Networking :: 2 Network Drives Missing In Action
Jan 3, 2016
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
View 3 Replies
Similar Messages:
Apr 13, 2015
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
View 9 Replies
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Sep 19, 2015
I have some harddrives on a "server" computer in my home-network running win 7. From my "client" running windows 10 I am mounting these drives using
psexec server -u username -p password -d net share F=F: /GRANT:user,Full /GRANT:media,read 2>nul
net use F: serverF
Today my client crashed and I had to remove the graphics card. Since then I cannot enter my network drives anymore, the commands seem to run, but when I try accessing the drives I get a message indicating I should put a media into these drives. Also, I cannot mount them manually using "map network drive" since the drive letters are not available.
I tried removing them from HKEY_LOCAL_MACHINESYSTEMMountedDevices (they are listed there as "DosDevicesF" etc.), but once I restart, they are there (in the registry) again.
how I could fix this? Win10 somehow seems to remember that thes drives once have been there before and keeps blocking the drive letters...
View 1 Replies
Nov 21, 2015
Well I thought I had this problem solved! I had the same exact issue running Windows 7 so I upgraded to 10. It worked for a few times and now each time I restart, the 3 mapped drives I have show the dreaded RED X. This pc worked perfectly prior to me installing a new Samsung SSD after cloning my OS.
I have a Synology NAS connected via Ethernet and have 3 mapped drives to it (each a separate folder, one for music, movies, and pics). All I have to do is double click the mapped drive and it open right away and the Red X disappears until the next reboot.
Any solid solution or a bat file that will fix my issue? I am not saavy when it comes to this type of thing. I need the mapped drives to work upon startup being I use this pc to load XBMC / Kodi for video playback. Kodi is in my startup folder and when the pc boots up, in Kodi I cannot access the files being the mapped drives are not accessible until I click them. Its a PITA...
This pc is in the basement and I rarely go down there so I boot it up via a WOL app and never have to touch a thing on it hence my dilemma!
Is it possible the SSD loads to quickly and the mapped drives are not visible yet?
View 5 Replies
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Jan 12, 2016
So I've had this issue for about three days now. I am able to connect to my home router, but I am unable to connect to the Internet. Troubleshooter said "One or more network protocols are missing". Not sure what happened, never touched networking except for connecting to my network. I created a thread on Microsoft Answers website. You can view the page here: One or more network protocols are missing on this computer....
View 1 Replies
Feb 23, 2016
What can be done about "Missing Network Protocols", Windows 10 both computers/laptops?
View 2 Replies
Jan 4, 2016
I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it.
View 9 Replies
Nov 7, 2015
I have 5 computers and 4 are running Windows 10. The machine I use as the main one I upgraded from Windows 7 ULT to Win 10 and have had little trouble but, my number 2 machine I added the insider preview 5 builds ago and since then, when trying to view all machines in explorer only the Computers come up yet, on the main machine no problem, all machines that are on the network show up. The pic on the left is the No 2 machine and the one on the right is the No 1 machine. I use assigned IP addresses on all the hardware that show up in No 1.
View 4 Replies
Dec 16, 2015
Missing network device - EXTERNALDRIVE Since the last Windows 10 update which I installed on Dec. 9 I am missing one devices in Explorer > Network on one of three network computers.
They are all present on the other two computers. One of these is Windows 10., the other is Vista Premium.
The complete device list under network is Frankspc, Charlottespc, and Sue_ASUS and ExternalDrive.
The missing device on the Explorer list on Frankspc is EXTERNALDRIVE. I can ping it at 192.168.1.3 . how to get it back in the Explorer list?
View 8 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Jan 22, 2016
Our home network has a desktop and 3 laptops. The 3 laptops all print through the network to the printer attached to the desktop.
For some reason only 1 of the laptops now shows in the desktop network folder. The other 2 have vanished and cannot see the desktop either so no printing. I have tried running both Homegroups and using names & passwords but no difference. I also have a server on the network and that has vanished.
I have checked the credentials and all passwords and names are correct.
I have removed Avast anti-virus and have Windows firewall set to default settings running with Defender.
Windows 10 is the latest version 1511 on all the PCs.
View 2 Replies
Dec 17, 2015
Cannot access the Internet after version 10 is installed on my desktop.
View 1 Replies
Feb 10, 2016
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
View 4 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Sep 12, 2015
I cant create a virtual wifi network using this command : netsh wlan start hostednetwork (the "set" command works)
the solution is to enable Microsoft Hosted Network Virtual Adapter which is missing , and yes i tried to show hidden devices ..
View 3 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Nov 26, 2015
Upgrading from win 8.1 Pro to win10. Seemed to be going well and then saw lost internet connection in systray. Troubleshooting came up with "windows sockets registry entries required for network connection are missing". I can connect to the internet but not to the LAN.
View 7 Replies
Nov 15, 2015
Problem trying to connect to internet on laptop, but all working as normal on desktop.
Investigations revealed....one or more Network Protocols are missing on this computer, also Windows sockets registry entries required for network connectivity are missing....this on both Ethernet and wireless but they had been working perfectly since the update last week.
My laptop supposedly required "Internet connections Package Version 3.0 Publisher Microsoft Windows."
After messing about for an hour without success I loaded the 1511.. ISO.. knowing that I could not connect to the internet to download anything, this seemed to solve the problem, (fingers crossed) I can only assume this made the internet connection possible.
View 9 Replies
Sep 1, 2015
My wife's machine, she has an 'action' button and 'action' panel on her 'task scheduler' window.There is no 'action' button on my 'task scheduler' window.Neither is there an 'action' panel on the right side of my 'task scheduler' window.
View 9 Replies
Jan 21, 2016
After last up date my volume icon said it was not working , I went to trouble shooter it said it was fixed nd to restart my computer. When it restarted the volume icon was gone , the volume works but the icon s gone.
I went to a wed site they said to trying below go to system in action center
go to System / Notifications and actions
click Turn systems icons or off /Volume its there on but turned off and grayed out
then I looked into
Select what icons appears on task bar/It’s there and turned on but in the box there is no picture
How do I get the volume icon back on my task bar ?
View 2 Replies
Oct 4, 2015
I recently have noticed that windows 7 and I just upgraded to windows 10 via the free upgrade, will not show all my hard drives ? On start up they show for a few seconds then go away. Both are WD. One is 500 gb, and the other is a new 1TB. I am not sure when this started but noticed it just recently when I tried to access my pictures on the 500gb drive. I have tried just about everything here with no luck. The 500gb drive does have a windows vista OS on it but the 1 TB is just for back ups etc. All was fine some time ago but now, all I see is my SSD with my OS and an external drive. Also the Hard Drives do show up in Bios. I might have found a reason this happens. Most likely on a windows and / or driver update. On my system the drivers for these missing Hard Drives you can see them in device manager by selecting view / show hidden devices.
View 1 Replies
