I'm using windows 10 and I'm trying to connect to a printer attached to a remote networked Windows 7 Pro computer. When I go to Settings/Devices/Add printer my printer attached to the remote computer shows up. When I click on the printer I get a window that says "That didn't work". We can't install this printer right now. Try again later or contact your network administrator." How to handle this??
I have a 2 desktops and a laptop all running Windows 10 Home.
I have a Homegroup that is working and I can see and access the shared folders on each machine.
I can see and connect to the printer on Desktop 2 from the laptop but not Desktop 1's printer. That printer is on and working properly on Desktop 1.
This previously worked fine. I think it stopped working when I updated to the new Windows 10 update yesterday on the laptop and Desktop 1. Desktop 2 has not yet been updated.
I have rebooted both computers and ran the Homegroup Troubleshooter which could not find any problems.
Win 10 computer can see the XP machine and access shared files, like wise from the XP machine. I can remote control the XP computer using Desktop Connection, it works great. What I cannot do is remote control the Win 10 computer from the XP. File sharing and network discovery is setup on both. The network was established before Win 10, as the group is WORKGROUP. Too many devices to go through and change over to HomeGroup.
The XP computer is the professional version with Remote Desktop installed. I do not get any numerical error msgs to track down the problem. I have tried using the IP address and computer name but neither work.
I am looking for a Remote viewer application that i can use to look at my other Windows 10 box from my windows 7 desktop. I can use RDP but i want something i can use to just view the desktop, i have dameware but does not work with Windows 10. any application that free out there. ive also tried Push vnc doesnt work either.
I am having problems setting up remote desktop. I can not find the program in windows firewall to enable it. was just wondering if this would be due to my copy of windows 10 is not activated?
If remote computer has user password all works well,but if no user password can't log on. In windows 7 this was not a problem,is there a work around so if two windows10 computers have no user passwords you can connect?. This is on a private home network. Don't want to use third party software for this process.
I am using windows 10 .I have issues to access with Remote Desktop .I did not see any settings related to Remote Desktop.i can see option for Remote access.how to get Remote Desktop option .
I have been unable to find anything. It's quite simple, the Remote Desktop options have both become greyed out. The 'allow remote requests' is still available. I have seen posts saying to check group policy, but I have done that and I have no group policy settings set.
I bought a new laptop with windows 10 mainly for remote desk top connection. When I connect to the server remotely the icons and letters are very tiny.
Is there any new app other than microsoft remote desktop connection?
I have related issue. Every time Windows 10 forces a critical update. The computer ends up on the lock screen instead of finishing loading as it does on normal restart. It's a problem becuase the computer is remote location. So every time critical update happens. I blocked regular updates. can't connect then to drive 40 mins to slide the screen. I created task that reboot:s it nighly but that doesn't work as its not fully loaded.
Recently I upgraded my work computer to windows 10 pro. Just found if I want to connect to a remote computer on a port other than 3389, it doesn't let le me put : just like I can do in previous version "server name/IP address: port number" comes up with error saying "remote computer name is invalid" if I go ahead and click connect shows "The computer name is blank or it contains invalid characters. Try typing it again. Invalid characters include spaces, tabs, ;:<>*+=|?," "
after installing a replacement GPU, RDP now only connects to the home server when i have "use all my monitors" enabled.If i have it unticked the session will try to open on my second monitor - which is connected to the onboard GPU, unlike the first, which is connected to the discrete one - as usual, but blurt out a connection error after starting to render the remote desktop.If i tick "use all my monitors" in RDP settings, a connection is made, but displayed on my main screen.
I never had this problem on Windows 7. But when I remote to a Win 10 PC, start a process, let's say copying files, when I close the connection (via the X at the top...NOT disconnect from start menu), it closes the copy process.
Are there some new settings or something that I need to change to correct this?
I've been noticing that RDP is a toss up on my Windows 10 machines. It hangs and I have to close the connection, then try again and get an error stating it's not available because it's busy, then try a third time after a few minutes and it works. I have disabled connecting to printers, clipboard, smartcard, etc. and still have the problem.
I have recently upgraded to Windows 10. I have a homegroup setup on my home network which allows me to share the music files stored on my PC with phones & tablets etc for streaming.
Since the upgrade when I access the files using Apps like BubbleUPnP or MConnect the music files are all shown in one giant folder rather than being sorted into the sub folders (Artist, Album etc) as it is on my PC.
This problem has only occurred since upgrading to 10. I reverted to 7 to check and everything went back to normal.
I have noticed since upgrading to Windows 10 I am unable to Log into my work network which uses Server 2008. It keeps giving me the following error. I have added it to the compatibility mode settings but still get the same error. This is the following error I am getting " The wizard cannot configure Remote Desktop Connection settings. Make sure that the client version of Remote Desktop Protocol (RDP) 6.0 or later is installed on this computer"...
I work for a small company, with a network of 25 users. We have recently replaced 4 of the users with new Intel machines.
All of the other machines on the network have retained their ability to print to the network printer after the Windows 10 update, but the four new machines cannot even see it.
I have tried the usual process of adding a printer using the wizard, and also tried locating the printer manually using the printers network address.
The closest I have got is a message telling me that the driver could not be located - i tried connecting the printer directly to a new machine in order to install the driver, before disconncting the printer and trying again through the network. I received the same 'No Driver' message.
It is worth noting that the printers access point to the network is via a Vista machine in the admin department.
I've installed W10, a couple of days back, and things don't go as smoothly as I had hoped. I have a couple of issues and lets start with using printers via the local network.
I have a Windows 10 computer, let's call it PC1, and there's a Windows 7 computer next to mine, say PC2, both connected on the same switch.
In another room there's a Xerox WorkCenter copy machine/printer, connected directly on the lan. Let's call it PRNT1. On PC2 there's a shared HP laserJet 1000 series, let's call it PRNT2.
On PC2, I run "find printer" and it locates PRNT1 and can use it with no problem.
To the PC1 (W10), now: when I run "find printer" it doesn't see any of the two.
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
I had Windows 7 on the main computer at home. The printer was attached to that computer, with sharing turned on. Other computers in the house, some upgraded to Windows 10 and some not, could all use the printer. Now i have upgraded that desktop to Windows 10, and no one else can print to the printer.
I have a new Windows 10 system (A) which has a printer attached. I'm trying to share the printer with another computer (B) also running windows 10, both computers can see each other on the network but when B tries to look at A it gets a message that it can't access A.The printer is shared and as a far as I can see file and printer sharing is enabled but the add printer routine can't find it.
I can see A and it's shares on a W7 computer (C) on the same network without problem and it has detected and can use the printer.All computers are in the same Workgroup and both W10 machines (A+B) are in the same Homegroup.B was able to use the printer when it was attached to D, unfortunately D is now dead and replaced by A.