan delete filter permission=allow ssid="GVT-15DF" networktype=infrastructure O filtro nao existe no sistema.
Upgrading from win 8.1 Pro to win10. Seemed to be going well and then saw lost internet connection in systray. Troubleshooting came up with "windows sockets registry entries required for network connection are missing". I can connect to the internet but not to the LAN.
View 7 RepliesI have a Lenovo Yoga Tablet 2-1051F running Windows 10. I have a number of modern apps that refuse to open unless I am actively connected to the internet. Desktop (or legacy) apps open fine in airplane mode, but anything downloaded from the Windows Store will not. This even includes built-in apps such as calculator (?).
So far, I have tried:
1. running "sfc /scannow" in Command Prompt
2. running "WSReset.exe"
3. updating all drivers from lenovo
I have tried to recreate it on my desktop (also running Windows 10) by unplugging my ethernet cable and then opening various apps, and it functions as expected - they will open and perform everything normally, unless specifically needing the internet.
Don't get me wrong, I understand that certain apps require Internet Access (Hulu or Netflix come to mind). However, for even calculator to not open without internet seems wrong.