Networking :: Can't Browse Network Shares
Nov 17, 2015After 1511 update this morning and changing nothing else, I can no longer access computername..
View 1 Replies
Similar Messages:
Networking :: Cannot See Computers On Network Shares
Feb 10, 2016I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
Networking :: Unable To Map Network Shares?
Nov 15, 2015I've got 2 Western Digital Network drives hard wired on my network, a My Book World and an EX2.
Since upgrading to Windows 10 I've had intermittent problems viewing and setting network drives. I've read a lot of other posts and tried a number of things suggested without success.
The WD Discovery tool finds the Network drives, but the box to map network drive is greyed out. I can access the desktop control panel from my browser. If I try to add a network location the drives are not listed. If I try to add the drive letter WDMYCLOUDEX2Public the network path is not found?
I have another Windows 10 computer on the network which can access the drives without issue - so it must be a setting on my PC. Tried disabling my Kaspersky security - still not being seen? I suspect that this has been as a result of a windows upgrade?
Networking :: Cannot Access Windows Network Shares
Jan 25, 2016Three machines:
Surface Pro 4 - fully updated
Surface Pro 3 - Windows 10, fully updated
Lenovo X220T - Windows 8.1 Fully updated
All three machines can see all available network devices, including each other.All three machines can successfully access and interact with third party network devices. In this case, it is a NAS and a network printer.The windows 8.1 machine can access each of the other windows 10 machinesNeither Windows 10 machines can access any other windows share on the network.
This gets me error 80070035 with diagnostics telling me nothing
All three machines are on a Homegroup and while each can see, no one can access anything
Trouble shooting tried:
Double checked all sharing settings on all three computers. They are identical.Double checked workgroupsTried it via IP addressesReset winsock on all machinesFlushed DNS on all machinesReset the routerUninstalled and reinstalled Windows sharing and about 3 other network protocols and servicesEnabled NetBiosran this: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi sc.exe config mrxsmb20 start= disabledMessing around with all sorts of netsh commands clearing and flushing all sorts of other things
Networking :: Shares No Longer Visible Can't See Other Shares
Feb 23, 2016I just switched to a new router (from DLink DIR-655 to TP-Link Archer C7) and now my Windows 10 Pro cannot see network shares nor can others on the network see its shares. Prior to the router switch, it could see shares and others could see the shares it exposed.
The Win10Pro can see the internet. I can still ping other computers and they can ping the Win10Pro, just no Windows sharing. All computers are in the same Workgroup. I am not using a Homegroup; computer connections are made with user accounts.
The Windows 10 Pro is connected via wire. When I made the switch, I remember that Win10 came up and told me it had a new network and prompted whether to allow network discovery - to which I said yes. I thought that odd at the time since changing the router didn't change the NIC connection from the Win10 -- but whatever. However, it did change the IP address on the Win10Pro from what it was. But I've since rebooted all computers (thinking that might cause them to refresh) but no improvement.
Advanced Sharing Settings are set as:
Private: Network Discover = ON, File and Printer Sharing = ONAll Networks: Password Protected Sharing = ON, Public Folder Sharing = ON
Networking :: Network Settings Says No Internet Connection But Can Browse Internet
Oct 14, 2015But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
Networking :: Samba Shares Don't Show Up
Nov 22, 2015I was running Windows 7 on my laptop. I have a file server running Linux and Samba. When I open the Network icon in Windows 7, I see my server there and I can open it and access the associated folder shares.I upgraded to Windows 10. Now if I double click the network icon, I don't see any machines except my local client laptop. However, if I enter the UNC path to my samba server (myserver) into the path bar of Windows Explorer, I can access the server. If I want to add a network printer to my laptop that is shared by the server, it won't find the server in the search list. However, I can enter the literal UNC path to the printer and add it. So it has something to do with nmb I think? Not sure.
View 9 RepliesNetworking :: Can't Access The Default Shares
Aug 6, 2015I have two Windows 10 PCs on the same home network and I can't access the default shares on either one of them, I keep getting 'Access denied'.
View 9 RepliesNetworking :: Accessing Administrative Shares
Feb 10, 2016I have a networked Windows 10 Pro computer A with built-in 'Administrator' account disabled. However, it has a "normal" administrator account named 'Admin'.
I would like to access administrative share 'AC$' from another computer B in the network. Windows asks me for access credentials. I enter 'Admin' and the corresponding password. This results in "access denied" error.
Hence the question: What's preventing the access?
My guesses are
1. (Unlikely: ) Administrative shares are accessible to the built-in 'Administrator' only.
2. (More likely: ) Administrative shares are accessible to a designated set of users and there's a way to control it. My homemade 'Admin' is not on the list.
3. (Most likely: ) Network access to administrative shares is completely disabled by default in Windows 10, but can be enabled somehow.
Networking :: Can't Write To Unix CIF Shares
Jan 4, 2016I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
View 8 RepliesNetworking :: SMB To Shares On USB Storage Does Not Work
Nov 29, 2015I have several usb-connected drives and several SATA drives on a Win7Pro-64 system just upgraded to Win10. The only account on the machine is a local administrator account. On each drive I have a shared folder.
Where before I could connect via SMB/Samba from non-Windows networked devices using the local account credentials, I can now only access the shares on SATA drives. Any share on a USB drive is inaccessible to, say, ES File Explorer or Astro on a Android Tablet (although the share name can be read).
I can still access all shares from another Windows 10 machine. All devices have the proper Workgroup.
Clearly there is some SMB policy change in Windows 10. I've seen one fix for network drives but it doesn't seem to apply here (and also doesn;t work). Also not working is anonymous login to shares with with Everyone access, which also used to work.
Networking :: Unable To Browse Internet
Feb 10, 2016My husband & I try to remotely support his father's HP desktop. In the last month or so he can get email, TeamViewer for remote access works fine we can ping websites by name and IP but cannot browse to them by name or IP. We have done all the things recommended on MS site for Fix Network Connection (Fix network connection issues.
We have reset router and cable modem, verified network drivers, flushed DNS, verified browser DNS settings. This computer is hardwired, other computer on wifi on same network works fine. We are 5 hours away. We made a generic "recovery drive" on a flash drive and sent it to him but usb keyboard and mouse won't work for him to use that option. Tried ps2 mouse, won't work. We don't know where to go next. Initially ran Network troubleshooter few times with no errors found. Now it gives Missing Protocol, says it fixes it, but doesn't.
Networking :: Homegroup - Accessing Shares Asks For Credentials?
Jan 26, 2016Several PCs in my store.. some running W7 starter, some W10 Home pro.
A few days ago suddenly I could no longer access a folder on another W10 computer, where we tend to store a lot of important documents. The computer where the other folder is, runs also W10.
Shares are usually done vie HomeGroup - share with home group users.Other computers on the network have no problem accessing it. Furthermore, I can access it from another local account on my computer, but not from my main account (which is a MS account)..It asks for credentials, although I am a homegroup user.. nevertheless I enter the other computer's only username and password (admin ones) and it still does not let me in. Try my own MS user and pass - also "wrong".
Tried leaving and joining the Homegroup.
Tried restarting network related services and setting them on Automatic.
Tried homegroup troubleshooter - says probable problem is with network, so should run Network troubleshooter.
I do so and it shows error:This network troubleshooter shows error: resource (peer to peer grouping) is online, but not responding to connection attempts.
Following the latter and some google searches, I tried adding DisabledComponents" DWORD with "0"value in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesTCPIP6Parameters
But still NO-GO.
Networking :: Workgroup Shares Windows ID Versus Local Accounts
Nov 10, 2015I have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
Networking :: How To Set Shares Using MS Account - Works Fine When LOCAL Account
Jul 2, 2015Using a LOCAL account I have no problem with Shares -- how do I set these now using an Ms account.
Samba just times out trying to access Windows machine where I'm logged on with an Ms account. Also I can't access other Windows machines from the Ms account. The other Windows machines can't access the Windows machine where I'm logged on with an Ms account.
All these problems DISAPPEAR when using a LOCAL account.
I think my future strategy will be just keep a MINIMAL Windows VM with an Ms account to GET the insider builds and then revert back to Local accounts.
Networking :: Find Network DVR In Network And Sharing Center?
Oct 1, 2015How do I find my network DVR in Network and sharing center?
View 4 RepliesNetworking :: How To Rename Network 2 To Network 1
Sep 5, 2015Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 RepliesNetworking :: Can't Connect To Network
Dec 4, 2015Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
Networking :: Connecting 2 PCs Without Network
Mar 5, 2016I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 RepliesNetworking :: Network Security Key
Dec 16, 2015I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 RepliesNetworking :: Can't See Other Computers On Network
Jan 4, 2016I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
Networking :: Can't Access Network
Jan 10, 2016I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
Networking :: No Network Access
Nov 8, 2015Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.
IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.
Fixed. Updated drivers worked. Just had to restart a couple times for it to work.
Networking :: Can't See Network Printer
Feb 10, 2016I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
Networking :: No Network Connection
Mar 5, 2016I have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Networking :: No Network Connectivity
Feb 10, 2016I suffer total loss of network connectivity after a computer crash. I am on win 10 x64
Here is my ipconfig /all:
C:WINDOWSsystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Xello
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code] .....
Windows troubleshooter reports that "One or more network protocols are missing on this computer".
Some other info: I am unable to connect to 192.168.0.1, which is my router's home page. I can load this page on my laptop if i connect my laptop with ethernet, so the router is fine.
