Networking :: Can't Get Internet Access On Two Computers
Feb 23, 2016
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
View 9 Replies
Similar Messages:
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Jan 6, 2016
OK, so I have this one Windows 10 computer.
When trying to access a Windows 8 computer under "Network", it prompts me for a user/pass.
All other computers (Windows 7/8) can see the public folders of each other no problem; even the public folders of this one Windows 10 computer!
View 1 Replies
Feb 10, 2016
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
View 3 Replies
Nov 2, 2015
I just updated to Windows 10 but I think the problem was with Windows 8 too, Sometimes my internet is out on my PC while the internet is still up on my brothers PC, tho this problem happens about 3 times a very few days.. We have 5+ computers in the house and 4 are on daily while 3 is being used daily the 4th one is not very used daily and sometimes off most of the time. So the 2 computers have Windows 10 and 3rd computer has Windows 7 while the 4th computer has Windows 10 also. I read on an article which says that Windows 10 uses bandwidth without you know and I checked task manager and on windows 8 my CPU and Memory was just fine and when I upgraded to Windows 10 my CPU spiked to about 20% and Memory spiked to about 72% and sometimes random numbers appear on all 4 sections( CPU, Memory, Disk, Network).
View 9 Replies
Nov 24, 2015
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
View 8 Replies
Aug 9, 2015
Upgraded to windows last week and all has been great. Today, I lost internet connectivity on my Windows 10 PC this morning. I still have Network access to view the Windows 10 machine from the rest of my network. . Restarted the router and modem and still no internet access. Device manager says no issues with my Realtek Network card.
View 4 Replies
Feb 10, 2016
Recently my laptop has a boot error and auto recovery and maintenances could not solve the issue. So I reset the laptop but kept the files and now it boots perfectly fine however none of the internet is working. It shows that I am connected to the wifi but there is no access whatsoever. I even uninstaled my network adapters and even tried a wired conmection and everything seems to not work. All my other devices are connected to the router perfectly.
I am using a lenovo y50 touch with windows ten 64bit.
I have already tried updating drivers, deleting temp files, disabling firewall (antivirus was removed from reset), and already tried the ip config release and renew.
View 4 Replies
Dec 21, 2015
so i have recently upgraded to window 10 and im having some issues with my internet. so the problem is that it keeps on saying "no internet access " and theres also a yellow triangle on my wifi icon.I have watch so many tutorials on how to fix this but still havent found the right solution.ive tried things such as reset my router,flush my dns,reset my ip,update/uninstall my driver,changing power options .
View 6 Replies
Jan 5, 2016
I installed Windows 10 yesterday on 2 lap tops. Everything was fine, i could access the web. I installed it on a third one this morning. It was seeing the network but said it could not access it. I changed the password in the rooter thinking that it would ask me for the new password has Windows 7 does. But it did not.
Now I also have the same problem on the 3 lap tops. I cannot find the place to put in my password like I did on Windows 7. If I try to access 'manually' it does not recognize either. I know it is not my rooter because I was able to access the new password with an old lap top still on Windows 7 and also with my cell. So password and rooter work fine.
View 8 Replies
Jul 30, 2015
I recently upgraded my laptop to Windows 10. Since then, I can not connect to Internet at all. The cable says no Internet when connected and wifi says limited access when connected. I am posting this through my phone because my laptop keeps saying limited access.
View 12 Replies
Jul 31, 2015
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
View 9 Replies
Aug 1, 2015
Yesterday I updated my Windows 7 desktop PC to win10, and my internet worked perfectly, both wired and wireless. But today, it just stopped and until now it is still like that, famous yellow triangle. Wifi works. Tried almost everything, changing from DHCP to static, disabling firewall, updating/reinstalling network drivers. I am not using any VPN as far as I know. My network adapter is nvidia nforce.
After switching to static address, I noticed that my adapter changed from unidentified to network, but still in the status window of my adapter i see that ipv4 and ipv6 have no internet access. As I said, other devices work perfectly via wifi.
View 9 Replies
Feb 14, 2015
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
View 9 Replies
Feb 23, 2016
This just happened recently, and still not fixed.
My router modem is changed. The internet works properly in any other devices which are not win10.
From the wifi connection: it's connected to ssid but no internet access. I cant even ping the gateway. And from the troubleshooting it mentioned that some protocols are missing.
View 4 Replies
Dec 29, 2015
I'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
View 3 Replies
Oct 6, 2015
I am now encountering a series of bugs that i've never seen before in any windows.
OS: Windows 10 Pro official 64
Connection type: Wifi, no firewall activated
Applications impacted: Steam unable to connect, Google chrome unable to connect to install software, Mozilla Firefox same thing, and probably more apps get the same problem but i can download them and install if the installer doesn't have to download anything. It seems like a services that is not working inside windows installer.
I am able to navigate in Microsoft Edge, and some other apps, but unable to install other application, it is like the firewall is blocking the internet acces but the problem is no firewall are activated right now , nothing has been changed to the router settings as other computers on windows doesn't experience that problem. See screen captures below...
Screenshot 1 : it says check you firewall setting to put chrome to your white list
Screenshot 2 : your download has been interrupted, click ok to continue ( nothing has downloaded not even 1% )
Screenshot 3 : it's in English already just read...
View 9 Replies
Mar 5, 2016
Almost every time I open the start menu, I get the proxy authentication popup, despite ticking the box save the details. There are also a whole bunch of potential proxy servers which can be connected to (I'm at university), and it randomly selects which one to connect to (as this would be the default for "automatically detect settings" in Internet Options.
Cortana isn't available in my country, and I've changed the search menu to not use bing to find results. I have no internet-accessing apps pinned to start. Why is it constantly trying to access the internet? Why won't it save my details after the first login despite it trying to access the same proxy? Maybe too many proxy requests lined up after each other?
View 9 Replies
Jan 3, 2016
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
View 1 Replies
Jan 6, 2016
I have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10...
A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
View 9 Replies
Oct 16, 2015
I work for a small company, with a network of 25 users. We have recently replaced 4 of the users with new Intel machines.
All of the other machines on the network have retained their ability to print to the network printer after the Windows 10 update, but the four new machines cannot even see it.
I have tried the usual process of adding a printer using the wizard, and also tried locating the printer manually using the printers network address.
The closest I have got is a message telling me that the driver could not be located - i tried connecting the printer directly to a new machine in order to install the driver, before disconncting the printer and trying again through the network. I received the same 'No Driver' message.
It is worth noting that the printers access point to the network is via a Vista machine in the admin department.
View 1 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Jun 24, 2015
I'm finding Windows 10 enjoyable and pleasant for the most part.
Unfortunately, some things that are easy to find or to do (probably due to years of experience) in Windows 7 and 8/8.1 are not easy to find, assuming they exist at all, in Windows 10 build 10130. For instance, I've looked high and low for "Change PC Settings" and it is like the proverbial needle in the haystack.
My present problem is that I can't see other computers in my network/workgroup. They are visible to my Windows 7 and 8.1 computers. My network is set to private in Windows 10. Find devices is set to on.
I note that I can ping all my devices, Squeezeboxes, WDMycloud hard disk, chromecast, computers etc., and the squeezeboxes, Logitech Media Server , WDMYcloud and Chromecast are showing up as devices.
View 9 Replies
Nov 15, 2015
I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
View 6 Replies
Nov 20, 2015
suddenly none of my computers can log onto my homegroup. They all say one is available, but when I put password in it just keeps running as if it is looking but can't proceed. I am not able to change homegroup either.
View 3 Replies
Feb 10, 2016
I have 3 computers on the network. All have shared folders . My problem is as follows.
Lets call the computers c2, c3, c4. I am using network shares
When on computer c4 , computers c2 and c3 are not listed at all under network. Sometimes I do see c3 listed but cannot access it.
In computers c2 and c3 , all computers are listed and I can view all the shared folders in c2 , c3 including those on C4.
I cant understand why c4 have such problems viewing other computers on the network. I have rebooted router ( E4200) and computers but still have same problem .
All shared folders are properly shared. and no passwords are required for networks in adv sharing .
View 1 Replies
