Can't connect to broadband connection... The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got:
There might be a problem with the driver for the Ethernet adapter
And
There might be a problem with the driver for the wi-fi adaptor
I am using Windows 10...
Can't connect to broadband connection. The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got "There might be a problem with the driver for the Ethernet adapter" And "There might be a problem with the driver for the wi-fi adaptor". I am using Windows 10 ....
How to create a Dial-up, broadband connection shortcut placed on the desktop. B4 the shortcut I had to:
-1- click on the R-side of the task bar icon
-2- Click on the broadband strip on top
-3- Click on the connection
-4- click on Connect
Creating a shortcut from there (Settings -> Network & Internet -> DIal-up) onto the desktop actually creates an extra step since it defaults to VPN instead--and even if it didn't it would still be 4 steps. Is this any way to make this a 1 or 2-step process?
i cannot connect to PPPoE connection through my modem. when i give username and password provide by ISP, it says cannot connect user nameor password is wrong, but i given correct username and password.
View 4 RepliesI have a odd bug which is causing some of Windows 10's Features to not work. I am using an Ethernet cord, I can still connect but in the bottom it's showing Limited connection and when I click on it, It's showing No Internet and nothing is popping up.
[URL] ...
I have recently upgraded to Windows 10. I am having a problem with all of the web browsers installed on my system (except the one built in to Steam). My conncetion is perfectly fine, but I cannot connect to Facebook or Google on Chrome, Edge, Internet Explorer or Firefox, and can't connect to Reddit on Firefox only. I tried pinging each of these websites on my command prompt and recieved responses each time. These seem to be the only websites affected by the problem. The web browser built in to Steam seems uneffected by this problem.
View 1 RepliesWoke up this morning to find that on my desktop the Store keeps saying "Check Your Connection" and prompting me to reload the page. Meanwhile, Cortana can't pull up interests. It's not an actual connectivity issue, since web+email+everything else works just fine (I'm posting from the same computer now). Tried the obvious things, plus a sfc /scannow with no luck. BTW, I'm not using Insider builds, but I tried to move to it just to see if a new build would fix my PC and it says "Something went wrong, we don't know what." Perhaps that issue is connected as well. It's odd, because nothing has changed recently.
View 1 RepliesWe use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
I am on windows 10, tried to map my NAS using map network drive but says "Windows cannot access Nas102 check spelling or might be problem with your network. Next, I tried to map a specific folder inside Nas102 and it worked! For example Nas102Music I also tried to make a fake folder name and map that for example, Nas102FakeFolder and the error said check spelling of "fakefolder" Nas102 was detected but not the fakefolder. trying to connect to the whole NAS instead of just mapping individual folders inside of the NAS.
View 9 RepliesI have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
View 3 RepliesToday, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
There are a few networks I cannot connect to and I'm not sure why. Most networks like the one I have at home, I am able to connect, however when I am at my friend's house or some cafe, it doesn't let me connect to the internet. I tried updating my drivers and it still doesn't connect. It was able to connect few months ago when I had windows 8.1 but when I upgraded to windows 10, I started facing these problems.
It doesn't tell me what to problem is either. It just says "Cannot connect to network"
I have set up a Homegroup on two laptops which use Windows 10 and both connect to the Homegroup. However, neither will display any computers on the Homegroup.I have tried all sorts of things but all I seem to get from the Homegroup trouble shooter is that there are network problems. I have tried changing the advanced sharing options on both laptops to:
1. Turn on network discovery and ticking automatic setup ....
2. Turn on file and printer sharing
3. Allow windows to manage ....
Then clicking save changes.When I go back into the screen the radio button that I selected for turn on network discovery has been deselected and the turn off button selected. Nothing seems to make any difference!
Ever since I got my computer (which came with Windows 10), I've had trouble connecting to the internet. Every time I shut down and start it up again, it's never online even though I'm using a cat 5 cable hooked directly to the source. My laptop can connect wirelessly, so that's how I know my internet is fine, but it's a Mac (which I'm currently using) so it's a completely different OS.
Usually if I went into the command prompt and did ipconfig /release then /renew, it fixes it, and I'm online. But ever since doing a recent Windows Update that trick doesn't seem to be working anymore. I.E. ipv4 and ipv6 are enabled, tried turning off Firewall temporarily to see if that was the issue, tried uninstalling antivirus software.
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 RepliesSo i recently updated to windows 10, and i noticed i wasn't connected to my Ethernet anymore, so i had to connect my PC to the wifi. Under my "network Adapters" it only shows "Qualcomm Atheros 802.11 1/b/g/n" I tried connecting another ethernet cable, but nothing happened.
View 1 RepliesI cannot seem to connect on Ethernet though Wi-Fi works OK. I have seen several articles about ethernet problems with Win10.
CABLING
First the network config:
Two notebooks, C and D are plugged into a switch and the switch plugged into the router. Now, the cabling is verified to work because computer C, running Win7 connects just fine and if the internet cables are swapped, computer C still connects just fine.
Computer D however does not connect. I did some other things to redundantly check too, just FYI.
So cabling looks OK.
ROUTER
both computers have fixed (reserved) IP addresses in the router.
The router sees computer C
but not computer D
Just FYI, if I turn on Wi-Fi, the router sees D on WiFi, but not the ethernet.
PING
Computer C can ping D
Computer D can ping C
Computer C can ping the router
Computer D cannot ping the router
Some investigation suggested the following, all of which I tried with no better results:
- Update the network adapter drivers (already current)
- Winsock posible culprit, so NETSH WINSOCK RESET and reboot - no change
IE used to find and fix these things pretty well, but here we have EDGE. Perhaps I'll try to install IE. Connectivity diagnostics are where IE shined over Chrome and Mozilla.
UPDATE: IE 9, 10, etc. are not compatible with Windows 10. So, the connectivity diagnostics just not as good in Win10. I can tell I am getting tired, as it's getting hard not to swear.
UPDATE: Added a pretty picture.
I upgraded to Windows 10 two months ago. Last week, I lost networking. I've scanned the posts and haven't found a solution.
Network troubleshooter says adapter might be the problem, device manager shows adapter working normally. Power saving not enabled. No VPN installed. Original adapter is Broadcomn NetLink Gigabit Ethernet.
Too late to roll back to Windows 7.
Installed new Realtek PCIe GBE Ethernet adapter that is Windows 10 compatible. Tried an old USB Netgear wireless approach.
Cannot connect desktop to network at all. All other tablets, laptops work fine.
Tried all suggested command prompts (netsh, etc).
Tried updating drivers by downloading to tablet and then transferring to computer.
Have 4 computers & NAS on the "Workgroup" within a private network. Most are using static IP addressing, one is using DHCP.
Two are Windows 7 machines, two have been upgraded to Windows 10.
The "Network" on the windows 7 machines show everything including the windows 10 machines and the NAS.
Both of the Windows 10 machines show both of the windows 7 machines but not the other windows 10 machine nor the NAS.
The NAS can be connected to the windows 10 machines using the app even though they do not show up on the windows 10 machines "Network". (Not a real problem & has been addressed in other forums)
When ARP -a is run on any of the Windows 7 or 10 machines, all the other IP addresses are there including the NAS.
All of the machines can ping the other IP addresses on the network.
It would seem that something in the Windows 10 OS is not allowing the other Windows 10 machine to show up in "Network".
Windows 10 appears to be a great upgrade even without the network mapping feature that was in windows 7 nor showing the NAS.
Prior to upgrading the 2 windows 7 machines (now on windows 10) to windows 10, everything was working just fine. Four computers and the NAS were showing up in "Network" and connectivity was excellent.
Before I convert the remaining two Windows 7 machines to Windows 10, I must know just what is causing this issue and the solution. The inability to communicate between these two computers, if not solvable, is a deal breaker.
Title says it all.
View 5 RepliesMy PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 RepliesI upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
I updated to Windows 10 from Windows 8.1
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
disconnect 1-2 min say "login another user"
i have win 10 pro im change remote resvices session time limit and another method but not solved...
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card
Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.